Step-by-step instructions on how to replace the door glass with your own hands
Some interior doors have small panes that break easily. If it breaks, you will have to deal with replacing the door glass. However, before that, you need to figure out how to replace it correctly.
Kinds
There are four types of glass that can be installed in doors.
Transparent
Most often, transparent glasses are installed in door structures, which differ from other types in affordable cost. Of the minuses, the fragility is distinguished, since such a material easily breaks. If the transparent glass is not too cracked, it can be glued with decorative foil.
Mast
Sometimes doors with frosted glass inserts are installed in apartments.Such an interior door not only decorates the interior of the room, but also protects it from the penetration of sunlight.
Also, the advantages of matte material include its high density, reliable sound insulation and moisture resistance.
Corrugated glass and patterned stained glass
The main feature of this type of glass inserts is considered to be their uneven surface and opacity. The advantages of corrugated coatings include a low level of sound permeability, due to which it is possible to protect the room from extraneous noise.
tinted or mirror
Mirrors and tinted glass inserts are more often used in shopping malls, but some manufacturers install them in interior doors. The tint of the glass alters the transmission of light with the glass and makes it less transparent.
Material selection
Before replacing the door leaf, you should familiarize yourself with the choice of a new glass material. It is necessary to consider the following important factors:
- Type of product. You can put ordinary or decorative glass in the opening. Some people install plastic polycarbonate in the door, which is distinguished by its density.
- Dimensions. Particular attention is paid to the dimensions of the canvas, since it must fit into the grooves.
How to remove cracked glass
To properly remove cracked glass, you need to know how to do it correctly.
What is necessary
Highlight several materials that will be needed to do the job.
Gloves
It's no secret that you can cut yourself with glass, and therefore it is recommended to think about hand protection in advance. Experts recommend protecting your skin from sharp glass corners with gloves. Do not use gardening gloves, as they are too thin.Instead, it is better to use durable rubber products.
Broom and dustpan
Broken glass leaves many small fragments that need to be removed. Some people use a vacuum cleaner to clean them, but it is better not to. To pick up debris, you need to use an ordinary broom with a shovel. You have to sweep very carefully to pick up all the debris from the floor.
Chisel
A chisel is the primary tool you should use when replacing door glass. With his help, they carefully remove the sheet of glass and remove it from the door. It is recommended to use small scissors with a maximum thickness of 2-3 millimeters.
Several pieces of thick paper
It's no secret that the glasses are installed in special grooves on the doors. Sometimes the thickness of the glass is not enough, and it begins to hang tightly in the groove of the door. To solve this problem, you need to use a special sealant. Sturdy paper or rubberized material is used for sealing.
small hammer
You will need a small construction hammer to remove the glass from the door. This tool allows you to remove the beads that hold the glass in the groove. It is necessary to beat the glazing beads carefully so as not to accidentally break them with a hammer.
How to shoot
Having prepared the necessary tools, you can begin to remove the broken glass sheet. First you need to remove the door from its hinges and place it on a flat surface. Then, using a hammer and a chisel, they take off and delicately remove the glazing beads responsible for holding the canvas. After that, all remnants of glass are removed from the door.
Arrangement
All unnecessary glass should be removed so that no fragments remain on the floor. To do this, the floor is swept several times with an ordinary broom. The collected waste is put in a trash can or other container. Shards of glass should be removed from the apartment immediately, so as not to accidentally injure yourself in the future.
Checking and replacing the rubber band between the spatula and the glass
Elastic sealing bands are often glued between the glass sheet and the fixing glazing bead, which make it possible to increase the tightness of the joint. Experts recommend removing the old rubber band and replacing it with a new one. When removing, it is carefully torn off with a blade and detached.
What to replace
There are several materials used to replace broken glass.
Special decorative film
Sometimes people stick on broken glass with special decorative strips. The surface of the film is opaque and weakly transmits light. The advantages of such material include the fact that it fits well into any interior of the premises.
Fiberboard sheet
Some people don't have new glass to replace and have to use other materials. Most often, sheets of fiberboard are used instead of a sheet of glass. These plywood sheets are best used to close doors that lead to a utility room or basement.
Glass
The following types of glass can be installed in doors.
