20 best ways to make slime without thickening

Slime (slime) - a toy for the development of children's tactile abilities. The child is attracted by the possibility of independent transformation of a dense jelly-like room, painted in bright colors. The sludge sold in stores is obtained using special formulations. How to make slime without thickener from the tools available at home?

Basic recipes

To obtain a viscous and dense mass, two main components are needed: a gelatinous base and a sealant.

As a source, you can use compositions with surfactants, with adhesive properties, salt, soda, plasticine.

Shampoo and salt

A quick and easy way to make slime. Pour 50 to 60 milliliters of thick shampoo into a plastic cup or metal cup (with lids). To thicken the detergent, add ½ teaspoon of salt and stir until the crystals dissolve. It is better to use fine salt (the finer it is, the faster and better it will dissolve).

The procedure with the addition of salt is repeated until the desired consistency is obtained.

To improve the plastic properties, the mud is cooled in a refrigerator.

modeling clay

The idea of ​​​​making a slime from plasticine is to give it better plasticity. To do this, mix plasticine and gelatinous mass. Any gelatin is used: vegetable or animal. Prepare the solution according to the instructions.

Knead the plasticine with your hands and gradually add water so that there is a binder with the gelatinous mass. Mix finished thickener and modeling clay until smooth.

Soap and salt

Liquid soap, salt and soda will be needed as building blocks. Mix the salt-soda mixture (1: 1). 100 milliliters of liquid soap are poured into a plastic container. Gradually pour in the mixture, stirring until smooth. When the composition acquires the required viscous properties, cool the slime for several hours.

Look at Also

How to make pearl slime with your own hands at home

shaving cream

You can make slime from shaving products and stationery PVA. Squeeze the glue into a bowl and gradually incorporate the mousse. The process ends when a viscous white mass forms. For coloring, gouache is poured into the mixture while mixing.

Of flour

Short-lived, but the safest slime kids can play. Compound:

• 300 grams of sifted flour;
• 100 milliliters of water;
• food coloring.

Kitchen shades:

• first, the flour is mixed with 50 milliliters of cold water, until a homogeneous mass is obtained;
• 50 milliliters of hot water with food coloring (temperature 70-80 degrees) are injected and kneaded until plastic;
• chilled in the fridge until completely chilled in cling film.

The amount of liquid is adjusted to obtain the desired viscosity. The younger the child, the softer the drool should be.

nail polish

This way you can prepare a slime of any color: make it one-color, two-color, three-color.

To cook you will need:

• PVA glue;
• tetraborate;
• nail polish;
• the water.

At the first stage, varnish and glue are mixed. Use the volume of one bottle (the slime will be monochrome) or several, in parts. PVA is kneaded with varnish and the same amount of water is added gradually. At the end, tetraborate is introduced until a homogeneous mass is obtained.

Edible slime

For the manufacture of sweet slimes, chewing candies such as Frutella, Mamba are used. The candies are brought to a liquid state in a bain-marie. Powdered sugar is poured into a container (ratio 1: 2) and melted sweets are added. The mixture is kneaded until it begins to trail behind the bowl.

baking soda

Slime is obtained by mixing Dishwasher detergent and soda. The amount of baking soda depends on the viscosity of the detergent used. In case of overdose of soda (with too dense slime), add a little water to the mass.

Magnetic

An original toy - a slime that reacts to a magnet. To achieve the desired effect, iron oxide powder or iron dust/fine sawdust is introduced into the composition.

Mass composition:

• boron - ½ tsp;
• water - 1¼ glass;
• PVA glue - 30 grams;
• iron oxide;
• dye.

Boron is dissolved in a glass of water. Mix glue, water, dye. The boron solution is poured into the glue mass in a thin stream, constantly stirring. The resulting composition is stretched on a hard surface and an iron component is added.Glue the ends together, mash well. The result is checked by holding a magnet to the slime.

hand cream

Hand cream and flour are the raw materials for making slime. The cream is squeezed into the container, and the flour is added gradually, kneading until completely dissolved.

