20 mechanical, chemical and folk ways to rub superglue
Superglue is an indispensable helper, but finding something to use to wipe it off when it gets on your hands, clothes, furniture can really be a hassle. If you know effective and safe solvents that will qualitatively clean different materials from glue, you can significantly save energy and nerves, and sometimes even save a seemingly irreparably damaged thing.
Why is it hard to wipe the glue moment
Any high-speed cyanoacrylate glue is generally referred to as superglue.For instant tuning, different manufacturers call the product "Super Moment", "Secunda", and the strength of the connection determines such names as "Monolith", "Strength", "Glue". In fact, the principle of action and the main characteristics are one and the same glue.
It is difficult to wipe off this kind of glue, because the cyanoacrylate on which it is based penetrates into all the microcracks of the surfaces to be glued and sets instantly. This is due to atmospheric exposure, that is, in contact with air, the glue hardens almost instantly.
Disposal chemicals
To remove dried superglue residues, solvents are used based on various substances, the most famous of which is acetone. It's handy to have one of these tools on the shelf, so that if you unexpectedly need to use the "Super Moment" you don't have to rush to the store for a solvent to clean up your fingers.
"Antikly"
A tool that particularly careful people buy together with the Seconds tube. Specially designed to gently, quickly and effortlessly remove adhesive residue or excess from virtually any surface. Using "Antikley" you can easily and simply peel off the fingers stuck together from the "Moment". To do this, it is enough to apply the gel to the bonding site and wait a few minutes, then gradually disconnect the hands. This is done slowly, allowing the composition to act on the entire area. If you shake sharply, you can hurt your skin.
"Dimexide"
The drug is sold in pharmacies as an anti-inflammatory, local analgesic, antiseptic. Thanks to the dimethyl sulfoxide (DMSO) contained in the composition, which dissolves cyanoacrylate perfectly, it does an excellent job of removing superglue.
Acetone
Acetone and acetone-based solvents are best suited for removing instant glue, but not all surfaces can be used. If superglue gets on a varnished or painted object, before wiping it off with acetone, you should try on an inconspicuous area so as not to damage the entire surface. If the material is resistant to the solvent, the moistened cotton is left to act for some time, then rubbed with effort.
white spirit
A solvent widely used in everyday life will withstand dried superglue. White spirit should be used with care on plastic, leather, painted surfaces, it is advisable to test its effect where it will not be noticeable before cleaning the area in a conspicuous place. The principle of application is the same as for other solvents - a cotton swab or a cloth soaked in white spirit, gently but carefully wipe off the dirt.
It is important to remember that the product is aggressive and remember to wear protective gloves and ventilate the area well.
Alcohol
Ethanol does not dissolve cyanoacrylate as effectively as acetone or DMSO. It is used when there is nothing else at hand or when other solvents can damage the surface. To remove the superglue, the stain is actively wiped with a product applied to a cotton ball or cloth. There is no point in soaking because the ethanol evaporates quickly.
Remover
Acetone-based nail polish remover can be used to remove traces of super glue. The remedy is often at hand at the right time, since most women can find it on a shelf or in a cosmetic bag. Acts like pure acetone. The solvent should also be used with care, after ensuring that it is safe for the surface to be cleaned.
folk ways
When chemicals are out of reach or unacceptable for any reason, traditional methods will come to the rescue.
Butter
It is convenient to use the oil to remove the "Super Moment" from the skin. The method is very gentle, does not cause harm, but, on the contrary, provides additional care. For this method, you can take butter or any vegetable oil. The contaminated area is treated with a fatty agent until the glue begins to peel off. Most likely, the procedure will have to be repeated several times.
The oil can also be applied against glue stains on varnished surfaces, plastics, silicones - materials that will not withstand solvents. It won't dissolve any glue residue, but will help loosen the stain. Not recommended for untreated wood because it is very difficult to remove traces on the wood.
table vinegar
Vinegar is often used to remove superglue from natural fabrics. The injured garment is soaked for 10-15 minutes in a solution of water and vinegar (1 glass of vinegar per 1 liter of warm water), after which the glue is scraped off and dried residues are removed with tweezers . The method is not used for synthetic fabrics.
soda or salt
Salt is often used to remove superglue residue from the skin of your hands. To do this, moisten the skin with water, sprinkle the stain with salt and actively rub it for several minutes, after which it is washed off with warm water. If necessary, repeat several times. With this technique, the salt acts as a scrub.
