How to properly disassemble and clean the Xiaomi vacuum robot, steps and tips
Robot vacuum cleaners from leading manufacturers serve as assistants in the house with good operation for many years. Gadgets require constant cleaning and careful maintenance. Neglect of these nuances leads to overheating of the equipment, a reduction in its service life. To extend the operating time of the device, we will consider in more detail the general recommendations on how to clean a Xiaomi robot vacuum cleaner.
How to disassemble to clean?
Caring for a complex technical device does not require much effort, so even an unprepared person can handle it. Before you start cleaning your device, you need to take it apart.
First, disconnect the device from the mains. Remove the lid of the device, remove the waste tray. Then the vacuum cleaner is turned over with the wheels, the bolts are unscrewed and the side brushes are removed. Then unscrew the fasteners of the protective cover. Remove the battery and the brush.
The main thing in the work is to perform all actions carefully so as not to damage the parts. Remove the wheels with the blocks. The last to remove is the element that helps the robot vacuum to rotate. After disassembling the device, they begin to clean the parts.
Cleaning steps and instructions
For Xiaomi robotic vacuum cleaners in a special application you can track the current status of consumables, which, if necessary, need to be changed.
Dust collector and filter
The dust collector is an important design detail. Failure to take care of it can damage the equipment. The removed dust container is washed in soapy water, removing all dirt with a sponge. Rinse element, let dry.
The filter is cleaned with a special brush that comes with the gadget. You can vacuum the room in the traditional way. The filter is thoroughly purged with compressed air to remove debris and dust particles. With daily use of the material, it is advisable to replace it every two months.
turbo brush
The part is clogged with hair, wool, so it needs to be cleaned regularly. The removed element is cleaned using a stiff comb, which must be included with the device. It easily removes hair and hair particles from the surface. The turbo brush is thoroughly cleaned without leaving any debris or dirt behind. If the part cannot be cleaned, it is replaced with a new part.
Side brushes
The side blades require delicate maintenance. Untimely cleaning of consumables can lead to motor failure. The removed elements are cleaned of hair and wool. If necessary, rinse with water, then dry thoroughly. At the fixing point, check that there are no traces of dirt. It is enough to carry out room cleaning activities once or twice a week if there are animals in the house. In the absence of animals, the number of cleanings is 2-3 times a month.
Frame
The drive wheels must be completely clean, since they are responsible for the movement of the gadget.Beforehand, a visual inspection is carried out, the protector is cleaned with a damp cloth. The axles of the wheels are also wiped with a damp cloth. The swivel roller, which is responsible for the direction of movement of the device, is cleaned in the same way.
Sensors
After cleaning all the components, they begin to wipe the sensors. The robot vacuum cleaner moves on the floor, so the elements are constantly covered with dust. The thick layer interferes with the proper functioning of the gadget. The sensors are wiped with a soft, dry, lint-free cloth. It is important that there is no dirt or sand between the fabric and the sensor during maintenance, as this could scratch the surface. Gently wipe the sensitive sensors, without unnecessary pressure.
Rules of operation
Proper maintenance and operation will extend the life of the Xiaomi robot vacuum cleaner. The device begins to work by getting acquainted with the instructions for use of the device. Models differ in design and technical parameters, but the rules of operation are the same for all.
Before you begin, inspect the product for external defects. If found, the gadget should be dropped. If there is none, charge the battery before starting the vacuum cleaner. The gadget is programmed according to the cleaning time and method.
It is forbidden to use the Xiaomi vacuum robot near water, with damaged wires. Before lighting, you must make sure that there are no children and animals in the room. It is not recommended to completely discharge the battery, otherwise it will fail quickly. This requires that the base of the vacuum cleaner is always on.
Observance of safety measures, the rules for the use of the Xiaomi robot vacuum cleaner guarantee the operation of the equipment for the service life set by the manufacturer. High quality cleaning of the rooms will be ensured with appropriate care.