Instructions for properly gluing the door with self-adhesive film

Interior doors are decorated by gluing with special materials. Duct tape is a popular option. When a question arises, how to properly glue the door with a self-adhesive film, you need to understand the characteristics of the material and the methods of installation.

Advantages and disadvantages

The film material for gluing door structures has a number of positive characteristics. The main advantages are:

1. High resistance. The material is able to withstand external negative effects without being covered with scratches and other defects. In addition, there is no exhaustion under ultraviolet radiation.
2. Decorative properties. The film visually hides the flaws of the canvas and transforms its appearance. As an option, you can choose a film of any color, depending on your preferences and interior style.
3. Ease of use. You can glue the material on the door yourself, without involving specialists. With more care of the film, it is enough to wipe its surface with a soft damp cloth.
4. Affordable price. Thanks to the simple production technology, manufacturers offer a wide range of products at low prices.
5. Moisture resistant.The film can be used to cover kitchen and bathroom doors, since it does not lose its performance in the event of splashes and high indoor humidity.

Once you think about using a film, it is also worth discovering the negatives. The main drawback is the need for preliminary preparation of the door structure, since a violation of the technological process will cause delamination of the material. In addition, the cover is for single use and re-gluing is not possible.

Preparation for gluing

Before directly gluing the material, you need to perform preparatory steps. Competent preparation helps to avoid common installation errors and contributes to a long service life of the material.

Look at Also

When the doors are installed during the repair, preparation of work and step-by-step instructions

Tools

To glue a door structure, a set of tools is needed, which is better to prepare in advance. As part of the work, you will need:

• fine-grained emery paper, rubber trowel, brush, primer, degreaser and putty for cleaning the surface;
• tape measure, building wedge, mark and scissors to mark and shape the product if the film is larger than the door structure;
• rubber plate for leveling the surface after applying the film to the door;
• hair dryer to decorate the corners by supplying hot air.

How to prepare the surface

Armed with the necessary materials, they proceed to prepare the door for gluing the material. To facilitate the installation work, it is recommended to remove the curtain from the hinged hinges and disassemble all accessories - handles, hinges, lock. If there are glass inserts on the canvas, it is better to remove them first of the structure.

The surface of the door should be smooth, since the presence of defects and irregularities will lead to further delamination or deterioration of the visual effect. There are several ways to ensure smoothness if the old support is covered with paint:

1. Using a grinder. When using the equipment in the air, a large amount of dust is generated, so it is recommended to cover all surrounding objects before use.
2. The use of special solvents that neutralize the imperfections of the canvas. In order not to harm your health, you should use personal protective equipment.
3. Treat the door with a construction hair dryer then remove the paint with a spatula. This method saves time and removes the paint layer from the door without harm to health.

If there is varnish on the door, you can remove the irregularities with fine-grained sandpaper. When it is necessary to remove the old film, the surface should be moistened with warm water, and the material should be picked up from the edge. After leveling the base, degreasing is carried out using a soapy solution or specialized means.

In the presence of cracks and chips, the irregularities are sealed with putty, rubbed and primed.

Procedure

To properly apply the film to the door, you need to follow simple step-by-step steps. The instruction includes the following steps:

1. On one side of the material, a protective layer is separated, applied to the upper base of the door and begins to stick over the entire surface, smoothing with a soft cloth or rubber roller.
2. With a sharp knife, cut off the excess material, drill a hole for the lock and the handle.
3. Fittings are installed and hinged loops are made.

Look at Also

How to disassemble a single-lever mixer of various types with your own hands

Varieties

There are many types of self-adhesive coatings on the market. The material is classified into a number of categories based on different characteristics.

By material

The first criterion you need to pay attention to is the material of manufacture.

paper base

This type consists of two layers - polyvinyl chloride and a paper base. When gluing, the paper layer is removed and the vinyl film is applied to the prepared surface.

Movie

The standard version consists of a layer which is applied to the door leaf. Transparent layers are used as protection, which are removed before installation.

Color spectrum

Depending on your own preferences, you can choose a film of a suitable shade.

It is also recommended to take into account the general style of the interior so that the material looks harmonious in the design.

Velvet

Self-adhesive velvet-like film has many variations, which allows you to find an option for any interior. A distinctive feature is the soft, velvety surface.

under the stone

Finishing the material under the stone is suitable for an interior made in a strict style. There are films for any type of stone for any appearance requirement.

Marble

Marble finishes help to effectively transform the interior of any room. The texture of natural marble adds a noble shine and a warm atmosphere to the interior. You can paste the marbled film in the kitchen, bathroom, living room.

natural wood

Natural wood film is one of the most common options. The natural shades of wood look great in classic interiors.

Texture

The texture of the self-adhesive film is matte or glossy. The difference lies in the appearance and structure of the material.

Mast

A matte type coating hides surface defects better. In particular, the matte film visually eliminates installation errors - debris and minor air bubbles.

Bright

The glossy version looks more impressive, but hides flaws on the door leaf less well. When installing a glossy coating, the door must be carefully processed so that the material lies flat on the base.

Look at Also

How to disassemble the lid of a Redmond multicooker with your own hands, types of defects and repairs

Other

When choosing, you should also consider less common options. They are suitable for use in original interiors.

Metallic

The top layer of material can be shaped like metal. This variety is suitable for both residential and office environments.

Decorative

Having decided to glue the decorative film, it is possible to transform the space, taking into account their own requirements. Any pattern can be present on the top layer of the decorative material.

Fluorescent

Fluorescent coated film is brighter. It is effective for use in dark rooms.

three-dimensional

The three-dimensional variation creates a three-dimensional effect. This is achieved through a three-dimensional pattern.

Features of the design choice

The main requirement when choosing a design is compliance with a given style. The coating should not stand out too much from the general background.

Tips & Tricks

When planning to glue the material on the door, you need to follow the instructions. This will help avoid mistakes and ensure a smooth adhesion. It is also recommended to periodically clean and wipe the surface.