Basic methods for correctly folding a jacket so as not to wrinkle it
It is customary to store outerwear on soakers, wrapped in special fabric or covered with a blanket for the summer season. But it is not always possible to put everything in the locker room, for some there is simply no place. Therefore, it is important to know how to fold the jacket quickly. Also, this skill is required if a person goes on a business trip, where he picks up a jacket, but he does not want to start ironing from scratch.
Basic methods for stacking a jacket
There are different ways to fold a jacket. However, some of them require prior flipping, others do not. The most common way is to roll it up with a roller, after which the clothes still retain their original ironed appearance. Outerwear rolled into a rectangle is less likely to stay tidy. But this method takes a minimum of time. If the likelihood of something spilling out is minimal, you can fold the jacket without turning it inside out.
Roll
In order to roll a jacket into a cylinder, you need special precision and skill. The algorithm is quite simple:
- carefully iron the jacket;
- turn a sleeve inside out;
- extend the shoulder along the required line;
- insert the second sleeve into the first along the entire length, while, of course, it is not necessary to turn it over;
- place outerwear on a large, flat table;
- combine the edges of the product;
- fold evenly, along the side line;
- make sure that the elbow is along the seam itself and does not exceed its limits;
- put something voluminous on the hollow of the shoulder and it will not be a pity that it wrinkles (for example, a T-shirt for sleeping, a couple of warm socks);
- roll slowly into a roll or cylinder.
When folding, proceed with care. Wrinkles may form. To prevent this from happening, it is necessary to straighten the tissue sections, if planned.
Most often, the cylinder stacking method is used in the event that you need to put the jacket in a closet for storage.
If you plan to take your things on a trip, it is better to fold them differently - it will take up less space.
Rectangle
The rectangle folding option allows you to quickly place items at the bottom or against the side of the case. Space saving because the jacket takes the shape of a small flat rectangle. It is done like this:
- hold the jacket with your hands;
- flip one shoulder upside down;
- leaving the sleeve in the initial position;
- the second shoulder, without twisting, folds inside the already turned over;
- it should turn out that the wrong side remains outside the jacket in a folded state, and the sleeves are inside;
- align along the entire length so that no creases form;
- fold strictly in half along the seam, if it is in the middle;
- fold twice (for short length items) or thrice (if the jacket is below the hips).
A jacket folded in this way can be folded into a bag or suitcase, packed into a suitcase and put other things there.
Without eversion
The non-reverse fold option does not always give the best results. Wrinkles may form on the outer back of the product. Therefore, it will not be superfluous to take a special fabric steamer with you in your luggage.However, it is necessary to turn it off, which significantly speeds up the procedure. Would need:
- fold the jacket on a flat surface with the outer side down;
- straighten on its surface so that no creases form;
- bend the extreme part of the product back (for this you need to visually divide one of the parts of the thing into two parts);
- perform identical manipulations for the second side;
- fold in half.
Inside such a jacket you can immediately put on pants, pre-ironed and correctly folded.
How to fold a suit correctly
Basically, the jacket is folded in one of two last ways. The pants are placed inside. So that there are no creases on them, the arrows do not need to be ironed, you need to learn how to bend them correctly:
- take pants to the waist;
- stretch them to the full length (this will require raising your hands);
- fold the pants strictly according to the arrows, for this you need to hold it with one hand, and with the other to catch the folds of both pants;
- connect arrows;
- straighten the legs to avoid folds;
- bend on a flat surface and level again;
- fold three or even four times - depends on the length and width.
It is important to take into account that the lower leg must be inside the rolled product. And the belt should only be on the outside. If you change the order of distribution, the hem may be very wrinkled.
How to pack your costume for a trip
You can fold the suit for travel using the rectangle method. Pants - classic version. In this case, the belt should definitely be pulled and folded separately into a narrow pocket, so that it does not alter the line of clothing, and its sharp parts do not scratch it.
Useful tips
Alas, it is not always possible to achieve an ideal result, even if all the manipulations are carried out correctly. The costume is always folded separately from other things. This thing gets dirty easily, even if it's black or gray. Therefore, special brushes and covers are used for protection. Otherwise, a small plastic bag will do.
For better preservation, it can be wrapped with tape or fixed with a pin, but do not tie the ends - the clothes line will be damaged.
Recommended:
- do not put on shoes and do not put heavy things, objects on the folded jacket;
- put the jacket down in the middle or on the sides, but if the walls of the suitcase are dense;
- use special protective covers;
- store other badly creased items inside the jacket, e.g. ties, silk or linen shirts;
- it is not necessary to distribute underwear, accessories in pockets, because this is how the shape of the clothes can change;
- it is better to leave some air in the bag - this will protect the suit from excessive pressure during the trip;
- try to wrinkle the fabric - it may not wrinkle at all, and it may not complicate your life.
If it is wrinkled after long storage in a suitcase, you do not need to immediately apply for paid ironing. Most hotels have free irons and steamers.