How can you open the washing machine if it is blocked after washing, what to do
Most modern washing machines have a hatch blocking function for loading laundry. It prevents the door from opening during the washing process. However, there are times when the hatch is blocked due to malfunction and people are unable to open the washer. It is necessary to familiarize yourself with how to open the washing machine if it is already locked.
Main reasons
There are several reasons why the washing machine door may be stuck.
Protection if washing is incomplete
The most common cause of blockages is an unfinished wash of dirty laundry. The machines of many manufacturers have a special safety system that fixes the hatch so that it does not accidentally open during the rotation of the drum. Therefore, before trying to open the machine, you need to make sure that it reaches the laundry.
Power outage
Sometimes failures in the safety system of the washing machine appear due to a sudden power failure or voltage fluctuations in the network.The program responsible for the blockage hangs, and therefore, even after the end of the wash, the door does not open.
Appliance malfunction
Another common cause is a washing machine malfunction, caused by various factors.
Program crash
Sometimes the machines have an automatic program failure, which is responsible for opening the locked door. The program stops working properly due to the ingress of moisture on the card or power surges.
Lock block wear
Over time, the locking block begins to wear out and stops working properly. At first it does not manifest itself in any way, only over time the doors will begin to open every other time.
If you do not replace the locking block with a new one in time, the hatch will be blocked.
Clogged drain pipe
Experts advise you to regularly clean the pipe responsible for draining water from the machine. If it is not cleaned, it will begin to clog, which will negatively affect the drainage of fluid. When it is completely clogged, the water stops flowing and the sensor that monitors the liquid level does not allow the door to unlock.
How to open the washer
It is recommended to familiarize yourself with the main features of opening a locked windscreen washer door.
After an emergency stop
Opening the hatch on both horizontal and vertical loading machines has some features that you should be familiar with.
Horizontal loading
Most people use models with horizontal loading of dirty things. Unlocking such washers is carried out in several sequential steps.
To extinguish
First, you need to completely disconnect the washing machine.To do this, you need to urgently stop washing and unplug the power cord. You can only connect the machine to the power source after unlocking the hatch.
Evacuation
After unplugging it from the outlet, you need to clean the machine from the remaining water inside. You will need to disconnect the drain hose from the sewer pipe and place its end in an empty bucket. If the water does not flow, you will need to clean the pipe.
Emergency opening cable
When there is no more water in the drum, you can start opening the door. To do this, pull a special cable on the front panel. If you shoot it, the hatch will open and you can collect the washed items.
If he is not
However, some models are not equipped with such cables. In this case, you will have to manually remove the top panel of the washing machine and tilt it to access the front wall. There is a special latch on it that unlocks the closed door.
Top loading
For machines with a vertical loading method, the doors are unlocked a little differently.
Network disconnection
Sometimes, to unlock the doors of vertical machines, it is enough to unplug the power cable of the device from the socket. For some models, after disconnecting the socket, the latches that block the hatch stop working.
Program reset
If the door does not open due to frozen software, you will need to reset the program yourself. This is done in two ways:
- Thanks to the power button. During washing, you need to press the button responsible for turning on the machine. When washing stops, the button must be pressed again and held for 2-3 seconds. The washer should turn off, drain the water, and unlock the door.
- By a catch.To reset the program, simply unplug the machine and turn it back on after 20-30 seconds.
Manual way
Sometimes software reset does not help and you have to open it manually. In this case, you can use a cable for emergency hatch release or contact a technician.
If the handle breaks
Sometimes the handle of the doors breaks and it is much more difficult to open them. This will require special tools.
Emergency opening cable
Often a cable is used to unlock the washer, which is used to open the door in an emergency. It is located near the filters, at the front of the machine. To open the door, you need to gently pull on the cable.
Thread or rope
A thin piece of string or yarn will help unlock the washer door. To do this, you need a product 10-12 centimeters long and about 5-6 millimeters in diameter. It is carefully dragged into the free space between the hatch and the body, and the latch is pressed.
pliers
Pliers are often used to open the hatch. They can grab a piece of a broken handle and turn it to open the door.
During washing
Sometimes the door is blocked during washing, which makes it more difficult to open.
Samsung
If a Samsung washing machine has blocked the hatch, then you will have to wait for the end of the laundry and try to open it using one of the previously described methods. For people who have never participated in unlocking the hatch before, it is best to call the captain.
Atlantic
Most models of Atlant washers are stuck due to faults in the electronics. Therefore, it is sufficient to simply reset the program.
Electrolux and AEG
These manufacturers took care to unlock the hatches and installed special cables near the doors. Therefore, to open a locked door, it is enough to use a cable.
LG and Beko
Locks rarely fail in Beko and LG washers. However, if the door is locked and cannot be opened, you will need to restart the washing machine or use a cable.
Bosch
On older Bosch models, the retainer often breaks, which leads to the hatch jamming. To unlock the latch you will need to remove the top panel and manually unlock the latch.
"Indesite"
In the equipment of the manufacturer "Indesit" problems with the operation of the hatch may appear due to wear of the lock. Therefore, to fix the problem, you will have to call the wizard to replace it with a new one.
Characteristics of machines of different brands
Different manufacturers have distinctive features that you should familiarize yourself with better.
LG
Features of LG washing machines include multifunctionality and reliability. Therefore, blocking issues are rare.
Samsung
Cars manufactured by Samsung are distinguished by reliability and quality. Among the features of the washers are quiet operation, fast washing of clothes and high-quality hatches. Most often, the doors of Samsung typewriters begin to open badly after 5-8 years of operation.
Indesit
Modern models of washing machines manufactured by Indesit have the following unique technologies:
- Sale Plus. This function is used to save water consumption.
- Energy saving. The technology makes it possible to reduce energy consumption by 2-3 times.
The main drawback of Indesit equipment is the poor quality of hatch locks.
Bosch
Bosch produces cars that have the following characteristics:
- multi-level leak protection;
- save electricity;
- built-in object weighing function;
- automatic hatch opening after washing.
The doors of Bosch washing machines rarely jam, only after many years of operation.
Atlantic
Washers from "Atlant" are very high quality and multifunctional. However, many budget models may have problems with the operation of electronics, due to which the hatch may be blocked.
"Ariston Hotpoint"
Appliances manufactured by Ariston Hotpoint have the following characteristics:
- a variety of washing programs;
- washer build quality;
- multifunctionality;
- the price.
The door assembly is of very high quality and as a result they rarely break.
What you should not do
If the hatch of the washer is jammed, it is contraindicated to open it when the machine is plugged into an outlet. It is also contraindicated to try to open the door by force if there is water in the tank.
When to call the master
When the washer door is stuck, many try to open it on their own. However, if a person is opening it for the first time and has never encountered such a problem before, it is better to use the help of an assistant.
Conclusion
Sometimes the washing machine doors get stuck and cannot be opened. To remove the lock, you need to familiarize yourself in advance with the basic methods of unlocking washing machines.