TOP 10 Best Remedies Than Quickly Washing The Sealant From Your Hands
Installation fluid application is an ongoing process. Therefore, even if it gets on open areas of the skin, there is no way to wash it off immediately. After the completion of repair work, the question often arises as to how you can wash off the putty from your hands. Rinsing with water is not suitable here, as the adhesive sticks and hardens quickly. And if you do not remove the traces, direct contact with the material will harm your health. You can eliminate the contamination by simple and effective methods.
How Silicone Can Harm
The silicone adhesive sets quickly. The danger lies in the fact that it can cause allergic reactions on the skin. Itching, redness and rashes appear on the hands. Due to instant drying, the top layer is not removed without damage. Therefore, it is recommended to wear protective gloves.
How to wash
When it becomes impossible to avoid the penetration and solidification of a chemical on the skin, it is necessary to take measures to eliminate it. There are several ways to remove traces of glue at home.
Mechanical method
You can wipe off the solidified product using a mechanical method.It consists of cutting with a sharp instrument or tearing off the top layer of a chemical product. Mechanical removal can leave painful damage to the skin.
After this method, it is necessary to carefully treat the damaged areas of the hands with a disinfectant.
Soap and plastic bag
To rinse the glue off your hands, you can use an easy disposal method with a plastic bag and a bar of soap. You need to take the bag in your hands and rub the contaminated areas with it. The glue will stick to the polyethylene, so the skin can be easily cleaned of the chemical. The procedure should be repeated until the skin is completely cleansed. After that, the hands are soaped and washed under running water.
Solvents
A quick and effective method is manual degreasing. Most solvents have a pungent odor and high toxicity.
Important: It is recommended to handle hands with solvents in a well-ventilated area or outdoors.
Acetone
If some time has passed from the moment of contamination, you can remove the hardened silicone with an aggressive solvent. Dip a cotton ball in acetone and wipe the contaminated area.
After handling, you should wash your hands with soap and grease with a protective cream.
white spirit
The white spirit can effectively clean up pollution. To do this, dampen a lint-free cloth in the solution and treat the oiled leather. After 2-3 minutes, the solution is washed off and the hands are washed with soapy water.
Alcohol
You can use 90 percent alcohol to clean your skin. With a cotton swab dipped in alcohol, the frozen glue should be carefully wiped off. You can not rub for a long time so as not to dry out the skin.
After the procedure, the hands are washed in warm water with soap and greased with cream.
vinegar solution
To prepare the solution, vinegar and water are taken in equal proportions. Then the hands are wiped with the resulting liquid, everything is washed off with soapy water. Laundry soap is recommended. It will wash away the remnants of the vinegar solution without a trace.
Vegetable oil and washing powder
The skin of the hands is rubbed assembly glue with sunflower or other vegetable oil. The procedure is performed as follows:
- half a glass of oil is taken;
- heated in a water bath;
- washing powder is added to the oil container;
- soiled areas are wiped with a mixture.
After thorough treatment, the hands are washed under running water.
Make-up remover wipes
Hardware stores offer disposable wipes to remove hardened assembly fluids. They are impregnated with a special solution that removes glue well on a different basis.
After completing the repair work, you need to wipe your hands well with napkins and rinse with warm water.
Useful tips
There are several guidelines to help you wash your hands. The main advice - when working with assembly tools, you need to wear rubber gloves on your hands.
The following guidelines include:
- after treatment of contaminated areas, hands are rinsed in a soapy solution;
- at the end of the procedure, a greasy cream is applied to soften the skin;
- it is worth using professional constructs that protect against allergic and inflammatory reactions;
- The stuck silicone is removed from the skin by rubbing with the woolen material.
If you don't have gloves, you can protect your hands with a thick soapy solution. When the soap hardens, the film does a good job of preventing the silicone glue from sticking.
During repair work using assembly products, the hands are almost always stained. Different methods acceptable at home can solve the problem.