7 effective ways to quickly sharpen scissors at home

Continued use of scissors leads to a decrease in the initial characteristics and deterioration of the sharpness of the blades. There are several ways to sharpen scissors using various tools at hand.

Coaching

The process of preparation consists in the selection of the necessary materials or improvised means. For effective sharpening of the tool, you will need a specialized file or blade for blades.... It is recommended to use coarse-grained wood so that small oblique teeth do not form on the metal elements. This method of sharpening is convenient because the tool does not slip and can easily cut the material. You can also sharpen a tool in a power station, but it is better to work with hardware only if you have enough experience.

Basic sharpening rules

In order to avoid common errors and neatness, you need to perform a number of actions correctly. During the procedure, the following points should be taken into account:

• when sharpening, it is recommended to make a movement towards yourself, from the tip to the rings;
• you cannot deviate from the production sharpening angle, which varies between 60 and 75 degrees.

Methods available at home

In a home environment, you can effectively sharpen the tool using the available tools. It is worth familiarizing yourself with all possible options and choosing the right one.

grinding wheel

For sharpening, you need to use a whetstone with a fine-grained surface. Other varieties will not bring the desired result and will ruin the scissors. Having prepared the stone, you must successively perform the following steps:

1. Find out the angle at which the device was originally sharpened.
2. Place the point at the angle shown on the stone so that it lies flat on it.
3. With a gentle motion across the stone, pull from the tip of the point to the rings along the work surface. In this way, the two cutting edges must be processed alternately.

Look at Also

Better to glue plaster figures, do-it-yourself restoration tools and rulers

The procedure takes about an hour. When sharpening, it is important to monitor so that the slope does not change. Any burrs that occur will need to be removed to eliminate the risk of an uneven edge.

Foil

A sheet of aluminum foil can be used regularly to maintain sharpness or completely sharpened. To do this, the material is folded in several layers to form a dense web. The material is cut, then the debris is removed from the blades with a towel. For permanent use, simply make several thin strips of aluminum foil.

Sandpaper

Using sandpaper is the most common and affordable way. This option is recommended in situations where the blades are slightly dull. You will need to take a material with an abrasiveness index of 150-200 and cut the paper with scissors, making about 20 cutting movements.Then it remains to clean the blades.

To file

You can sharpen the scissors with a file by holding the blades along the work surface. It will take about 20-30 minutes to complete the procedure. After the end of sharpening, it is necessary to wipe the blades to remove the chips formed.

Special sharpener

With a specially equipped sharpener, you can sharpen the tool quickly and efficiently.

To sharpen the blades, it is necessary to lay the tool on the surface with a blunt edge and make smooth movements along the blade with the notch provided in the device.

gypsy needle

You can sharpen the scissors with a gypsy needle, placing it between the blades as close to the screw as possible. Then the blades are pressed to the needle, trying to push it up. This effect contributes to accelerated and uniform sharpening. It is important to take into account that this method helps no more than 3-4 times, after which you need to sharpen the device in the workshop.

Jar

The thick clear glass jar is also suitable for use as a scissor sharpener. The blades of the scissors are opened so that the box can fit between them, and then they perform cutting actions. Within minutes, the glass will help return to its original sharpness. To carry out the procedure, it is better to use an unnecessary jar, since scratches and chips will remain on its surface.

Look at Also

How to maintain a parquet board at home and the best remedies

We sharpen different types of houses

In domestic conditions, it is possible to sharpen not only simple scissors. Using various methods, it is permissible to work with a professional tool.

Gardening

Garden shears are designed in the same way as simple ones. Any of the described methods is suitable for sharpening.

Hair salon

Hairdressing scissors are best sharpened on professional equipment. The quality of the haircut largely depends on the sharpness of the blades.

strawberry

It is almost impossible to restore the edge of the countersunk scissors yourself. It is best to go to a workshop to sharpen the blades.

cuticle nippers

Miniature pliers can be easily sharpened with foil, sandpaper or a file. In this case, it is important to observe special care so as not to damage the fragile elements.

Manicure

Manicure tools are sharpened according to the standard scheme. The peculiarity lies in the need to remove play, which is often present even with a new instrument. Otherwise, the cutting parts will not converge properly.

Tailor

Scissors used by tailors are best sharpened on specialized equipment. Performing the procedure at home, it is important to be careful.

For metal

Metal scissors are easily sharpened with a needle and sandpaper. A more effective way is to use a vice and abrasives.

How often to sharpen

The need for sharpening depends on the frequency of use of the tool and the quality of manufacture. In most cases, sharpening the blades every 3-4 months is sufficient.