How to iron pants with arrows, tips for male and female models
In the wardrobe of young girls and middle-aged women, the hem of skirts and dresses, as well as in men there are sports, home and elegant trousers. Many housewives are interested in how to iron cotton or woolen things so that wrinkles do not appear on them, the fabric does not shine. In order not to spoil your clothes, you need to set the correct mode on the iron. If denim is steam ironed at 160 ° C, the temperature is reduced to 70-80 degrees for silk fabric.
Where to start
It is necessary to iron clean pants, even an imperceptible stain increases in size, is imprinted in the fibers. It will not be possible to quickly remove the contamination. Before ironing, you need to look in the pockets and take out the change, turn the pants over.
Coaching
From the label on the pants, it is necessary to know if it is ironable, which mode to choose. It is recommended to spray dry corduroy, cotton and linen clothes with water from a spray bottle and fold them in polyethylene for a quarter of an hour. Silk pants are wrapped in a damp towel, as spills leave marks on the fabric.
site preparation
Clothes are ironed on a flat surface. A table with a bedspread that can withstand high temperatures is suitable for this purpose. It is better to use an ironing board that adjusts, fixes, fixes the legs.
What is necessary
In addition to arranging the ironing area, other things are needed.
Iron Man
Thin fabric is needed if the pants are made of polyester, wool, silk. To smooth the belt, pockets, cuffs, first moisten the gauze, lay it in these places and carefully iron it with an iron.
Tailor pins or stationery clips
Straight arrows on classic pants turn into curved lines after washing or disappear completely. Clips and pins help bring "beauty".
Spray bottle with water
If cotton or silk items are dry, it is almost impossible to iron them. To make the fabric wet, it is sprayed with a spray bottle.
Towel
To shape the pants, point the arrows and dry well, the product is wrapped in a thick fluffy fabric. A terry towel is used for this purpose.
A sheet of cardboard or thick paper
So that the seams and pockets are not printed on the pants after ironing, a thin fabric or other material is placed under the burlap - a piece of cardboard, paper.
Temperature regimes
After installing your ironing board, it's time to start ironing. Depending on the fabric from which the pants are sewn, you need to select the pressure and temperature settings.
Decode the label
Businesses that sew clothes provide advice to customers on how to properly wash and iron their clothes. You can find the optimal mode from the shortcut.
Recommended ironing settings by material
In case of loss of the label on the pants, knowing what fabric the item is sewn from, it is easy to choose the way of ironing.
Cotton
Pre-moistening is required for products made of poplin, natural corduroy. The temperature at which it is advisable to iron cotton trousers should be at least 140, at most 170°C.
Linen
The summer jumpsuits are made in a light material with a matte shine, whose fibers are of vegetable origin. Iron such items upside down, having previously moistened them at 170-180 degrees.
cotton + linen
Sprayed from a spray bottle with water, ironed with strong steam and high pressure at a temperature of 180 ° C pants, sewn from a mixture of natural materials - linen and cotton. Before the procedure, the product is turned over to iron it from the inside out.
Wool and semi-wool
For a solemn event, an evening in a restaurant, neither men nor women wear jeans. Replace these pants with pants of different cuts in wool.The thing is ironed through wet gauze, setting the mode with steam and the temperature not higher than 120.
Polyester
The artificial fabric obtained from petroleum refining is durable, pleasant to the touch and resembles wool. Synthetic or polyester textiles can be washed in cold water without steam. The iron is set to minimum heating mode.
cotton + synthetic
To make clothes durable, attractive, well worn, chemical fibers are added to natural fabrics. Products made from a material where cotton is combined with polyester are sprayed with water and gently ironed at 110°C.
Wool + Synthetic
Warm pants made of material containing artificial fibers and wool are ironed on a damp gauze or cloth at a temperature of not more than 120 degrees.
Corduroy
At the end of the last century, cotton garments with heavy pile and raised ribs were particularly popular. Wet corduroy pants are ironed from the inside out with a towel or blanket, the steam mode is selected and the temperature is about 140 and 100 ° C, if elastane fibers are present in the material.
Chiffon
Thin and light transparent fabric, made by weaving cotton and synthetic fiber threads, is breathable, looks exquisite, retains its shape. The muslin is ironed through a damp material at 60°C, not steamed.
Nylon
Products made of synthetic fabric, based on polyamide, have shine and strength, do not wrinkle, do not stretch. Nylon garments are ironed at 60-70C°. At higher settings, the material melts.
jeans
Items made of this fabric are durable and very practical, serve the owner for more than 10 years, do not wrinkle, air well, do not stretch.Jeans are steamed from a steamer, turned over on the wrong side, steam ironed at 150-160 ° C.
