How to properly hang a rug on the wall, step by step instructions and the best ways
Modern designers use a variety of materials for wall decoration. Carpets are used less and less for this purpose. However, this design option is sometimes still used. For this, modern coatings are suitable, which help to achieve an unusual and attractive interior. That's why people often wonder how they can hang a rug on the wall.
How to properly hang with nails
Before starting the process, it is worth considering the following characteristics:
- The tapestry should not be placed near the ceiling. This will damage the electrical wiring. The carpet is placed 15-20 centimeters from the ceiling.
- It is recommended that carpets be cleaned periodically. Therefore, the fastening must be made sufficiently reliable. It must withstand cleaning.
- The definition of the top and bottom of the product is also important. For mats this is often not important, but sometimes the location plays a decisive role.
Before attaching the carpet to the wall, it is worth choosing a method. There are several options, the choice of which depends on the characteristics of the product:
- Large rugs and medium-sized products with a large weight should be hung on the eyelets. You can also use clasps or rings.
- Small items can be hung on the wall with nails. Rings and clasps are considered equally successful options. It is also allowed to use special cornices.
- Tapestries can be hung in different ways. It is better to use 1 or 2 boards so that the product hangs evenly when pulling it.
What is necessary
To fix the carpet with this method, it is worth preparing the following:
- nails;
- hammer;
- pliers;
- wood planks.
Work instructions
There are a number of mat attachment options. To do this, use the following materials:
- Nails that have plastic tips on the caps. They are sold in hardware stores. It is recommended to carefully nail the mat to the fixed strip. This should be done from left to right. Driving nails into the rug edge or fringe is not recommended. It is advisable to step back 1-2 centimeters from the pile of the product. The distance between the fasteners should be 10-15 centimeters. It all depends on the weight of the mat.
- Nails whose cap is torn off with pliers. The particularity of this method lies in the early preparation of the small nails. In such a situation, it is worth removing the caps with pliers or wire cutters, and then driving them at an angle into the wall bar. This is done at the same distance - about 10 centimeters. In this case, the hooks should protrude 1-2 centimeters from the board. The exact distance depends on the thickness of the carpet. It is worth hanging the product on the resulting structure. In this case, the upper part of the carpet must be pulled and threaded over the nails.
The disadvantage of using nails to fix the product is the need to drill holes.If you place the fasteners too far, the product may sag. As a result, there is a risk of stretching the carpet and deteriorating its appearance.
Alternative Mounting Methods
There are many alternative methods to repair the item. Each of them has certain advantages and disadvantages.
Use a wooden slat
In order not to make too many holes, you can use a special wooden batten. It is attached to a concrete wall. This is done with pegs. If the width of the carpet corresponds to the dimensions of the room, the pegs can be hidden in the corners.
It is worth attaching a decorative canvas directly to the rail. In order for it to keep its shape well, it is allowed to use another rail at the bottom. When choosing this element, it is important to consider that the carpet will lag behind the wall. Therefore, it is worth choosing a delicate product.
On metal rings
This is a very expensive and time-consuming method. For its implementation, it is worth fixing special rings on the sewn side of the mat. It is recommended to do this with an interval of 10-15 centimeters. These materials can be purchased at hardware stores.
Then the rings should be hung on the nails attached to the bar. Screws are also suitable for this purpose. The advantage of this method is the ability to remove the mat at any time.
In addition, it avoids the appearance of unwanted holes in the canvas.
On nylon fishing line
In order not to use metal rings, it is worth using a nylon fishing line. This method also requires yarn. To do this, a seam must be made from the inside of the top of the mat. It is made using a nylon thread. The dots should be about 5 millimeters long.
A strong steel wire must be passed through the seam.It is recommended to place the resulting structure on small eyelets, which must be driven into a wooden board.
The advantage of the method is the uniform distribution of the product over the entire length of the rail. This prevents creasing or sagging.
On hooks and glue
Clothes hooks are used to hang the textile. You will also need thick cardboard and high quality glue. This method allows the mat to be anchored without drilling into the wall.
To do this, it is worth making cardboard squares. Their dimensions should be 4x4 centimeters. You need to sew hooks to them with a nylon thread or fishing line. On the wall you need to make marks and glue hooks sewn on the cardboard. This is done at equal distance.
Sew the rings to the back of the tapestry. You can also make carnations. For this, it is recommended to use strong threads. It should be done at the same distance as the hooks. After that, the canvas can be hung on the loops.
Attaching the mat to the wall is not so difficult. The easiest and most reliable method is the use of nails. However, there are many other great ways to avoid having too many holes in the wall. Thanks to this, each person will be able to choose the best option.