Instructions on how and with what you can glue the blind with your own hands
Freight transport is often equipped with an awning frame. The material is exposed to environmental influences on a daily basis and can be mechanically damaged or wear out over time. To determine how to properly glue the blind with your own hands, you need to determine the degree of wear, choose a suitable adhesive composition and carry out the restoration of the material step by step.
What glue is suitable for repairing the awning of trucks
The awning is synthetic material canvas, banner fabric, tarpaulin, PVC. For the repair of these materials, only certain compositions are suitable, which provide a reliable connection of several spare parts to each other.
Special glue for PVC "Vinstik"
The glue solution "Vinstik" for PVC makes it possible to create a strong and transparent seam, resistant to the influence of liquids, while maintaining the index of elasticity. The composition dries in a few days at room temperature.
The adhesive is suitable for repairing cuts and holes in PVC tarpaulins by securing the patch to the damaged area.
"Desmokol"
Desmokol polyurethane glue is intended for the repair of PVC fabrics.The solution is transparent, so it does not leave marks and streaks after drying. Due to the high flammability during work, it is necessary to avoid contact of the substance with heating devices or open fire. After application, the solution ensures a solid bond of the surfaces, without the risk of displacement and tearing of the patch of the structure of the blind.
"Cosmophene"
The "Cosmofen" mixture has universal characteristics, which makes it possible to use it in work with any materials. The fast-setting cyanoacrylate glue is easy to apply and requires tight compression of the treated area with a press for a solid bond. The mortar experiences ambient temperatures up to +80 degrees, therefore the joint should not be exposed to more heat so that the glue does not melt. Due to the release of toxic components when using "Cosmofen", it is necessary to repair the car awning in a constantly ventilated room.
Fast
The Rapid brand thermoplastic compound reliably removes defects from the tarpaulin, maintaining the tightness of the tape over the damaged area. The adhesive should be used in combination with a hardener and heated before application. The solution is suitable for repairing fabric tarpaulins.
How to glue correctly
Minor damage to the tarpaulin of a transport vehicle can be repaired by yourself. To do this, you must determine the nature of the defect and follow the appropriate instructions.
What is necessary
Before proceeding to the direct repair of the canvas, you need to prepare tools and materials. Including, for work you will need:
- glue selected for the specific material from which the blind is made;
- building hair dryers;
- a roller for treating a patch;
- nylon thread and a large needle.
Gluing Instructions
There are several ways to fix the damage. Which one is better to choose depends on the size and type of defect. If the deviation is large, then during the work the following instructions are followed:
- The rupture zone is sewn with nylon thread. This will create the necessary tension on the fabric, reduce the distance between the pieces to be glued and prevent them from accidentally moving during the gluing process.
- Clean and degrease the surface of the material and the patch. The acetone treatment provides a secure grip, making the patch more firmly adhered to the tarp.
- Apply an adhesive solution to the surfaces to be bonded. Using a composition based on polyurethane, you will have to resist it, then firmly press the patch to the fabric. When using thermoplastic glue, the treated area is heated with a construction hair dryer and rolled up from above with a roller.
In situations where the gap is small, you can try to repair the defect with a hair dryer and a piece of PVC fabric. An object with a hard surface is placed under the place of gluing, a cloth is applied to the gap and heated until it sticks. Then they roll over the area with a roller, which should have a special non-stick coating and not stick to the fabric.
This method is relevant only for small defects, since in large damaged areas it will not be possible to ensure uniform heating and melting in all places. The presence of a single weak zone will cause repeated tissue breakdown.
Features of working with the product on a gazelle or truck for trucks
If it is necessary to glue the damaged part of the awning to a cargo truck or gazelle, you will need to observe a number of nuances. Before carrying out the work, the transport should be taken to a garage or other room where the optimum temperature is maintained and there is enough space to get to the defect on the canvas.
For convenience, it is best to remove the shade from the car so that force can be applied when attaching the patch and not having to reach into damaged areas, but if the design of the vehicle does not does not involve the removal of the canvas, then you will have to work under the existing conditions.
After eliminating the defect during the period of drying of the glue solution, it is not allowed to load the blind, so as not to break the joint formed.
Common Mistakes
Lacking practical experience or ignoring the instructions for eliminating damage to blind structures, many often make mistakes. The most common errors include:
- Use for repairing a construction heat gun blade. The performance of the tool is not suitable for working with tarpaulins, and the result of their use is often a violation of the geometry of the fabric, which may lead to the need to replace the fabric.
- Patch overheating. Prolonged treatment of the patch with a construction hair dryer leads to melting of the material and loss of a solid structure. As a result, continued operation of the blind causes a break in the treated area.
- Sticking the patch with an unsuitable solution. To connect the patch to the canvas, you only need to take specialized solutions to create a strong connection.
- Roll the bonded surface with a roller whose active part is not made of heat-resistant silicone.In particular, it is forbidden to use rubberized, metal and plastic rollers.
- Bonding without prior sewing of the damaged area. If you do not secure the edges of the slit with nylon thread, the bonded patch will shift from its original position or come off when exposed to the environment.
Additional tips and tricks
In order to properly repair the awning, you should not only follow the standard provisions of the instructions, but also familiarize yourself with the list of additional recommendations. Among them are the following:
- As a patch, it is better to take a fabric of the same material as the canvas itself. The patch should be durable with no frayed edges.
- Tape is not used instead of the damaged area, as it is not a reliable way to fix the problem. Only certain types of adhesive solutions are able to fix the patch.
- Doubting your own abilities, you can always contact the workshop, where the integrity of the canvas will be restored. In addition, in specialized services it is possible to repair even very large defects.
- If the tape has stretched along the seam, after sewing with nylon thread, it is recommended to apply an additional layer of adhesive solution.
- When performing work, it is imperative to observe the instructions for using the adhesive and the basic rules for gluing the patch to the canvas. In particular, it is impossible to carry out repairs without first degreasing the surface, because otherwise the adhesion of the materials will deteriorate.
By adhering to simple tips and tricks, it will be possible to carry out high-quality repair work and restore the condition of the canvas.If the wear is so bad that the blind breaks again with minimal external impact, it is easier to replace the fabric.