Step-by-step instructions for beginners on how to make a well with your own hands from matches

Making crafts with matches requires precision, perseverance and imagination. By making a well, a building or an abstract figure from matches, it is possible to develop fine motor skills of the hands. Models of different shapes can be made by following the step-by-step instructions, additionally using the available materials.

Which glue is best for

When making a matching model, it is recommended to use an adhesive solution, which will help to reliably connect individual small parts. The figurine made from glue will retain its appearance for a long time and will not disintegrate into matches.

AVP

PVA glue is considered universal and is used in a huge number of areas, including solving everyday household chores. PVA has a number of comparative advantages, including the following:

1. High adhesive power. The solution creates a strong connection, so that the finished products do not crumble under external influences.
2. Fast drying.The PVA glue quickly bonds the parts together and dries completely in 12 to 24 hours, depending on the ambient temperature.
3. Moisture resistant. Accidental splashes or storage of the machine in very humid places do not alter the characteristics of the glue applied.
4. Respect the environment. The solution does not emit toxic substances and is absolutely safe for use.
5. Economic consumption. A small amount of solution is spent on crafting matches.

"Moment Joiner"

Moment Stolyar Moisture Resistant Glue is suitable for all types of wood and reliably glues small parts, including matches. After application, the solution grips the parts in 15 minutes. The solution does not contain toluene, solvents and harmful components, therefore "Moment Joiner" can be used when creating crafts with children.

"Instant Instant Editing Moment"

A particularity of the glue "Moment Installation Instant Grip" is the grip after the first seconds of application. The solution is resistant to moisture, temperature extremes. When using this type of glue, it is recommended to remember the following nuances:

1. If, when connecting the sticks, an excess of solution appears through the gaps, you can remove the glue with an unnecessary plastic card or thick paper.
2. To prevent the adhesive from protruding from the adhesion surfaces through the gaps, a toothpick technique is used. Glue is applied to a match, put a thin edge of a toothpick on top and connected to another match. A toothpick will provide a small gap, and a layer of glue will remain between the matches.

Look at Also

What types of curtain rods are there and how to choose the best option

How to Build - Step by Step Instructions for Beginners

A huge number of crafts can be made from matches. Having no practical modeling experience, it is worth following the instructions. By following simple step-by-step steps, you can avoid common mistakes.

Little house

To model a house, you need to prepare matches, a toothpick, glue and a base (a piece of cardboard or plasticine).For convenience, it is recommended to select the most even matches and to pre-pour the glue into a small container.

The manufacturing instructions include the following steps:

1. As the base of the house, take 2 torches and place them parallel to each other, leaving a gap of 2 cm. In order for the foundation of the crafts to be even, you need to cut the sulfur from the first sticks .
2. The edges of the next matches are smeared with glue and laid on the base so that they form a square.
3. They continue to lay the pieces in the same way until the desired height of the house is reached. It is best to lay each new level after the previous one has dried to avoid bias.
4. The erected walls of the house are covered with a layer of glue on top, and matches are laid for the base of the ceiling. The top layer can be reapplied with an adhesive for added strength.
5. The roof is made of two identical parts, alternately gluing short and long matches. After making the two parts, they are connected to each other and put on the house.

GOOD

A model well is more difficult to make than a house. To create crafts, do the following:

1. From four sticks without a top with gray, a base is glued in the shape of a square. A row of matches is placed on top of the base, causing them to slide in the opposite direction. In total, 9-10 rows are built.
2. On the two inner faces of the well, three-part racks are glued, the central of which is located just below the lateral ones. The uprights are needed to hold the gate. The door itself is made of a toothpick, gently breaking it in two places to simulate a handle.
3. On the reverse side of the racks, two shards are attached for fixing the roof, and a wooden beam is placed on them. Oblique matches are glued to the end of each rack for subsequent fixing of the roof.
4. For the roof, matches are cut according to size between the inclined elements and placed on the prepared base.

Look at Also

14 Best Ways to Get Rid of Condensation on Pipes

Chair

A chair-shaped contraption can be made in several ways. A common option includes the following steps:

1. The work begins with the creation of frames, the heads of which are cut from the matches and glued in the form of rectangles. The frame of the backrest should be made more elongated.
2. As a decor for the backrest, any geometric figure is cut out of colored cardboard and attached to the back from the front side.
3. Shards are laid on top of the seat frame in a row so that they completely cover the hole.
4. They form a blank from the legs, because their separate gluing allows you to strengthen the structure. To do this, U-shapes are constructed from sticks and fixed under the seat.

Church

The product in the form of a church is made by analogy with a house, with some modifications. To design several towers of the church, frames of the required height are placed under each house. As a rule, the central part of the craft is left higher. At the top of the article, crosses made of halves of toothpicks are attached.

Lock

According to the general principle, a castle can be built in the same way as a house with a church. The difference between the craft can be the top of a conical or similar shape. To create them, instead of a standard roof, a piece of wood is placed in the center of the base, and other pieces are fastened around the entire area at an angle, gluing them together.

Figures

Many figures can be modeled using matches. The final result depends on the imagination shown and the efforts made. The instructions for each specific figure are different and have a number of characteristics, so it is important to read the detailed instructions before starting work.

cube

The cube serves as the basis and preparation for a large number of other crafts. A properly modeled cube should be strong and stable. Instructions for gluing the cube include the following steps:

1. Using a special stand, matches are placed one by one around the perimeter. The square perimeter is left without corners.
2. In the gaps between the perimeter elements, sticks are placed perpendicular to the lower base. Beams are laid sequentially on both sides so that a lattice is formed at the bottom.
3. The side walls are constructed by placing matches on top of each other in a horizontal position.
4. The upper part in the form of a trellis is made by placing matches in the same direction as in the bottom row. Then a layer of matches is laid on it. When you finish the job, you have to be very careful, because some final pieces will fit more tightly than the previous ones.
5. Pressing the cube on all sides, carefully remove it from the stand and align it, avoiding deformation and distortion. To give solidity to the structure, a piece of wood is glued on each side.

Look at Also

How to use fabric softener correctly and what it is used for

How to make a house without glue with your own hands

A craft in the form of a house without the use of glue is built on the basis of a standard cube. To attach a roof to the cube, shards are inserted into the corner holes, and the verticals are pulled to the middle. Then the pieces are laid perpendicular to the flooring and pieces of wood are inserted between the vertically protruding elements, creating the flooring.

Matchbox modeling

In addition to the standard set of shapes, it is possible to model more complex structures. It will take a long time to manufacture, but the result will be surprising and pleasing to the eye.

Boat

Match ships are often made in large sizes. Ready-made crafts serve as an unusual decorative decoration. You can create a ship in different ways. Among the many instructions, you need to choose the option that appeals to you the most visually. It is also possible to show imagination and add certain details to the ship.

Plane

The creation of airplane models is very popular. Small gliders and enlarged airplanes can be crafted from matches. For the decoration of many models, you will also have to use thick paper to make the design more reliable.

Wheel

Building a wheel of matches, they are placed in a circle on a support and begin to weave. To do this, other matches are placed between those inserted through one, gradually rising upwards.

Ball

The base of the ball is a 9-row well, the last of which is laid out like a floor. Another layer is placed perpendicularly on top, and matches are arranged vertically around the perimeter.To turn the figure into a ball, they are stacked in a checkerboard pattern, and the heads are depressed.

Additional tips and tricks

When you start creating a craft, it is recommended to prepare a work space and cover it with newspaper or fabric. This will provide protection against glue penetration.

When selecting matches for a product, it is best to leave copies with even edges, as they will stick together better.