Jersey
It is not recommended to iron trousers and suits made of knitted textiles. The fabric is stretched, folds often form on it.
If necessary, the knitted pants are turned over to the wrong side and ironed to the loops, setting the vertical steam mode and the minimum temperature.
how to stroke
Having determined from what fabric the pants are sewn, having chosen the necessary parameters, they begin the process.
On the sordid side
First, the clean pants should be turned inside out to iron the padding material.
Pockets
The gauze is moistened with water and wrung out so that the fabric does not get very wet. Lapels, belt, welt and patch pockets are ironed through, without pressing the iron on the product, otherwise all this will be printed outside. Every crease on the material should be smoothed out.
Side seams
Pants made of soft fabrics - flannel, wool, linen, rolled up after washing. They are ironed from the inside out so that the ends of the fabric are facing the opposite direction and the side seams are aligned.
From the front
Place both legs together, bringing the bottom edges together. One of them is turned towards the belt in order to iron the other part of the pants without touching the arrows. Products should be turned over and repeated from the front side, but ironed through cheesecloth.
seam joining
The pants are put on the board and a pillow is placed under the fabric. The feet are ironed by turning around the axis with the non-ironed side so that the folds do not appear. Taking the products from below, they connect the seams from above, make sure that the outer and inner seams are combined, straighten the pants.
jerky movements
To iron the front, you need to put wet gauze on it. The thermostat is set to the mark indicated on the label, ironed over the entire surface, lifting the iron from the fabric and applying it again to the fabric.
Priority rule
First they look at the trouser leg from one side, then the other. Then they take the second leg, perform similar movements in the same order.
how to make arrows
Although men, girls and middle-aged women have long worn jeans, office workers or bank workers wear classic pants with ironed arrows.
How to fold correctly
Before "doing the beauty", the product is carefully straightened along its entire length, the welt pockets are turned over.The legs are bent so that the seams coincide, which are first connected from below, then from above.
Is there a difference between men's and women's clothing
Ironing pants designed for the stronger sex and the weaker sex alike.
The only difference is that in women's models there are darts that must be aligned with the fold line during ironing.
How to iron arrows correctly
4 darts are made on classic women's pants. From them they begin to direct the arrows:
- The knee area is ironed through a damp gauze.
- The hem is tightened by hand.
- Sequentially move from one section of the leg to another.
- Smooth the forward dart to the right side, move to the left.
In the process, the seams are secured with pins. The iron is rearranged each time.
How to save before washing
In order for the ironed arrows to last a long time and the clothes to look elegant and neat, the fold lines are wiped with soap on the front and back sides, the folds are ironed through a gauze soaked in vinegar.You can fix the arrows with potato dough, smearing the inside with a small layer.
How to fix ironing errors
Skinny clothes are not always neat, sometimes stains appear on them and the fabric shines. To remove the disintegrating arrows, the gauze is moistened in a solution prepared from a liter of water and 40 ml of vinegar, and wiped from the wrong side. Then the pants are smoothed again, the arrows are made.
How to Remove Weasel and Shine
If the clothes are covered with shiny stains, the problem areas are soaked in laundry soap for a quarter of an hour, rinsed and hung in the fresh air.
cotton and linen
To remove shine on dark pants, rub the problem area with a composition prepared from 2 tablespoons of water, 15 g of salt and such an amount of ammonia. On cotton and linen fabrics, the shiny stain is removed by infusing black leaf tea. A tampon is soaked in it, lightly ironed with an iron. The product is soaked in sour milk, washed down with clean water.
Mixed fabric
It is possible to safely remove shine from trousers whose material contains different fibres, in the simplest way:
- A solution is prepared from soap without impurities and fragrances.
- The composition is recruited on a small brush.
- Wipe the shiny place.
When the fabric is dry, iron it through cheesecloth. The arrows are made with care.
Wool
You can get rid of the shine of the pants, which appeared after breaking the rules of ironing, using different solutions. A shiny woolen thing is wiped with a cotton swab dipped in the composition. For its preparation, alcohol and water are mixed in the same volume, 5 drops of aromatic liquid soap are poured into it.
Wipe stains with ammonia until they disappear. The treated area is ironed through gauze or a thin cloth.
Synthetics
Chemical fiber pants often shine after ironing. It is recommended to remove shine with steam, using laundry soap, lemon juice, tea leaves.
