What to do with a squeaky wooden bed, causes and methods to eliminate the noise

A squeaky bed with an unpleasant noise can hopelessly ruin the sleep of everyone in the household. Even expensive wooden models age over time, the joints snugly fit, the mattress begins to weaken, the slightest movement of the lying person causes a creak. In most cases, a simple renovation will bring the peace of the night home. Think about what to do if a wooden bed squeaks, how to find and fix the cause of annoying noise.

Causes

The first step to eliminating the squeak is to identify the cause of the squeak. The bed consists of several parts, sound can appear in any of them.

Loose or broken fasteners

Fasteners connect the wooden parts of the structure. Over time, the fastener weakens, metal bolts, washers begin to rub against each other and against the shaft, making sounds unpleasant to the ear.

Contact of the wooden parts in the batten base

The next likely place for a squeak is the base of the structure - a wooden frame with slats laid out on it. The tree dries out, the joints loosen, gaps appear between the inserts, the glue crumbles. Suddenly, the frame becomes mobile, the parts rub against each other with an ugly creak.

Mattress springs

In mattresses, the most common cause of squeaking is springs that wear out, bend and give way. If the bed is old, then all parts are deformed, squeaks may occur due to friction and improper position of the mattress on the frame.

Stands unevenly

The legs of the bed bend over time and can also squeak. Fasteners are loose, load becomes uneven. The creaking occurs at the joints with the frame or on uneven ground. On a floor made up of wooden structures (parquet, slats), sometimes the slats themselves squeak.

Note: The natural aging of the product is the main cause of squeaking. Bad materials and poor build quality can be other reasons.

Poorly dried wood, poor-quality fasteners lead to the fact that suddenly a new bed begins to creak, which is still far from old age.

How to locate the source indiscriminately

It is not necessary to completely disassemble the bed to accurately detect squeaky areas. It is best to identify problem areas together - a person with good hearing searches for a source, the assistant acts on different parts of the structure and makes a crunch.

Sequencing:

1. Remove the mattress and place it on the floor. Lie on it, walk around, sit down - this will help determine the location of creaking springs. If there is no creaking, proceed to the main part of the structure.
2. We swing the bed in all directions, listen to the sounds. You need to press the backs, corners of the frame. Determine the source of the noise by ear. We listen carefully to all the attachment points of the parts, identify chips on the wood, loose fasteners.
3. Particular attention should be paid to the places of attachment of the legs, having pumped the bed into the corners.Determine the correctness of the geometry - all the legs should be connected in the same way, the floor surface should be horizontal. The product should rest evenly on all 4 legs. It's time to check if the floor squeaks.
4. If the frame does not make familiar nocturnal sounds, the reason may lie in the slats. Press the wooden planks in turn, some of them may creak.
5. Check the lifting mechanism - some parts may squeak.
6. If no problem is identified, replace the mattress in its place and pump the structure again. A squeak can be caused by the mattress rubbing against the frame.

Look at Also

How to properly plant a thing from various materials, step-by-step instructions and recommendations

Having found where the sounds are coming from, they think before working to eliminate them.

Dismantling the bed

If the squeaking is not due to the mattress, the bed will need to be disassembled to eliminate the source of the noise.

Types of fasteners

When assembling the beds, you can find several types of fasteners, which must be removed correctly and then put back in their place.

bed screed

Brace - fittings for fixing bed parts. If the parts are simply inserted into the grooves, they are disassembled like a designer. They generally consist of 4 bands of the following type:

• tape with hooks on 4 self-tapping screws or screws;
• central strip, fastened to the corners with screws or self-tapping screws, on which a strip with hooks is hung in the holes.

To remove the fasteners, choose the appropriate types of screwdrivers, according to the caps on the surface of the product.

Screw

The ends are connected by a screw link, which unscrews with a hexagon. The screw heads are visible on the wooden parts.

Conical

Tapered couplers consist of body, screw, rod. Such a connection is untwisted with a curly screwdriver. The subsequent assembly is particularly difficult.

euro screw

This attachment is also called a confirmation. In modern furniture - the most common type of fasteners. The head has 4 or 6 faces, the dismantling tool is chosen according to the type of Euro screw.

Plug connection

Connect two pieces at an angle using round wooden spikes that simply slide into the grooves. You can disconnect it by inserting a narrow screwdriver between the parts.

How to disassemble

Disassembly begins with removing parts that are not bolted to the frame. Then remove the lifting mechanism, the headboard. If the source of the squeak is accurately identified, then you can only unscrew the problem area, check the integrity of the screws, the size and type of mounting holes, the strength of the connection of the side walls of the frame.

Eliminates the squeak

After identifying the squeaky parts, they are stored in tools, lubricants and proceed to disposal.

simple ways

If there is no time to tinker with the disassembly and the creak does not allow you to sleep peacefully, you can use temporary measures to reduce the noise:

1. A pillow sandwiched between the headboard and the wall will help eliminate the squeaking. It will become a shock absorbing element.
2. Move the other furniture (chest of drawers, bedside table) to the bed, holding it in a vice.
3. Place a thick fabric between the slats.
4. Place the cover on the mattress, reinforcing it in the frame.
5. Align the legs, put blankets on them.

Look at Also

How to remove the air conditioner from the wall with your own hands during repairs

Such measures only reduce the strength of the squeak until the moment of a complete repair.