Look at Also

7 Ways to Make DIY Slime Using Paper and Other Ingredients

With PVA glue

Slime can be made from PVA glueadding a few drops of sodium tetraborate. From the glue (the contents of the bottle), 2 milliliters of brilliant green sodium tetraborate are sequentially added to the plastic bag. The mixture is kneaded until the desired viscosity is obtained, when the slime is well behind the film.

With shower gel

If you add flour to a thick shower gel and mix well, you get a viscous mass that does not stick to the palms. Water-based paints can be used as a colorant.

Toothpaste

Using toothpaste cleanser, you can make slime in 2 ways:

1. The composition, in addition to toothpaste, includes:

• salt;
• shampoo;
• sodium tetraborate.

Mix 3 components, except sodium tetraborate. An activator is dripped into the resulting composition and stirred until it hardens.

2. The toothpaste gel is combined with the PVA bottle with constant stirring. For fragrance, add a few drops of cologne or eau de toilette.

It is necessary to knead until obtaining a homogeneous mass.

snow White

If you mix 250 grams of PVA stationery glue and half a tube of shaving foam in a container, you get a lush white slime. You can replace the PVA with regular paper glue, but in this case the slime will have a yellowish tint.

Unusual use of capsules for washing

PVA and 2 capsules of washing machine gel are mixed in a blender for 5 minutes. Leave for 15 minutes, after which the toy is ready for use. The mixing time can be adjusted depending on the result obtained.

transparent toy

Colorless, similar to liquid glass, slime is obtained by mixing PVA and water: 4:1 (glue: water). After dissolving the water, the viscous mass is kneaded by hand and kept in the freezer for 20 minutes so that it sticks less.

mint slime

The toy will have a slightly minty flavor and color if baby mint toothpaste is used. A bottle of PVA is mixed with a quarter tube of toothpaste. After mixing well, take the slime to the refrigerator for 48 hours.

Steamed slime

A viscous mass is prepared from a thick shower gel. To obtain a one-component slime, the jelly is poured into a container and placed in a boiling water bath for 4-5 minutes. The thickened composition is cooled to room temperature and then placed in the refrigerator for 30 minutes.

Look at Also

15 recipes for making edible slime at home

A piece with a pleasant aroma

As ingredients, a thick cooled shampoo and an infusion of plantain are used. To get the infusion, take a finely chopped leaf and warm water. The infusion should look like a thick, homogeneous porridge. For 30 milliliters of shampoo, take 40 milliliters of plantain. Mix well. The resulting jelly is further cooled.

What to do if nothing works

The reasons why, instead of a slime, a shapeless mass or, conversely, too dense a mass turned out, lie in the violation of the technology of making toys:

1. The quality of the materials used must correspond to the properties and name indicated in the recipe.
2. Respect of the ratio of materials in the mass.
3. Respect of the mixing sequence and duration.

The resulting slime has a homogeneous structure, it easily separates from the walls of the dishes in which it was cooked.

Continue mixing the inhomogeneous mass to the desired consistency. Too sticky product is "processed" with the addition of diluted starch or water. The lack of adhesion means an excess of water, which is compensated by the additional introduction of the main component (according to the recipe): glue, flour.

Rules of care

The toy requires an appropriately sized glass jar with a lid. A little water is poured into the bottom of the container and a pinch of salt is added. This solution will maintain the viscosity of the slime for 1-3 days, depending on absorption into the "body".

The mud is kept under a lid in the refrigerator. Sometimes a disintegration process occurs in the mass: first small bubbles appear, then they accumulate in the central part in the form of a colored spot. The new slime is separated from the parent in a similar container.

The toy should be washed regularly to avoid contamination. Otherwise, the dust adhering to its surface, the dirt will end up on the palms of the child.

Precautionary measures

Do not leave children for a long time and often play with mud. At the end of the entertainment, the child should wash his hands with soap and water, regardless of the composition of the plastic mass.

For babies, use harmless formulations. Safe to swallow Lizuns made from candies and powdered sugar... The rest of the compounds, including those made from flour and gelatin, can lead to gastrointestinal upset.

Tips & Tricks

When making slime, one should not forget about the chemical properties of the ingredients, first of all the activators.Children's skin is sensitive to ingredients such as nail polish, washing gel and baking soda.

Sodium tetraborate is an antifungal and toxic agent. Shampoo, shower gel may contain allergens.