22 ways to make water slime at home

Slime is a popular toy born in 1976. On the territory of Russia and the CIS countries it is better known as slime. Not only adults, but also children love to play with it, and you can buy it in almost any toy store. Slime does not need to be purchased. You can do it yourself without much effort. Let's see how to make slime with water yourself and what other ways to prepare it exist.

What is the importance of the component

At the heart of any slime is a combination of components that give the toy 2 main properties:

• viscosity;
• viscosity.

In early prototypes of the toy, borax and guar gum were responsible for this. To date, many combinations have been invented, the use of which gives mud new properties.

To note! Most recipes use water as the base ingredient.However, there are options that can be dispensed with.

Basic methods

Human fantasy knows no bounds, especially when it comes to entertainment. Today it is difficult to count all the recipes that allow you to make this favorite toy at home. Among the most popular are:

• modeling clay sludge;
• of flour;
• shaving foam;
• edible sludge;
• shampoo-based lizuns;
• from a non-Newtonian liquid;
• with silicate glue.

These and many other recipes allow you to plunge into the world of exciting experiences not only for children, but also for their parents.

modeling clay

A lot of modeling clay has accumulated at home, and you don't know what to do with it? Make it a slime. Thus, you do not need to throw away your obsolete equipment, and the child will receive a new, exciting toy. For crafting, you will need to prepare:

• plasticine of any color - 100 grams;
• container for preparing the mixture;
• a glass of cold water;
• food gelatin - at least 15 grams;
• half a glass of warm water.

Place the gelatin in a container and dilute it with cold water. We set aside the dishes for several hours so that the gelatin dissolves properly. While the water solution is infused, we dilute the plasticine in a hot liquid. We combine gelatinous water and diluted plasticine, after which we put the mixture in the refrigerator. We wait 1 hour, and the slime is ready.

shaving cream

There was no plasticine at home - do not be upset. Borrow some shaving cream from your dad. This will make for an equally high quality product. To make it you will need:

• shaving foam - 60 milliliters;
• borax - 4 teaspoons;
• glass of water;
• PVA glue - 35 milliliters;
• two containers for mixing the ingredients.

Look at Also

Why slime does not work, what to do if slime is runny and does not thicken

In one container we mix water with borax, and in the other - foam with glue. Constantly stirring the mixture, pour the water solution into a bowl with foam and glue. As soon as the mass stops sticking to the walls of the container, the toy is ready. Before giving it to a child, you need to knead the mass in your hands for a few minutes.

Flour without sodium tetraborate

One of the most affordable and simple recipes that even a child can repeat. To prepare it, you will need:

• any dye at hand. It is advisable to use brilliant green or iodine;
• flour - 450 grams;
• hot water - 60 grams;
• cold water - 60 grams.

Algorithm of actions:

• pour cold water into the sifted flour;
• add hot, but not boiling water;
• mix well;
• add iodine or brilliant green;
• refrigerate the mixture for 5 hours.

nail polish

Housewives often have an unnecessary jar of nail polish that can be used to easily make the children's favorite toy. The composition of the mixture for slime:

• nail polish;
• borax - a few drops;
• water - 30 grams;
• PVA glue - 30 grams.

Procedure:

• mix PVA glue with varnish;
• stirring without stopping, add water;
• borax is introduced into the mixture;
• continue to stir until smooth.

PVA glue and glue stick

Making slime from a glue stick takes a bit of tinkering. You will need:

1. Remove the glue from the plastic casing and cut it into small wedges.
2. Place the glue in a container and microwave it for 1-2 minutes.
3. Once the substance has melted, it should be allowed to cool to room temperature, remembering to stir occasionally.
4. We dilute 1 spoon of soda in hot water and mix the liquid with melted glue.
5. Add half a teaspoon of PVA glue to give the slime a denser, matte texture.

To note! When heating in a microwave oven, it is advisable to cover the glue container with cling film. Thus, you will get rid of the unpleasant smell and will not stain the interior of household appliances.

Edible Slime Variant

Some toys are not only useful for the development of the child, but also very tasty. To make edible slime for your baby, you need to prepare:

• chocolate paste;
• marshmallow.

To make a slime from these ingredients, you need to melt the marshmallow, then knead the chocolate dough into it. Stir everything together until smooth and let cool slightly.

baking soda

When making slime from baking soda, mix it with orange or pomegranate juice. The juice acts as a colorant. As soon as a homogeneous and colored porridge is obtained, glue is added to it.

Thoroughly mix the ingredients again and let them infuse a little. Then the mud is sent to a plastic bag, where it must be kneaded until soft.

Make a magnetic slime

To make a slime that reacts to a magnetic field, you will need:

1. Mix a glass of water with three tablespoons of borax.
2. In a separate container, mix another glass of water with 30 grams of glue.
3. Add the required dye to the glue solution.
4. Mix all ingredients.
5. Add iron oxide. Keep in mind that the more iron oxide there is in the final mix, the more the mud will react to the magnet.

Glittering

To make a shimmering, iridescent slime, you will need:

• mix a cup of glue with water of the same volume;
• divide the mixture into 4 equal portions;
• color each serving a distinct color, using any food coloring;
• a little starch is added to each container;
• knead the multi-colored portions until the substance thickens to the required consistency;
• we combine monophonic slimes into one mass and mix again thoroughly.