Mattress

Fighting a mattress squeak is tricky. If the sounds are caused by a lack of fixation in the frame, you can reinforce it by filling in the gaps with a small blanket. Weak springs squeak more often, in which case the mattress will need to be replaced. Mattresses filled with polymer emit sounds due to violation of the integrity of individual chambers. In this case, the only way out is to buy a new mattress.

A short-term improvement will provide a bend to the other side, but will not completely eliminate the squeal.

Bedhead

The creaking of the headboard is caused by cowardly tsars. To eliminate, tighten the bolts, check the reliability of the twist of the connecting elements. If the squeak does not disappear, insert the rubber pads, placing them on the glue. In the future, this will make it difficult to disassemble the bed.

Frame

The frame consists of many parts and fasteners. In winter, the air in the houses is dried by heating radiators, the tree dries up, cracks appear, the ties weaken, drag in the nests. The frame is reinforced using clamping fasteners and lubricants.

Tightening of all fasteners

To tighten the fasteners you will need screwdrivers with different tips and sizes, for the bolts you will need a wrench.

Work scheme:

• tighten loose fasteners;
• if the bolt is not fully tightened, there is a gap, insert an additional washer;
• a poor-quality butt joint is disassembled, lubricated with a special compound and twisted again.

Lubricants help eliminate small gaps, prevent rubbing of fasteners when bed rocks.

Special grease

For lubrication use special products made for furniture.

Pasty

The pastes are applied in a thin layer on the screeds. You can use graphite or silicone paste. Protects against friction and wear of fasteners.

Aerosol

WD-40 spray lubricant eliminates squeaks by coating the metal part with a thin protective layer. Used when disassembling and reassembling bindings. Also protects against dust and moisture.

Freeze

A thick gel-type grease adheres well to screeds. It does not run or freeze in bindings. A convenient option is silicone grease.

Spray

The spray is sprayed on the fasteners during assembly. Silicone grease is also available in spray form.

Paraffin candle or bar soap

In the absence of ready-made products, you can lubricate parts of the frame and fasteners with a piece of soap or paraffin (candle). Rub until an even, smooth layer forms on the surface. This lubrication must be repeated regularly because it is of short duration. Use machine oil, do not use other grease bed lubricants. They have a characteristic smell and leave greasy marks on the bed.

Additional gaskets

Ensure maximum rigidity when tightening the fasteners to the bed frame. Gaps left between wooden and metal parts cause creaking. To eliminate them, cut gaskets from rubber, polyethylene foam, tighten them when mounting at the joints.In the vertical plane, for reliability, glue is used.

Look at Also

TOP 5 ways to light a cast iron cauldron at home

Strength building

If all the fasteners are tight, but the frame wobbles, it is reinforced with additional fasteners. Furniture fasteners are used with self-tapping screws from inside the box. Structures acquire greater rigidity, parts do not hang down, when repairing or moving, the bed unrolls in the usual way.

Base

When scrubbing a wooden base, the best way to get rid of the squeak is to take all the wooden parts apart and glue the joints together. Sequence:

• completely divide the base into its components;
• degrease with an alcoholic solution;
• grease the joints with rubber glue (carpentry, PVA);
• until the glue has dried, quickly assemble the frame.

The disadvantage is that it will no longer be possible to disassemble the bed.

lifting mechanism

The lifting mechanism is handled in the same way as the fasteners. They are removed, insulating grease (WD-40) is applied to the holes and fasteners, put back in place, carefully tightening all the bolts. Joints can be made if necessary.

If the mechanism itself creaks, professional mechanic help or replacement is needed.

Features of eliminating squeaks in orthopedic beds

In orthopedic models, the entire load falls on the frame equipped with slats. Wear on these bands and supports often causes squeaking.

An audit of the condition of the side supports and the slats themselves is carried out. Tighten the fasteners by coating the parts with grease. Replace damaged brackets and slats. The edges of the squeaky strips are treated with silicone grease, the gaskets are inserted with gaps.If the strips are screwed, and not inserted into the slat supports, then they are reinforced with additional self-tapping screws.

Tip: a soft cloth or felt placed at the ends removes the creaking of the slats.

Preventive measures

The correct choice and installation of the bed will help to avoid a squeak:

1. Constant frame tilt is a common cause of creaking. The bed is placed on a perfectly horizontal surface - the floor is leveled, if necessary, pads are made under the hanging legs.
2. The wooden frame is more durable and will last longer. The cheaper the material, the more it dries, crumbles, the fasteners weaken.
3. When they choose a bed, they check it out in the store. All connections should be strong, tight in places, guide slats should not hang down.
4. The mattress is chosen with independent springs hidden in separate blocks.
5. During use, the condition of the fasteners is constantly monitored, loose fasteners are tightened, bolts are tightened.
6. If sawdust appears under the frame, wood dust - metal fasteners destroy the tree, urgent repairs are needed.
7. In order for the mattress to wear out evenly and not sag in certain places, it is periodically turned over.

You should not sit, stand, jump on the bed for a long time.

If the bed starts to squeak, do not delay in finding and eliminating the underlying causes. Usually minor repairs are needed first. If a new bed squeaks, you can try replacing it within the warranty period. If a model that has served for many years squeaks, you need to properly prepare for repair, carry out a complete disassembly and restoration in order to return to a restful sleep.