Review of 22 Best Methods and Ways How and How to Wipe Adhesive From Tape
After using tape, you often have to decide what is the best way to wipe away any remaining glue. There are many ways, ranging from improvised means to store-bought drugs specially designed for this purpose. It remains only to choose which product will be the most convenient to use and suitable for the stained surface.
Simple methods
The easiest way is to use the tools that are likely to be on hand in every kitchen or workshop.
Sunflower oil
In addition to sunflower, you can take any vegetable (for example, olive) or essential oil. When choosing an essential oil, you should give preference to a bottle with a pleasant aroma, then, in addition to removing traces of glue, the product will also refresh the air in the room.
A little oil is poured directly onto the stain or an oil-soaked cloth is applied to the stained area. The oil should be left to act for some time, then wipe off with a cloth, the remnants are washed off with soap and water.The oil will leave greasy stains on untreated wooden surfaces, the use of which is not recommended.
Gasoline for lighters
Gasoline used to refuel lighters is preferable to regular gasoline because it has undergone additional purification. Gasoline should be used with extreme caution indoors as it is poisonous and flammable.
Gum
With a regular school eraser, you can wipe off leftover tape from almost any surface, including plastic and furniture. The method is laborious, because you have to rub hard and long. Then wipe with a damp cloth.
hair dryer
When heated, the adhesive residues soften and it becomes easier to remove them mechanically. You can apply a hair dryer not to all surfaces, but only to those that are not afraid of high temperatures. Often the use of a hair dryer is combined with other means: first, the glue is softened by heating the surface, then the stain is removed, for example, with gasoline.
Cloth soaked in warm water
Sometimes removing the adhesive from the tape is as simple as rinsing the contaminated area with a damp cloth. The hot water will soften the glue marks and the cloth will remove the residue.
New tape
The easiest way is to remove the remnants of the old tape with a new one. To do this, stick adhesive tape on the traces of glue, then tear it off strongly.The method will be useful when the use of solvents or abrasives can damage the surface, for example on furniture.
soda solution
Glass, plastic, tiles are often cleaned with soda. A thick paste is prepared from soda with a small amount of water, put on the dirt, then washed off with light movements. Care must be taken not to scratch the base material.
Chemical methods
If simple methods did not help, or they are not suitable for any parameters, or they were not available, you can try to remove traces of adhesive tape by chemical methods.
Acetone
It is best to use pure acetone, but nail polish remover containing acetone can also be substituted. Apply to traces of tape for a few minutes, then wash off with a towel. In addition to sticky residue, acetone will also remove clinging bits from the tape itself.
Window cleaner
Window cleaning fluid is sprayed on the dirt for 10 minutes, as exposure will take some time; then wash with a soft cloth. The tool is used for glass, tiles and ceramic tiles, and also cleans body parts without damaging the paint.
The vinegar
As a rule, any housewife has a supply of vinegar. Enough nine percent vinegar essence, which is applied for 1 hour and washed off with water. Cope with traces of adhesive tape on the surfaces of household appliances, plastic windows.
white spirit
The solvent is quite aggressive and should be used with caution and only in well-ventilated areas. It is advisable to use protective equipment for the skin and the respiratory tract.
After application, wash with soapy water and wipe dry.
Special means
If the available means do not cope with the task, they switch to special means. You can buy them in advance, for example before moving or buying furniture, when the prospect of cleaning a large number of surfaces from scotch tape looms.
"Anti Scotch"
Antiskotch, available on the shelves in the form of sprays and liquids, has many advantages. The tool can remove tape adhesive and sticker traces from almost any surface: it is used to clean ceramic, plastic, glass, metal. Delivered in a practical packaging. When spraying on a vertical area, the aerosol does not drip.
Spray Mellerud
Mellerud is a German manufacturer of quality household chemicals. Glue trace remover from this manufacturer will help clean the remnants of glue and stickers on fabric, wood, marble, PVC, glass. Not suitable for very sensitive surfaces such as acrylic. To remove the glue, saturate the fabric with the product and treat the stain. Leave to act for a few moments, then gradually wipe off the traces of glue with light movements.
It should be applied with care due to its flammability and corrosive effects on the skin.