Look at Also

Recipes for making gelatin slime at home

Starch free

Starch is not a mandatory ingredient, and if it is not available, you can do without it. There are many recipes, but 2 combinations of components are considered the most effective, which we will talk about below. below.

The first way

Fill a bowl with water, then add the guar gum previously sifted through a sieve. Mix the liquid well, then strain it through a sieve. This technique will eliminate the formation of lumps. To create colored slime, a small amount of dye is added to the solution.

At the final stage, add soda and liquid for storing lenses, after which we gently mix the solution. You need to stir for at least 5 minutes to get the necessary elasticity. Soda and lens fluid require no more than 2 tbsp.

Second way

The second method is much simpler than the first, because only a few elements are necessary to carry it out:

• flour;
• the water.

Mix 1 part flour with 2 parts water. Add the desired dye and the toy is ready. If necessary, the mixture is divided into several parts, painting them in different colors. Then they are combined together, pleasing to the eye with a rich color palette.

Glass

It is made longer than the others, but the result is 100% justified. Compound:

• boric acid;
• silicate glue;
• the water.

We mix the glue with water, then add boric acid.Stir the substance until it is smooth, after which we do not touch it for at least a day. During this time all the air bubbles will come out of the mud and it will look like glass.

With salt

Salt is another inexpensive ingredient that makes it easier to make a toy for your child. Composition of the mud:

• salt;
• a soda;
• soap.

Knead salt and soda in a bowl with liquid soap in small portions. We repeat the action until the soap turns into a thick gelatinous mass. We send the slime to a cold place for a while so that it takes its final shape.

With starch

Starch slime is absolutely harmless to the baby, which is important for any parent. Prepare:

• water at room temperature - 100 milliliters;
• dye;
• starch - 1 cup.

Combine starch and tincture in a cup. Then pour water in a thin stream, stirring constantly. Water is added until the mixture turns into a jelly.

To note! Toys with a minimum of chemicals have a short lifespan.

With cornstarch

Ingredients to create a toy:

• cornstarch;
• shower gel;
• food coloring.

Algorithm of actions:

• pour the shower gel into the container;
• add the cornstarch;
• we mix the dye;
• knead the ingredients until the substance in the bowl looks like modeling clay.

With shampoo

Wait for a recipe that does not require much time and effort from housewives:

• we take any shampoo and pour a pinch of salt into it;
• to mix together;
• repeat the procedure until the liquid shampoo becomes gelatinous;
• we send the mass to the refrigerator for several hours.

Look at Also

How to make starch slime at home with your own hands

Of ice

Take 4 ice cubes and add them to a container of cold water.Mix a few tablespoons of soda into the liquid. After the substance has become homogeneous, add 100 milliliters of glue. Stir until the slime is firm to the touch.

With soda

soda slime turns out to be identical to the one in the store, and its production does not take much time and effort:

• pour PVA glue into a cup;
• add dye;
• to mix together;
• add soda dissolved in water;
• stir for a few minutes until a homogeneous mass is obtained.

cloud slime

To make cloudy slime, we take:

• styling mousse - 4 milliliters;
• baby oil - 4 milliliters;
• borax;
• glue 100 milliliters;
• artificial snow;
• shaving foam - 20 milliliters;
• foam for washing - 4 milliliters.

All components, except artificial snow, are mixed. Mix the snow with water according to the manufacturer's recommendations. We combine all components into one mass.

Of a non-Newtonian fluid

To prepare a non-Newtonian liquid, it is necessary to combine two substances in equal proportions. For the manufacture of slime used:

• starch;
• the water.

We fill the container with the required amount of starch, then carefully pour water into it, constantly stirring.

With hydrogen peroxide

Mix 200 milliliters of water and 100 grams of starch. As soon as the mixture becomes homogeneous, add 100 grams of PVA and a few drops of hydrogen peroxide. Stir in coloring if necessary.

With silicate glue and boric acid

We take silicate glue and add a little dye to it. Then add a few drops of boric acid, remembering to stir the slime. In the last step, to give the slime the desired shape, it is crumpled by hand for several minutes.

Piece of sugar

We take sugar water and glue in equal proportions and mix with each other. With the right proportions, a white slime is obtained, similar to a piece of sugar.

To note! This slime should not be eaten and the sugar is only added to give the toy a specific look.

What to do if nothing works

A negative result in the manufacture of slime is obtained due to:

• non-compliance with the cooking sequence;
• poor quality materials used in the manufacturing process;
• wrong proportions.

If you did everything correctly, but the slime still does not come out, continue kneading the ingredients until the mass becomes viscous and homogeneous.

Home storage rules

Keep the slime in an airtight jar, sprinkle it every day with a few pinches of salt. There should be water at the bottom of the pot. After adding salt, the jar is closed and the contents are gently shaken. Remember to wash off the slime in a bowl of water when the child has played with it enough and will no longer use it for its intended purpose. It is advisable to store the toy in the refrigerator.

Precautionary measures

When playing with slime, you cannot:

• Eat it;
• use components to which the baby is allergic;
• crumple it for a long time, as this quickly wears out the toy;
• if there are wounds on the skin, contact with mud is categorically contraindicated.

Tips & Tricks

When making a slime, try not to experiment on your own. This can have sad consequences not only for you, but also for the child.When buying slime in a store, try not to save money, because cheap toys are made from low-quality materials. Try to be close to your child while they play so they don't accidentally eat the toy.