Instructions for use and technical characteristics of the E8000 glue
Using E8000 glue for fixing mobile devices allows you to achieve excellent results. Also, the substance is suitable for bonding other materials. After drying, the composition remains plastic. It is waterproof and vibration resistant. After heating to 80-100 degrees, the glue acquires a soft consistency. This allows the parts to be separated during the next repair without damaging them.
Description and function of the adhesive
E8000 glue is considered a multi-purpose agent. Most often it is used to repair elements of mobile devices. But at the same time it is often used for gluing glass and metal surfaces. The composition is suitable for fixing wood, switchboards and other electrical equipment.
The use of the product makes it possible to obtain a high fixing force. The characteristics of the finished joint can be compared to a cast material. Sometimes it turns out to be stronger than the parts to be glued. Users note that the use of the composition makes it possible to achieve complete transparency of the contact layer. After using the substance, there are no visible sizing seams. Therefore, the tool can be used to repair expensive products and securely fasten metal, plastic or glass parts.
This opportunity contributes to a significant expansion of the scope of composition.Glue has special repair characteristics, which is why it is often used in maintenance practice.
By fixing electrical components, it is possible to achieve strong contact between conductive surfaces with absolute conductivity. This feature allows widespread use of the substance in the professional repair of computers, cell phones, laptops and other gadgets.
With the help of glue, it is possible to carry out the fastening of such materials:
- metal;
- drink;
- glass;
- fiberglass;
- textile;
- bamboo;
- leather;
- rubber;
- decorations;
- paper;
- electronic;
- nylon;
- Plastic.
This glue has many advantages:
- Fixing reliability. Using the substance, it is possible to glue glass and plexiglass, which are often used in smartphones.
- Transparency. The composition is absolutely invisible on the surface of the product.
- Moisture resistant. The components of the glue make it resistant to high humidity.
- Resistance to mechanical damage. The glue is considered quite dense, as it is able to withstand even strong blows.
Composition and specifications
The glue is sold in packs of 15 milliliters. It includes acrylic and therefore has a fairly thick consistency. The composition is used by service centers for the repair of mobile phones, computers. With its help it is possible to glue the frames of touch screens and buttons.
The product has a transparent texture. The hardness parameter is 80A.
The composition is very resistant to external factors, but at the same time it penetrates poorly into porous structures. The tool can be used for fixing joints in metal, glass, brick, vinyl.With its help, it is possible to fix ceramic, fiberglass, leather, rubber and wooden elements. A distinctive feature of the composition is that when heated to 100 degrees, the glue seam retains its softness and plasticity.Thanks to this, it can be easily removed.
Manual
In order for the substance to give the desired results, it is important to strictly follow the rules of use. To apply the glue, do the following:
- Clean and degrease the surface. It is important that it be as dry as possible.
- Pierce the seal in the neck of the tube. In this case, you should be guided by the pointer on the cap.
- It is recommended to check the quality of the adhesive before use. To do this, it must be applied to a small area.
- It is best to apply the composition at a temperature of + 21-30 degrees.
- At lower temperatures, the curing time increases.
- It takes 24-48 hours to achieve maximum bond strength.
- To connect the smooth elements, a thin layer of glue is applied to both surfaces. After that, it is recommended to wait 2-5 minutes and press the parts together.
If the glue accidentally exceeds the limits of the product, it can be easily removed. To do this, you need to swipe your finger on it. As a result, the substance forms a lump. A needle or toothpick will help remove the residue.
Analogs
There are many analogues of E8000 glue:
- B7000. It is one of the most popular formulations used as a touchscreen sealant. In this case, the tool is considered multi-purpose. It can be used to fix glass, plastic, wooden, metal elements. Key features include high bond strength. The finished seam can be safer than the fasteners.
- T7000.This tool is also used to repair touch screens and cellular modules. A distinctive feature is considered black. Therefore, it is permissible to use glue to repair dark casings. The product is resistant to humidity and mechanical factors.
- T8000. This composition is actively used for domestic purposes. However, the main purpose is considered to be fixing touch screens. According to the principle of action, the composition resembles double-sided tape, but provides a stronger connection. Once repaired again, the substance can be easily removed by heating and rolling. It takes 3-5 minutes to dry the composition. The final drying time is 1-2 days.
- B8000. The composition is also intended for sealing and fixing touch screens. The tool is intended for repairing iPhone parts, as it certainly does not corrode surfaces. If you want to remove the glue, heat it with a hair dryer. The product has a completely transparent consistency. Polymerization takes 2-3 days.
E8000 glue is very effective and helps to correct details of mobile devices and other gadgets. To be successful in using a substance, it is worth using it correctly. To do this, it is recommended to thoroughly clean and dry the surface, then apply a thin layer of glue.