Baking soda will help remove superglue that has dried on linoleum, laminate, and other materials.A thick paste prepared in advance from soda and water is applied to the glue stain, and after a few hours it is removed with a napkin.
hair dryer
The contaminated area is heated with hot air, softening the glue for its subsequent removal mechanically. The method is ineffective against cyanoacrylate, which is not afraid of a slight increase in temperature, so it is rarely used.
Hydrogen peroxide
The product will help remove dried glue residue from the skin of the hands, as well as from metal surfaces. Rub the soiled area with a peroxide-soaked cotton ball or cloth until the stain is completely gone.
Hot water
Most often, warm or hot soapy water is used to clean superglue from hands and clothing. You can take a bar of soap or liquid soap, for the skin it will not hurt to supplement the method with a scrub. If the glue froze on the clothes, the fabric is as soon as possible put in boiling water, drop it (for this it is more convenient and faster to boil an electric kettle), leave for 5 minutes , then scrape it off with a blunt object or remove it with tweezers. If the material is afraid of boiling water, the affected garment is hand washed in warm soapy water.
lemon acid
A solution of citric acid will help cope with not very old stains on the fabric. To prepare it, you will need 1 tablespoon of powder and a glass of water. The glue stain is moistened with a solution and left for half an hour or an hour, after which it is manually washed off with warm water and soap.
Citric acid or natural lemon juice works similarly to acetone, but less effective, although milder.This property is used when gentle cleansing is required, for example for the skin of the hands.
Fat, margarine, petroleum jelly, olive oil
Any oily product is suitable for peeling off the dried "Super Moment" from the skin of the hands, especially for delicate baby skin. Grease is abundantly applied to the dirt, rubbed into it, trying to pick it up by the edge and remove the peeled glue. After washing hands with warm water and soap.
High or low temperature
Some types of super glue cannot withstand high temperatures. In this case, it is convenient to remove their traces from the fabric with an iron. On both sides, the contaminated area is sandwiched with a thick layer of towels or light cotton cloth and ironed, while the glue is heated and absorbed into the towels. The freezer will help you get rid of unstable glue at low temperatures. The soiled garment is placed in the freezer for several hours, once the glue residue has become brittle, it is removed with tweezers.
Mechanical
When choosing a mechanical method, it should be borne in mind that in this way it is very easy to scratch the surface to be cleaned. And if "Super Moment" can be removed from the fingers by simply rubbing the stain with a scrub, without causing particular damage to the skin, then abrasives or scratching will cause irreparable damage to glass or plastic. Other types of glue, for example PVA, pick up the edge of the dried stain and tear it off the surface, but it is better to use a solvent or detergent to remove the superglue.
Alcohol and ammonia
Ammonia or ammonia is good because it does not corrode the surface being cleaned. The tool is used to remove superglue from glass, plastic, furniture, laminate, clothing.It is applied to dirt and wiped off as it softens.
Safe ways for children
If superglue comes into contact with the child's skin, it is necessary to remove the stains in the safest way. Therefore, when choosing products, preference should be given to natural products. Mechanical methods or strong solvents will not work. First, you should try washing off the glue with warm soapy water. If that doesn't work, use more effective means.
A soda
The skin should be moistened and rubbed with baking soda, then rinsed with water. The procedure is repeated several times until the point of glue comes off.
Sunflower oil
In addition to sunflower oil, any vegetable oil, for example, linseed oil, is suitable. You can also use cosmetic oil. The product is applied to the stain, rubbed in thoroughly for several minutes, then washed off with water.
