18 ways to clean a narrow neck bottle at home
Every house has narrow neck bottles in the kitchen. This container is used for syrup, wine, vegetable oil and other products. Plastic or glass. Mistresses do not throw it away, because it will be useful to them in the future. For reuse only, you need to know how to clean this narrow neck bottle.
Basic methods
Each person uses common items when washing a container.
The water
To wash the bottle, it is filled with water and left to stand for 1-2 hours. The liquid will absorb any type of dirt. After that, the container is easier to clean.
Ershik
It is the standard cleaning tool for this type of tableware. It is not recommended to use brushes made of rough materials. They can scratch the surface or damage the bottle, making it impossible to reuse.
For cleaning containers of wine and other liquids, a natural fiber brush is best.
water jet
The cleaning method is suitable for people living in a private house. If there is a hose, the bottle is washed under water pressure. For the effectiveness of washing, before starting the procedure, the container is soaked in warm water.
A soda
Baking soda powder works well. Small particles do not scratch the surface of the container, while removing dirt.
The vinegar
Table vinegar will help wash the bottle. Gasoline is mixed with water and poured inside. The acid contained in the liquid not only removes dirt, but also gives the product shine.
Sand
For cleaning, sand with coarse particles is taken and mixed with dishwashing detergent. The bottle is filled with hot water to soften the plaque, after which the liquid is drained. Then sand with detergent is poured into the container. The closed bottle is shaken until the dirt is washed from the walls. At the end, rinse with water.
Not standard
There are times when common methods fail to deal with the problem. To wash the container, they resort to non-standard methods.
Newsprint or fabric
Cleaning with a newspaper is next. It breaks into small pieces, is poured into a jug, then a soda solution of increased density is added. The contents are shaken off and left for a while. After a few minutes, the shaking movements repeat. The contents of the container are poured. The container is rinsed with clear water. The fabric is used in a different way. The container is filled with clean water with the addition of marsh water. As soon as the inner contents have bloomed, a piece of tissue is pushed inside.
They begin to drain water, spreading the fabric along the walls. The person pulls on the tip of the segment and thus wipes the surface. At the end, it remains to rinse everything with water.
Nettle
The container is filled with lukewarm water and the person waits for some time for the dirt to go away. Nettle leaves are placed inside and the container is shaken. This is done in such a way that the water rotates in the container along with the sheet metal plates. Thanks to the latter, dirt is removed from the walls of the bottle.
Rice
Groats perform the role not only as a food product, but also as an excellent cleaning agent. The third part of the container is filled with hot water, after which a handful of rice is added to it. After adding 3 tbsp. the soda container is closed and shaken. After emptying the contents, the container is washed with clean water. The grains of rice scrape dirt and liquid residue from the walls. Baking soda powder removes odors and sanitizes the bottle. The method is economical, but it takes time and effort.
How to dry well
If you have a clean container in your hands, the next problem arises - how to dry it. In practice, it turns out that using a hair dryer is unsuccessful.
There are a few tricks that work with both plastic and glass containers.
Glass bottle
The method will require any type of paper, but it is desirable that it absorbs moisture perfectly. Even tea towels will work. A piece of paper is rolled up and placed inside. It is advisable that the end protrudes from the container, as it is necessary to push the paper out.
Plastic
The container is turned over and placed on the surface. It is desirable to substitute something under the neck. Air must enter inside, which will speed up drying.
Features of cleaning from sunflower oil
A viscous liquid is a lipid mixture that does not interact with water. Therefore, other methods and means are used for disposal.The selected substances can penetrate fat molecules and remove them from the surface.
Mustard
The product is used in powder form. The fluid mixture is diluted with hot water. The proportion is as follows - for 1 liter of water, 2 tablespoons are taken. I. Mustard powder. The ingredients are mixed so that there are no lumps, and the liquid is poured into the bottle up to the neck. After 2-2.5 hours, the liquid is drained and the container is rinsed with clean water. Repeated cleaning procedure will improve the effect.
Flour
A fluid mixture is used because of its ability to absorb various liquids. The bottle is completely filled with water, after which the flour is added. The result should be a white liquid. The container is turned over so that the dirty places are covered with a solution. After some time, a handful of rice is added to the container. After shaking, the bottle is emptied of its contents. After rinsing the container with water and adding detergent, rinsing is performed.
Boiling
The method helps if a lot of dirty containers have accumulated and there is not enough time for cleaning. A large pot is filled with dirty containers and filled with water to the top. A small amount of detergent is added to the water.
A saucepan with a container is placed on the stove over medium heat. Boiling should be carried out for 25-35 minutes. After turning off the stove, the contents of the pan are left to cool. The container is taken out and washed with clean water.It is advisable to take a bar of laundry soap instead of detergent.
How to clean a narrow neck thermos
The cleaning principle is the same as for a plastic or glass container.Since the thermos is used to make tea or coffee, the walls are covered with a dark coating. It will help citric acid or fresh lemon. The thermos is filled with water, where lemon juice, zest or pulp is added. The container is left overnight. In the morning, the liquid is drained and you can see that the walls of the thermos are clean. If the neck is narrow and physical effort is required to clean it, use a brush.
Ways to clean the bottle from green plaque
Over time, a green coating forms on the bottom, despite the fact that the water is clear. Especially if it is a drinking water bottle. This cannot be avoided, since the vessel is constantly wet.
Dish gel and salt mix
The detergent is made in house with sea salt. The container is filled with salt and detergent. After that, clear water is poured. The container is shaken until the walls are completely washed. The container is left to infuse for 40 minutes, and after a predetermined time it is washed under running water.
Be sure to dry the bottle, as this reduces the risk of green plaque forming again.
Use soda
A thread is sewn to the foam sponge, the length of which exceeds the height of the container. It is pushed inward, while the end of the thread remains on the surface of the collar. For convenience, the end of the wire is tied around the neck.
The container is filled with baking soda and a little water. Using a stick, the bottle is cleaned with a sponge until it is clean. The stick should also be much longer than the height of the ship. At the end of the intervention, the container is rinsed several times with clear water.
Beans
Regular dried beans will help clear plaque.Grains, about 150-250 g, are poured inside. 1 liter of water is poured into the beans. The container is closed with a lid and shaken for 8-10 minutes. It is necessary to stir the contents until the liquid takes on a dirty green hue. After that, the content is poured. At the end, the bottle is rinsed with clean water and dried.
Instead of beans, various cereals are taken. It can be the same rice or millet. But you need a lot more mixing. The amount depends on the volume of the container.
Chemical
Suitable if the bottle is not intended to store drinking water. Typically, containers are used to store water. In turn, the liquid will replenish the water level in the tank of the car wash or wash your hands in nature.
Plaque is removed with a high concentration hydrochloric acid solution. The liquid is poured directly into the container. After that, the bottle is closed and shaken for 5-10 minutes. If the container is very dirty, the composition is allowed to get wet. Once the container rinsed with clear water 2 to 3 times.
Pipe cleaning fluid
It is strictly contraindicated to drink water from a container that has been cleaned in this way. Small particles remain at the bottom that harm the body. As a result, a person cannot avoid serious poisoning.
The product is poured inside and must remain in the container for at least 25 minutes. As soon as the water shadow turns green, it is poured. After that, the container is washed under running water. The method is suitable in cases where simple methods did not give the desired result.
It is possible to clean the container, and various methods have been developed for this. The choice of method depends on the degree of contamination and the future use of the vial. Housekeeping is done independently at home.