Dark suit fabric
Shiny spots on black or brown materials are removed with vinegar by mixing a spoon of the substance in a liter of water. Gauze is moistened in the solution, applied to the shiny area in a single layer, steamed. The vinegar leaves streaks on the costume fabric, but they disappear after washing.
Treat Iron Marks
If the wrong temperature is selected, yellowish marks will remain when ironing the pants. It is not necessary to throw the thing away, there are several ways to restore the product to its attractive appearance.
Lemon and powdered sugar
To remove tan marks, sour citrus juice is applied to the damaged area. A few minutes later, a little crushed sugar is poured into the same place. When the pants are dry, wash without detergents.
Onion porridge
If after ironing a yellowish strip remains on a light-colored fabric, you can use an old folk recipe. To do this, apply a porridge from the onion to the stained area, leave it for 3-4 hours. Pants should be washed with scented soap to remove an unpleasant odor.
Vinegar and salt
You can save clothes from bright stains with the means that any housewife in the kitchen has. On the tan marks on the suit fabric pants, apply a gauze soaked in a composition prepared from a liter of water and ½ cup of vinegar, and iron it with an iron, selecting the steam mode.
To remove the stain:
- Table salt is mixed with liquid.
- The resulting mush is rubbed onto the trail.
- Residues of the substance are cleaned with a soft brush.
When the treated area is dry, the pants are rinsed and dried. After ironing, they will no longer shine.
3% hydrogen peroxide
You can remove yellow stains from linen fabrics if you apply a mixture for a quarter of an hour, which is prepared from the same amount of ammonia and hydrogen peroxide.
How to smooth double arrows
Sometimes, instead of a crease after ironing, the clothes receive 2 creases. To remove them, select the heating temperature:
- The pants are moistened with water.
- The trouser leg is placed on an ironing board.
- Hot steam is allowed under the arrow, the iron is removed and a book is put in its place.
- I press the load with my hand, hold it for half a minute.
Too high a temperature will stain clothes. To remove the arrows, this indicator should not be lower than the one set when pointing them.
Some features and tips
Ironing pants made of natural and synthetic fabrics has its own nuances, but it also requires the implementation of general rules.
Additional deduction
Hands hold better if you wipe the fabric from the inside with dry soap.
Only through the fabric
Ironing the front of your pants may leave marks or streaks. In order not to spoil the thing, it is ironed through cheesecloth or thin natural material.
Secure Effect
It is recommended to fix the arrows, then they hold longer. Before ironing the product, the inside of the fabric is sprayed with vinegar or paste or rubbed with soap. The gauze through which the fabric is ironed is also moistened in the solution.
Beginning - middle
The classic pleated pant is folded to match the seams. For even arrows, iron the knee area and rearrange the iron along the leg, starting in the middle and working down.
Long Shot Soap
In order for classic trousers to look neat and elegant, they need to be ironed, choosing the optimal parameters, but also to find out what is the best way to fix the arrows.
The part of the leg, where they will be ironed, is wiped from the inside with a bar of dry soap.
To not wrinkle
Whatever material the pants are sewn from, the ironed thing is not immediately put on, but left hanging.
No printed seams
When ironing trousers with patch pockets, a pillow, cardboard or thick paper is placed under the bottom of the fabric with grooves, which helps to avoid the appearance of indentations at the seams.
Comb as ruler
You don't need to go buy a tape measure or other tool to mark the arrows on your pants. To check the correct aim, insert the fabric of each leg between the fine teeth of the comb.
Label
Clothing manufacturers apply recommendations for the care of the fabric from which it is sewn on special labels.So that they do not take up much space, symbols are displayed on the label, thanks to which they select the washing and drying mode.
Non-standard ironing methods
Everyone's iron can break, but that's no reason to go to work or an event with wrinkled clothes, you can put it back in order using another method.
To smoke
Pleated and pleated pants without gauze hang over a bathtub filled with hot water. Heated air absorbs moisture, forms steam that rises from bottom to top, smoothes synthetics, cotton, wool and denim.
hot iron mug
To cope with wrinkles on clothes, to tidy up a skirt or dress, distant ancestors covered it with a thin cloth, poured boiling water into a metal cup and smoothed things.
press
To remove the wrinkles from the pants, they are slightly wrung out and put on the bed under the mattress and put to bed. During the night, under the weight of the body, the product dries and smooths.
How to dry well
After rinsing, the pants are turned over, connected by seams and fixed on the hangers at the bottom of the pants. When the water drains, the products are hung on the street or on the balcony, but protected from direct sunlight. Pants with arrows are not twisted, wrung out and dried in an upright position.