How to properly stick a protective glass on your phone at home

Smartphone owners are often faced with protecting the device screen from damage. The most common method of protection is the installation of special glass. Before installing it, you need to know how to properly stick the protective glass on the phone.

Glass or protective film: which one to choose?

First of all, you need to choose the right glass for your smartphone to protect the screen.

Before choosing, you should familiarize yourself with several recommendations:

• Choosing the type of glass. Today both matte and glossy type glass are sold. Some people install shiny products because they are the cheapest. However, they are not very reliable and are not able to protect the screen from strong shocks.Experts advise to put on frosted glasses, which do not crack, even ambassadors of falls from very high. The disadvantages of this type of product are in particular the fact that they alter the color rendering of the smartphone.
• Choice of coverage. When choosing a screen protector, pay attention to its coverage. It is recommended to choose glasses with an oleophobic coating that is protected from grease.
• Thickness. The strength of the screen coating depends on its thickness and therefore thicker products are chosen to protect the screen. Thin glasses will start cracking with the first drop.

Advantages and disadvantages of protective glass

Bulletproof glass has a number of advantages and disadvantages, which it is best to familiarize yourself with before using it. Among the advantages of such protection are the following:

• Versatility. Many universal bulletproof glasses are produced that are suitable for many models of modern smartphones.
• Ease of use. It seems to many that it is difficult to install protection on a mobile phone, but it is not. Anyone can handle the installation of bulletproof glass.
• Does not affect the image. High quality goggle models do not degrade the image quality of screens. Only cheap frosted glass can degrade the color rendition of the screen.
• Sustainability. With careful use, bulletproof glass lasts more than five years.
• High level of protection. Thick glass protects smartphone screens from chips, scratches and cracks that appear after drops.

Look at Also

Instructions for using glue for the b7000 phone screen, which can be replaced

Bulletproof glasses have a significant drawback, due to which some people refuse to install them - the weight of the product.They make the phone heavier and bulkier.

How to stick the protective layer without bubbles

In order to glue bulletproof glass yourself at home, you need to familiarize yourself with how to do it correctly.

Preparing the workstation

First of all, it is necessary to carry out preliminary preparation of the premises in which the work will be carried out. It is necessary to get rid of the dust so that it does not stick to the protective coating. In this case, it is better to carry out wet cleaning using a spray bottle so that the dust gets wet and falls on the ground. When cleaning, they wipe not only the surface of tables and furniture, but also the floor covering.

We prepare the necessary tools

After they finish cleaning the work area, they begin to prepare the tools that will be used when gluing the glass. In addition to bulletproof glass and a smartphone, you will need:

• Scotch;
• microfiber cloth for wiping the glass surface;
• plastic card;
• alcohol, antiseptic or other solution to degrease the screen.

Degrease the screen surface

In order for the protective coating to adhere reliably, the surface of the smartphone screen is degreased. When degreasing, the napkin is moistened in an antiseptic, after which the screen is gently wiped with it. After that, the wiped surface should not be touched with fingers.

Glass bonding process

To put on the bulletproof glass, its back side is carefully combined with the screen.

Before gluing it, you need to make sure that all the technical holes with the bends match. If everything matches, the glass is placed on the screen and lightly pressed down with a plastic card.

Remove dust particles

Sometimes dust particles fall under bulletproof protective glass.To get rid of it, you will have to lift the glass with tape, dust it off and glue it back on.

Sticker features on some phone models

The process of gluing glasses to a particular smartphone has certain features.

for iphone

Installing glasses on an iPhone is done in several steps:

• clean the screen with an alcohol wipe;
• additional cleaning of the screen from dust residues using adhesive tape;
• protective glass installation;
• surface inspection and dust checking.

Look at Also

Description and purpose of cyanoacrylate adhesive, best manufacturers

On Samsung

Sticking bulletproof goggles on Samsung gear is quite simple. The displays of these smartphones are no different from phones of other manufacturers, and therefore the procedure is carried out according to the standard scheme. First, the screen is cleaned and degreased and only after this protection is installed on it.

About Lenovo

Before putting any protection on Lenovo, you need to understand the phone model. For some types of smartphones from this manufacturer, you need to purchase special glasses. They install the same way as on Samsung or iPhone.

to "Meise"

For each Meizu model, the armored glass is selected individually, depending on the characteristics of the screen and the location of the technical holes. The pasting process is no different from installing a screen protector on other phones.

What problems can arise and how to solve them

When gluing the protective surface, problems may arise that are best dealt with in advance.

What to do if there are still air bubbles

Air bubbles often appear under the glass due to poor adhesion.To get rid of it, you need to carefully squeeze all the air from the surface with a plastic card. You can also re-glue the bulletproof glass.

How to remove the protective glass after an unsuccessful attempt?

Carefully get rid of the glass without damaging the screen, using adhesive tape. To do this, a small piece of tape is glued to one of the edges of the bulletproof glass. Then the tape is carefully lifted together with the bonded glass.

Is it possible to re-glue the protective glass on the phone

Some claim that it is impossible to reinstall the bulletproof glass on a smartphone, because these protective coatings are disposable. High quality screen protector coatings have been reused multiple times. It is better not to glue cheap bulletproof protective glasses a second time, because they do not adhere well to the surface.

Conclusion

Many smartphone owners want to reliably protect their screens from mechanical damage.To do this, special protective glasses are installed on them, which will protect the screen from scratches and chips. Before installing bulletproof glass, you should familiarize yourself with its advantages and bonding characteristics.

Look at Also

Features and types of glue for cork, instructions for use