Diluted vinegar
Soaped hands are soaked in a weak vinegar solution for 5 minutes, after which it is advisable to rub the stain with a scrub and wash off with warm water.
alcohol wipes
You can try removing superglue marks with alcohol wipes. The alcohol with which the napkins are soaked will not be able to fully dissolve the glue, but will soften the top layer, which is wiped off with the same napkin. This is how the entire stain is gradually removed.
Features of cleaning various surfaces and materials
When working with superglue, streaks or excesses can appear on a wide variety of objects. To give different surfaces a neat look, each will require a different method to clean it without damaging it.
Furniture
Furniture often suffers from dirt, especially glue. When working at the table, its surface must be protected from the penetration of glue, but this precaution is usually ignored, and then it is necessary to look for a way to remove traces of glue.
Plastic
In order to remove superglue remnants from plastic furniture, the tool must be chosen especially carefully. Solvents can warp the surface and abrasives leave scratches. The safest way for the material is to soften the dried glue with water. To do this, cover the stain with a generously dampened cloth and leave for several hours. To prevent the liquid from evaporating, they are covered with polyethylene on top, and its edges are glued with adhesive tape. After 3 hours, wipe the stain with a clean cloth.
If the glue has not come off, the procedure is repeated. The method is time consuming, but the plastic will do no harm.
Cleaning with alcohol will also not harm the material. The stain is moistened with a cotton swab dipped in alcohol, and after softening the glue, wipe off the remnants with a clean cloth and wipe with a damp sponge.
Varnished
To clean the lacquered table from traces of superglue, ordinary water and soap will help. Additionally, vegetable oil can be used to remove glue stains. Solvents and abrasives should not be used on the varnished surface.
chipboard
To clean chipboard furniture, use nail polish remover. A cotton swab moistened with a cotton swab soaks the dirt, leaves it for a while, then wipes it off with a cloth. Clean the stain in the same way with diluted vinegar.
Soft, tender
If glue gets on the upholstery, remove it immediately.Until "Supermoment" is dry, remove the excess with a scraper, moving from the edges of the stain to the center, so as not to enlarge the affected area, after which it is necessary to use a cleaner. To remove glue stains from upholstered furniture, Antikley has proven itself.
Leather
To get rid of traces of superglue, it is better to use a specialized solvent - "Anti-glue". However, keep in mind that it can remove some of the dye, so you should test it on an inconspicuous area first.
Stage
It's not uncommon for superglue to hit the ground when a tube is dropped or glue is accidentally spilled. Cleaners like nail polish remover, Dimexide, white spirit will help remove streaks. When removing a glue stain, you should pay attention to the material of the floor covering, this will determine the choice of product.
Linoleum
Most solvents are suitable for linoleum. If in doubt about their effect on the design, first check an inconspicuous area.
parquet
"Antikley" will help remove superglue stains from parquet. If you don't have it on hand, you can use nail polish remover. "Dimexid" has also proven to be effective in combating traces of second-hand glue on parquet.
Laminate
You can clean the laminate without damaging it with Dimexidum. The stain is wiped with a cotton pad soaked in the preparation until it has completely disappeared. Then wipe with a dry cloth.
Glass and office equipment
Many products work to remove superglue from glass because this material is solvent-free.Choose the handy or most effective cleaner available. To clean the glass of traces of used glue, a solvent such as window cleaner, alcohol or nail polish remover is applied to the stain for a while, and the residue is cleaned. clean with any glass cleaner.
Dimexid will deal well with superglue stains on a tablet or smartphone. It can also be used on a laptop and gently cleans both the screen and the lid.
Silicone or plastic case
In order not to damage the material, the use of solvents is undesirable. If you have superglue on the cover, you should try wiping it off with vegetable oil. The oil applied to the cotton is wiped off dirt, if the cover is made of silicone, then it is at the same time bent in different directions so that the glue comes off better. After removing the glue, the cover is washed in soapy water, then in clean water.
Front door
If superglue gets on the front door, a cleaning method is selected to remove it, taking into account the material from which it is made. It is convenient to use universal "Anti-glue", it is suitable for most surfaces. The solvent for oil paints "Penin" has also proven its effectiveness.
