How to properly hang a TV on the wall, choose brackets and make do-it-yourself brackets
Over time, many people replace their old TVs with newer models with better display. Some install them on special pedestals, and the second hang them on the wall. Before you start fixing the purchased equipment, you need to familiarize yourself with how to hang a TV on the wall.
Media Types
There are three main types of brackets with which the TV is attached to the wall.
Fixed
Fixed brackets are considered the most common mounting hardware for modern LCD TVs. Their main advantage is compactness, due to which even the largest stand does not take up much space.
Some people think that fixed mounts are not very reliable and not suitable for installing televisions, but this is not the case. Such brackets, despite their low cost, are considered quite durable and of high quality.
Inclined
You can assemble the fixing structure for hanging the purchased equipment using inclined type fixings. The main difference between inclined and stationary structures is that with their help it will be possible to adjust the angle of inclination of the TV screen. This is very important, especially if it is at a height of 110-120 centimeters. The downsides include the fact that the tilt brackets don't help rotate the TV along the vertical axis.
Tilt-swivel
The most modern brackets are considered tilt-and-turn brackets. They are superior to conventional angled and fixed designs as they allow the TV to be positioned both horizontally and vertically. Thanks to this, a person will be able to comfortably watch TV from anywhere in the room. The disadvantages of tilt-and-turn structures include the fact that the attached equipment is located away from the wall. This is due to the great depth of the fasteners.
How to choose a seat
It is very important to choose the most appropriate place to place your television.
Find the optimal height for wall mounting
First you need to decide how high you can raise the TV. The following settings affect the determination of TV placement height:
- Screen diagonal. Most TV models have a diagonal of 40-50 inches. This technique is placed at a height of not more than one hundred centimeters above floor level.
- The height of the bed. It is taken into account if the TV is installed in the bedroom. With a bed height of 45 to 50 centimeters, the TV can be raised up to 120 centimeters.
Distance to furniture
If the bedroom is equipped with a modern TV, then it is imperative to decide how far it will be from the bed or sofa. Do not place it too close, as this can negatively affect your vision.
A distance of 3-4 diagonals from the TV screen is considered comfortable for the eyes.
How to hang
Before you mount the TV on the wall, you should familiarize yourself with how to hang it.
On stand
Installation on a stand is quite simple, but you still need to familiarize yourself with a few useful tips beforehand:
- before you start hanging the TV, you need to carefully study the wiring plan so as not to accidentally touch it;
- if the TV is too heavy, it is better to hang it with an assistant;
- when installing TV equipment, it is necessary to take into account the ventilation distance so that the TV does not overheat.
Without him
Sometimes people are unable to attach the TV to the brackets and have to without them.
In this case, you will have to build the fastening system yourself. To create it, you will need to pre-prepare two cut pieces of wood. To do this, a block of wood is cut into two equal parts using a circular saw. One of the pieces of wood is attached to the back of the TV and the other to the wall. When installing the TV, the wooden blocks are fixed with screws.
Make a fastener with your own hands
Sometimes people decide to make their own brackets with which the TV will hang on the wall.
Aluminum corners
When mounting small TVs up to 40 inches, aluminum corners can be used. Many people advise using them, as they are easy to make a homemade mount.
Before installation, special holes are made in each corner into which the fasteners will be inserted. You can use M4 screws to attach the corners to the TV. Then a few corners are installed on the wall, after which the TV is screwed to them.
With minimal effort
The easiest way to attach plasma panels is to use perforated mounting angles. At least two corners are installed on each TV mounting hole. After attaching them to the back panel, you need to install the four corners on the wall. For greater reliability, you can use not ordinary, but reinforced brackets.
Pipe
A reliable and sturdy structure can be made from metal pipes. This is done very rarely, because to create it you will need a special bender and a drill. First, steel plates are installed on the TV and on the wall, after which small iron tubes are attached to them. The pipes are connected using studs and bolts.
Maps
Before proceeding with the creation of fastening structures, you need to develop a drawing. On it, the features of the location of the fasteners, as well as their sizes, are noted in advance.
It is not worth getting to work without a previously created drawing.
Hanging on a plasterboard wall
Mounting TVs on a plasterboard wall is easy, so anyone can cope with this job.
Some argue that the fasteners must first be connected to the back of the TV, and then to the wall itself. However, this is not the case, since it is much more convenient to screw the brackets separately. Before screwing the fasteners to the walls, you need to make marks beforehand with a pencil or marker.
For soft and hollow substrates
If the TV is to be fixed on a hollow or loose base, it is better to use special chemical dowels. They are made from durable studs, anchors and caps. Some types of pegs have a mesh cylinder.
The drilled hole for the dowels must be thoroughly cleaned of debris. This can be done with a regular brush or a vacuum cleaner that can be blown.
What to do if thin walls
It is not easy to hang TVs on thin walls or partitions. In this case, do not use dowels or brackets that are too long, as they may come out the back of the wall. You can use short bolts or studs instead. In this case, a wide washer is installed under the head of the fasteners. This will make the mount more secure.
We hide the wires correctly
Having picked up an LCD TV on the wall, you need to think about how to hide the wires. The easiest way is to hide them in a plasterboard wall, because in it you can make a special niche for placing cords. On ordinary walls, the wires can be hidden in a special plastic cable conduit.
Seems to hang askew
Sometimes, after fixing the TV, it seems that it hangs askew. To check this, you need to use the building level. If the curvature is negligible, you can manually correct the TV by slightly loosening the bolts. However, with a strong tilt, you will have to completely remove the TV and hang it up.
Conclusion
People who recently bought a new TV sometimes decide to hang it on the wall. Before doing this, you should understand the characteristics of the brackets used and the recommendations that will help you properly mount the TV on the wall.