Scotch Weld Cleaner
Effectively removes tape residue. Before spraying, shake the can for 10 seconds, then carefully cover the stain with the product. After a few minutes, rinse with a clean cloth.
Kiehl table adjustment
Cleaner from a professional detergent manufacturer from Germany. To clean the contaminated area, it is applied not to the surface itself, but to a napkin with which the stain is wiped.
Do not use on painted or plastic surfaces which are not solvent resistant.
"Taygetos S-405"
The stain remover is effective on most hard surfaces, carpets and upholstery. Soak in contaminated area for 30 seconds to 3 minutes, then wash. The product is flammable and toxic, with long term use a respirator is recommended.
"Cosmophene"
Used to clean plastic window frames. The main advantage of the Cosmofen 20 cleaner is that it has no dissolving properties, so its effect on the surface to be cleaned is mild. "Cosmofen" with an index of 10 is less gentle, it is used for the radical removal of pollution. Resists glue residue from masking tape.
Cleaning pencils
Cleaning sticks specially designed for this task can help remove adhesive tape or stickers from glass, plastic or ceramics. They are often used to remove traces of glue from household appliances.
How to wash glass from scotch
Glass is not afraid of aggressive solvents such as alcohol or acetone, as well as products containing them in the composition. It is undesirable to use abrasives to avoid scratches. What products will help keep the glass clean?
"Mister Muscle" windshield wiper
Various wipers such as "Mister Muscle" will help remove traces of tape and stickers from plastic windows. The liquid will remove the dirt without leaving traces. A spray is sprayed on the stain, left for a moment, then washed off with a sponge.
Ammonia
A little ammonia is applied to a towel or cotton swab and applied to the contaminated area for 5-10 minutes, after which it is wiped off with a clean cloth or towel. Ammonia solution from the first aid kit and cleaning agents containing ammonia in the composition will help to easily peel off the remnants of glue from the glass.
"Palmira" cleaning paste
The detergent is produced for soaking, washing fabrics and for washing walls, floors, tiles, enameled surfaces.
Although the paste is not intended for cleaning glass products, its abrasive action will help remove traces of glue from the panes.
"Bingo"
The cleaning powder is used for wet cleaning in the kitchen. Thanks to fine abrasive particles, it wipes various types of dirt well and will withstand traces of adhesive tape on the glass. Fragrances in the composition of the product will give a pleasant aroma.
The process of removing traces of double-sided tape
The general principle of removing traces from different types of adhesive tape is the same. First, a cleaning agent is applied to the stain, leave it for a while to soften the glue, then remove the residue with a clean towel or light-colored cloth, then rinse with soapy water. The exposure time of the cleaner depends on the type of cleaner and the degree of soiling. If the product is aggressive, you must first check on an inconspicuous area so as not to damage the surface. To speed up the process of softening traces of glue, they can be heated with a hair dryer, if possible and if the quality of the base material allows.
What you should not do
When cleaning adhesive from tape, it is not recommended to do the following:
- Do not try to peel off the adhesive with sharp objects, as this may scratch the surface. It is best to soften in any way available, then carefully remove.
- Do not use flammable substances such as gasoline near open flames.
- Do not use toxic substances in unventilated areas.
- It is not recommended to ignore personal protective equipment for the skin and respiratory tract when using toxic solvents.
- It is not necessary to use alcohol and acetone, as well as products based on them, for products coated with paint or varnish.
- Do not use vegetable or essential oils on untreated wood.
- Do not heat the dirty area with a hair dryer as this may damage the surface itself.
- It is better not to delay the removal of traces of glue from adhesive tape, old ones are much more difficult to clean.
Useful tips
To get rid of sticky tape marks, it is best to use the cleaning methods in the following order:
- First, they try to peel off traces of the old tape with new tape, after heating the surface. If necessary, the procedure is repeated several times.
- If the tape method doesn't help, use soapy water or vegetable oil.
- Then they try other solvents, starting with milder ones.
In order not to wonder how to remove traces from the tape, you can purchase special adhesive tapes in advance that do not leave traces when peeled off.
Adhesive tape is an excellent assistant in everyday life and in construction work.And knowing simple ways to get rid of traces of scotch tape on different materials, you can easily eliminate the consequences of repairs or displacements without damaging the product.