Metal
For metal, such solvents as acetone, white spirit, "Dimexid", "Antikley" are used. Sharp tools and abrasives are not used so as not to scratch the surface.
Sweden
The stained area is treated with hot steam, heating and softening the stain. To do this, you can hold the product over a boiling kettle. Then gently clean with a brush.Of the solvents, ammonia and nail polish remover are suitable, but they should be used with caution, first applying to an inconspicuous area. After removing traces of glue, paint and impregnation are applied to the suede.
Marble
The surface is heated with hot water and the stain is soaked in alcohol or acetone. When the superglue has softened, it is scraped off with a plastic scraper, taking care not to scratch the material. Suitable for marble and Anticlea surfaces, if this type of material is indicated on the application instructions.
Tile
In order to remove superglue from a tile, Anticlea will do a good job. If the product is not at hand, you can try to achieve the desired result with acetone, alcohol or another solvent. The mechanical method must be used with great care so as not to damage the surface.
Keyhole
The keyhole is first cleaned mechanically, removing as much glue as possible with a thin, pointed object. Then the lock larva is poured with "Antikley" with a syringe for half an hour, after which it is again cleaned. The procedure is repeated until a positive result is obtained.
Textile
Many products are suitable for fabric, their choice depends on whether the material is thick or thin, artificial or natural. For synthetic textiles, especially fine textiles, strong solvents are not recommended, they can deform the product. You can take advantage of the fact that some types of superglue are sensitive to high and low temperatures and resort to an iron or freezer. For many things hand washing with soap and detergent will suffice, vinegar, acetone, club soda and other products can also be helpful.
human skin
For the skin, first of all, the most gentle methods are used.First, try washing off the glue with soapy water. You can rub your hands with scrub, soda, salt, pumice. Oily products are suitable for eliminating pollution: oil, cream, petroleum jelly.
TREE
Superglue is removed from a wooden surface with nail polish remover containing acetone, gasoline, alcohol, "Dimexidum", "Antikley". To remove the stain, the agent is applied to it for some time, after which the residue is removed with a cloth and wiped off first with a damp cloth, then with a dry one.
Phone or laptop screen
To remove superglue from monitors and screens, you can use Dimexide, an acetone-based nail polish remover, pure acetone. The agent applied to a cotton ball removes the glue stain, after which they first wipe the office equipment with a damp cloth and then with a dry cloth.
Mineral engine oil
Mineral motor oil is a good choice for unpainted wood. The tool is not suitable for all materials, it can damage the surface covered with varnish or paint. Oil is applied to the dirt and wait half an hour, after which the glue stain is picked up from the edge and carefully separated from the object.
How not to
To remove dried superglue without damaging the surface and harming your own health, you need to remember what actions you should not take:
- Do not work with glue without protective gloves. If you plan to apply glue to surfaces on the ceiling or on the upper part of the wall, remember to protect your hair with a hat and your eyes with goggles.
- Do not use toxic solvents in unventilated rooms.
- It is forbidden to use flammable substances near open flames.
- Do not use a product on a material if you do not know how it will react.
- Do not use harsh chemicals to remove glue residue from dishes, food containers and other items that interact directly with food.
- When removing superglue from stuck fingers, do not jerk them sharply in different directions, as this can seriously injure the skin.
Adhesive precautions
Before starting work, the table surface is protected with paper or oilcloth, and protective gloves are put on the hands. They hold the tube with glue with the tip away from you, squeezing the composition into a small drop, so the risk of getting excessively dirty is minimal. If the package was opened earlier, and the spout hole is dry, it is carefully pierced with a thin needle, trying not to pinch the walls of the tube. When the glue runs out, the residue must be wrung out very carefully so that it does not protrude from the cracks in the case.
Secondary glue will help you quickly repair damaged things, but at the same time, its excess or dried marks on objects and the skin of the hands can themselves become a problem. To prevent this from happening, you need to work with the glue carefully, taking precautions. In case of unexpected stains, you should know which cleaners are suitable for different materials and prepare them in advance.