Commmon
The common type is plain glass, which is considered the most readily available. The advantages of such a sheet of glass include the fact that it is easy to install.
Organic
Organic sheets are made from a special plastic material.Some experts advise against the use of organic materials, as they are prone to mechanical damage and corrosion. To protect the surface and extend the life of the material, it must be treated with a protective mixture.
Stained glass
Stained glass is the least used because it is the most expensive. The high cost of such products is due to their high strength. It is very difficult to break such sheets of glass. Another advantage of glasses is their attractive appearance.
Hardened
Tempered glass sheets are those that are heat treated during the manufacturing process to increase the level of strength. After heat treatment, the density of the products increases eight times.
Such glasses are most often used in the manufacture of partitions, countertops and glazing.
How to insert
It is necessary to familiarize yourself in advance with how the insertion of new glasses is carried out.
Tools and materials
Allocate a number of materials and tools that will be needed to perform the work.
sealant
A sealant is an elastic liquid that should be used to fill gaps, joints and depressions. When installing new glass, the surface of the installed glazing beads and canvas is treated with a sealant.
small nails
Nails are considered the most common fastening material used to fasten wood products. Small nails are needed to secure the glazing beads to the door.
Hammer
A hammer is an impact tool often used in the construction industry. When working with a door, it is recommended to use rubberized hammers rather than metal hammers. When using them, it is difficult to damage the surface.
Glue
The glass is attached to the door with wooden beads.However, sometimes this is not enough, and you have to use other additional fastening means. The most commonly used superglue is applied to the edges of the glass sheet.
Rubber insert
To better fix the installed glass, use a rubberized insert. It is installed if the door grooves are too wide and the glass hangs down.
Replacement plan
Before putting on new glass, the door grooves are cleaned of glue residues and treated with sandpaper. Then a new sealant is poured into the cleaned recess, above which a rubber gasket is installed. After that, a new glass is fixed in the opening, which is reinforced with glazing beads.
Job characteristics
Highlight some features of the job that you need to be familiar with.
tsargovaya gate
Tsargovy structures consist of vertical struts, which are connected to each other by horizontally located strips. These doors are rigid and durable.
The main feature of replacing the glass in the side door is that you will have to remove the vertical pillars.
Sliding design
It is quite difficult to replace glass on sliding structures. You will have to completely disassemble the door, since the fastening elements of the door leaf are in the sliding system. It is better to entrust this work to specialists who have repeatedly dismantled sliding doors.
Panels
Panel-type doors consist of several removable elements. To access the glass installation site, you will need to remove most of the structural parts. Since they are connected to each other by grooves, they are easy to remove.
Shield
Panel structures are more often than others placed in interior doors. In this case, the glass insert is fixed using wooden beads. To remove the remnants of broken glass, you will need to carefully pry the glazing beads and remove them and the fixing nails.
Bulk Glass DIY Repair
There are several tools that can be used to repair loose inserts.
sealant
To prevent the installed canvas from wobbling, you can use a liquid sealant. It is poured into the grooves between the door and the glass. After curing, the glass inlay will stop loosening.
matches
Matches are considered the most affordable way to eliminate glass sway. Several matches are installed in the corners of the grooves so that the insert is better fixed and does not hang down.
pieces of cork
If there are large gaps between the glass insert and the door, you can use cork pieces. They are installed in the slot and filled with liquid glue or putty around the perimeter.
Refitting the glazing beads
Over time, the glazing beads no longer hold the inserts normally and you have to change them for new ones. To do this, you need to get rid of the old strips and clean the grooves from the remnants of glue.
How to hide a small crack
You can get rid of a small crack as follows:
- treat the crack with adhesives for bonding glass;
- use epoxy glue;
- glue the surface with a decorative film;
- stick the molding on the crack.
How to glaze a blind door
To glaze a blind door, you will need to do the following:
- cut a hole in the door for installing a glass insert;
- make fastening grooves and grooves for fastening glazing beads;
- choose a suitable canvas and install it.
Prophylaxis
In order not to change the material of broken glass in the future, you need to use the door carefully. It is impossible to slap it when opening or closing, because the canvas can crack under the effect of a strong impact.
Conclusion
Products whose glass breaks quickly are often used as interior doors. Before replacing a broken glass insert, you need to understand the main features of such work.