Is it possible to iron jeans and how to do it correctly at home
Jeans are among the most sought-after garments. These products are worn by middle-aged and young people of all genders. However, these items get dirty quickly and become unsightly after washing. Therefore, in order for your clothes to look neat after cleaning, you need to know how to iron your jeans yourself. This procedure does not cause serious difficulties. Problems arise mainly when you have to iron torn models.
Should I iron my jeans?
The answer to this question depends on personal preference. Some people put on jeans right away, refusing to iron. In this case, the clothes appear wrinkled. However, a number of manufacturers produce denim products that do not require ironing. The corresponding information is indicated on the label sewn from the inside of the pants. If you follow the rules for washing (in particular setting the desired temperature) and drying, then you will not have to iron the product.
Stretch jeans (tight and other models) are heat resistant.These clothes should not be ironed, otherwise the product will increase by one size.
Ironing can be avoided if denim pants stretch well. In this case, the clothes are smoothed on the legs in a few minutes.
How to wash and dry so you don't have to iron?
To reduce the number of ironing sessions, it is recommended:
- wash by hand in water heated to 40 degrees, with laundry soap;
- turn the trousers inside out and close the zippers, closures and buttons before washing them;
- avoid folding and crease the jeans during washing;
- when tightening, do not twist the pants (it is better to hang over the pelvis until the water drains);
- dry in the street, hanging the pants upside down.
Before machine washing, you should take things out of your pockets and place your jeans in a separate bag. As in the recommendation above, you must return the product with the zippers and zippers.
The machine should be turned on for quick washing, setting the temperature to 40 degrees.
In order to avoid negative consequences when using household appliances, a number of additional recommendations should be followed:
- wash jeans separately from other clothes;
- set the spin to a speed of 400 to 600 rpm;
- use bleach-free powder.
For drying, it is recommended to hang jeans pants where the sun's rays do not penetrate. Due to the latter, the material will fade. It is recommended to stretch denim pants before drying, as the product shrinks in the wash.
By observing the above recommendations, you can refuse to iron. In this case, the jeans will not be perfectly flat.
Ironing rules
To smooth denim, there are a few rules to follow:
- In order for the material to smooth out well, you do not need to wait for it to dry completely after washing. This approach will provide optimal results. If the jeans are completely dry, it is recommended to spray the pants with water from a spray bottle before ironing.
- The dark material is smoothed from the inside out. Otherwise, slight creases will appear on the surface of the jeans over time.
- The temperature at which it is allowed to iron the fabric is indicated on the label. Usually this figure ranges from 150 to 200 degrees. If the tag has been removed, you can use the following rule: the denser the fabric, the higher the temperature.
- Ironing should start from the seams and pockets, gradually moving to the trouser legs.
- Before starting the procedure, the legs should be smoothed with the hands and slightly pulled.
- Arrows should be avoided during ironing. This "decor" is suitable only for strict trousers, which do not include jeans.
The procedure itself is performed according to the following algorithm:
- Denim clothes are returned.
- The iron is set to the temperature recommended by the garment manufacturer.
- The front and back of the pants are ironed at the pockets. It is recommended to pre-lay a cotton cloth on the indicated area, which will prevent the appearance of white impressions.
- The side and inside seams are smoothed.
- The legs and the belt are smoothed.
After ironing, the jeans should be left for a few minutes until the fabric is dry. If this is not done and the product is immediately applied, "bubbles" will appear on the knees. This “defect” will also have to be smoothed out.
Features of working with torn models
Ripped jeans are very popular.However, such products cause problems when ironing. Basically, holes in jeans are made around the knees and thighs. In this case, the location of such “defects” does not play an important role in the smoothing.
It is not recommended to machine wash your ripped jeans. Household appliances contribute to the divergence of holes, which reduces the service life of products. Since ripped jeans cannot be machine washed, the pants should be smoothed out after cleaning, as visible creases remain on the legs after manual processing.
To level the product, it is recommended to carefully pass the iron through the places where there are holes. During the procedure, the legs should be covered with moistened gauze.
Denim should be ironed on a flat surface. Otherwise, hole marks will appear on the back of the legs. The fibers on the "defects" should not be ironed. For leveling, the wires are first sprayed with water, then straightened by hand.
What if there are rhinestones on the item?
If the denim is decorated with rhinestones, images (including decals), beads or sequins, ironing these products is not recommended. When exposed to temperature, these elements deteriorate or fall off. After washing, smooth jeans with rhinestones with your hands and hang them on a rope or lay them on a flat surface.
If necessary, jeans with decorative elements are smoothed with a steam generator.
Rules of care
To prevent jeans from creasing quickly, it is recommended to wear clothes after they have completely cooled. Heated fabric (including dense materials) quickly wrinkles on the body.
It is also not recommended to wear the garment when it is still wet. In this case, the jeans stretch around the knees and do not return to their previous shape.
How to iron without iron?
Jeans are smoothed faster with an iron. However, this alignment method is not suitable for all models. In addition, the iron is not always at hand. And in such cases, other methods of straightening denim will help.
heated object
Denim creases are evened out at high temperatures. Therefore, to level these products, you can use an object heated to the required level with a hard and even surface. For these purposes, pots, ladles, metal cups or pots with hot water are used. The specified items must be clean.
To smoke
This option is suitable for cases when you have free time. To straighten jeans, suspend the product over a basin or other container with boiling water. Steam and gravity will straighten the material in minutes. Repeat this procedure if necessary. As in the cases above, you must wait until it is completely dry before putting on your denim clothes.
Humidity
Wet material, due to its dense structure, is able to take on and retain given shapes. Therefore, if there is no iron at hand, jeans should be doused with clean water from a spray bottle and pulled along a horizontal surface. After that, the clothes should dry.
press
This method of alignment takes at least eight hours. To straighten the legs, the jeans should be placed under heavy objects (pots of water, books, etc.) for a specific period of time.
Hair clip
This option is suitable for cases when you need to smooth out minor flaws on some parts of the jeans. To flatten the material, the hair clip must be heated to the temperature indicated on the label and passed over the dented areas.
summer way
This option is used on narrow models. In summer, you have to put on wet jeans and go outside. The material dries out under the influence of high temperature. And thanks to the slim fit in the legs, the pants will straighten up.
liquid iron
This method is used in extreme cases, since after processing the denim acquires an unpleasant smell. To level the material, mix water, fabric softener and 9% vinegar in equal proportions. With this solution, it is necessary to sprinkle both legs with a spray bottle along the entire length and let the clothes dry.
Arms
If you don't need to achieve perfect softness, you can align the denim by applying several pressures to the surface of the legs with wet hands.
Tips & Tricks
Dry cleaning your jeans is not recommended. Under such influence, the material quickly wears out. This recommendation is especially relevant for ripped models.
The general rules for using jeans are indicated by the manufacturer on the label. The only thing to remember is that you cannot often wash these products in typewriters. Moreover, when it comes to torn models or decorated pants.