7 Ways to Make DIY Slime Using Paper and Other Ingredients
Having learned that slime can be made even from paper, many wonder how this is possible. For the recipe, toilet paper is used, since its structure is soft. Provides an ideal base for a toy. It's very simple and quick to prepare, so the recipe deserves attention like the others.
Characteristics of toilet paper slime
It is important to choose a very soft material. And the softer the toilet paper, the better. The main secret to making slime is to completely dissolve the paper. Otherwise, nothing will work. It will take a long time to get the right result. Kneading takes most of the time. In addition, it is necessary to mix the components well and do it constantly. As a result, the slime will turn out light and airy.
An anti-stress toy from toilet paper is prepared with the addition of various components:
- liquid lipstick;
- sodium tetraborate;
- shampoo;
- glue, colorless is better;
- Hot water;
- thickener - of course;
- soft modeling clay.
There should be no excess moisture in slime made from toilet paper. For this, a colander is used, through which the remaining water comes out. In order for the result to be ideal, the mass is left for a day for the complete evaporation of moisture.Then the slime will get the best quality.
Basic recipes
Slime is prepared from various ingredients. There are many recipes. Some of them do not give exactly the result that a person expects, or do not act at all. But there are those that have been tested by more than one handmade toy lover.
nose drops
Slime according to this recipe turns out transparent due to the list of components. It will take more time to prepare it, since there are no strong thickeners in the composition. What to prepare:
- 20-30 g of water at room temperature;
- 0.5 tsp a soda;
- 35-55 g of stationery glue;
- 1 packet of nasal drops.
The slime is made as follows:
- In a prepared bowl, the baking soda dissolves in the water.
- After kneading, no lumps should remain.
- Then glue is added and everything is mixed again. The result should be a homogeneous mass.
- Nose drops are added little by little. After each serving, the liquid is mixed. Thus, the entire contents of the bottle are poured.
- After all the drops have been added and the mass has acquired a homogeneous consistency, it is transferred to a plastic container. It is desirable that the container has a lid and is tightly closed.
- In the cold, the slime must stay at least 3 hours. The time varies from 3 to 5 hours.
Nose drops can be replaced with eye drops. A contact lens solution will also give a good result. For the recipe, one of these liquids will come in handy.
With shaving foam
Such a toy is prepared from only two components. You will need foam and a tube of glue. The glue is squeezed into the container, to which foam is gradually added.The mass is thoroughly mixed until it becomes homogeneous.
Slime according to this recipe turns out to be white, but it can be given an interesting shade. It is worth adding 2-3 drops of dye, and the toy becomes more interesting and unusual. If you add 2 colors at once, a marbled pattern will be visible on the slime.
Of flour
The recipe has the advantage of being safe for even small children to play with. And due to the lack of glue in the composition of the slime, it also turns out to be edible, which will please the baby even more. To make a slime you need 300 g of flour, ¼ of a glass of hot water and the same amount of cold. At the stage of kneading, watercolor paint or gouache is added.
Can be replaced with food coloring if the slime is prepared for consumption.
Flour is mixed with water until smooth. After that, it is removed in a cool place for 2-4 hours. Under the influence of cold, the mass becomes more elastic and stretches well, which is necessary. Mud turns out unpretentious, but does not contain harmful components in the composition.
air cloud
To make a slime you will need a lot of ingredients. When done, it looks like a marshmallow. What is necessary :
- liquid soap;
- silicate glue;
- shaving cream;
- sodium tetraborate;
- sequins, dye;
- sunflower oil.
Cooking steps:
- A homogeneous mixture consists of glue and shaving foam.
- After mixing, boron, soap and oil are added.
- Everything is mixed again.
The mass is taken in hand and kneaded for a long time. It is best to do this with your hands. Used immediately without going cold.
With shampoo
For crafting you need starch.Pasta is prepared using water. For the recipe, corn is used. Shampoo is added to the mass, everything is mixed and sent to the refrigerator for 2-3 hours.
With liquid soap
Prepare in two ways. In the first case, you will need polymer glue purchased at a hardware store. Two parts liquid soap are mixed with three parts glue. The final result of the slime depends on the type and color of the soap.
Cooking according to the second recipe, salt and soda are used instead of glue. After adding the components, the mass is mixed until smooth. In this case, the salt acts as a thickener. If you add a large amount, you get rubber, so a little salt is poured.
How to make water and salt at home
For 200 ml of hot water, you will need 5 heaped teaspoons of salt. Using a spoon, the liquid is stirred until the salt is completely dissolved. The coloring agent is added as desired. Silicate glue is squeezed into the liquid. The size of the slime depends on its quantity. After that, the container is left in this state for 25-30 minutes, without stirring and other actions.
At the expiration of the specified time, the mass is slightly stirred with a stick, and the glue is removed from the water. The water is squeezed out and the mass is kneaded a little by hand to obtain a homogeneous structure. After these actions you can play with the slime.If a dye is used in the cooking process, a plastic container is taken, which is not a pity for this company. Expensive dishes can go wrong.
Tips & Tricks
If the slime is made from expensive ingredients, it needs to be properly cared for. So it will last much longer.Treatment consists of two procedures - washing and adding a pinch of salt every 3-4 days. The repeatability of the procedures depends on the duration of use of the toy.
After washing, it is recommended to soak the mud with towels to remove excess moisture. A pinch of salt added to the liquid while washing the mud will improve the consistency. If the bounce has lost its elasticity, a thickener is added. It is advisable to take the same component that was used during creation. A toy made at home with ingredients requires no maintenance. After losing its original appearance and shape, it is discarded and a new one is made in exchange.