Features of glue for MDF panels, review of the best manufacturers and instructions for use
Wallcovering is popular for several reasons - no need to level walls, remove wallpaper, paint or any other coating. The finish is practical and simple. The method is economical and clean thanks to consumables, the main of which is glue for MDF panels. There are several varieties of them, so it is worth knowing the main ones before starting repairs.
Special features of the material
Thanks to the glue for MDF, to fix the panels you do not need staples, drills, screws. If the panels are light, then glue is applied to them in a dotted pattern and firmly pressed to the surface. It must be dry and free of grease for the hitch to be secure.
Adhesive for MDF has a number of characteristics:
- great spreadability;
- increased adhesion (sticking);
- heat resistance;
- fast drying.
Adhesive Requirements
Despite the wide variety of adhesives for MDF on the market, they all meet a number of requirements:
- the purpose of the composition has specific purposes - for working with chipboard or for universal use;
- the hitch with any base is strong and reliable;
- resistance to moisture, chemicals, temperature changes - increased;
- strong or super strong adhesion.
There are no frost resistance requirements for MDF glue, as the panels are most often intended for indoor use.
Which glue is right
Despite the wide variety of adhesives for MDF, their main purpose is tight and reliable gluing and adhesion of panels to the wall. All its types are divided into groups:
- universal compounds;
- special;
- polyurethane foam;
- Liquid nails.
MDF Sticker Compounds
Compounds, or polymer resin, contain "Moment", "Titanium" and other additives, thanks to which glue is used on wood, stone and metal surfaces.
A distinctive feature of this glue is its versatility.
Special series
Chemists developed this series for bonding not only to ordinary surfaces, but also to concrete. It can be used by both professional builders and amateurs who decide to do repairs themselves. In addition to glue, a gun is used, the work of which greatly simplifies the gluing of MDF.
The special series includes "Montage", "Macroflex" and others. Their fixing is solid and reliable. It is possible to apply a thin layer of glue economically and remove surface defects with it.
construction foam
Although construction foam is most often used for waterproofing, its use when installing panels is quite possible.Construction foam is produced in two types - for outdoor and indoor use. When fixing MDF panels, it is permissible to use both types of clamps.After drying, polyurethane foam remains flexible. The flexibility avoids the deformation of the MDF. This is especially true if their composition is based on agglomerated materials.
Liquid Nails
Glue is universal, has high adhesion, corrosion resistance, installation of various building materials, especially those containing wood, is possible. Due to its ease of use, the possibility of using liquid nails is very popular. Using a gun, glue application is convenient.
Liquid nails based on organic acid have an unpleasant odor, so personal protective equipment should be used. The glue is durable, but when moisture gets in, the seams can come undone. This must be taken into account when renovating premises where the humidity is higher than normal.
Universal building
The multifunctional glue is applicable not only for gluing MDF, but also for other types of repair work. It is characterized by heat resistance (from -30 ⁰С to + 60 ⁰С), quick setting and moisture resistance.
Review of Effective Brands
Of the above groups of glues, the most popular are several brands with high characteristics. According to the opinions of professionals, when choosing, it is worth giving preference to these brands.
wild titan
Glue belongs to the group of liquid nails and is a universal professional tool. Titan wild successfully replaces fastening with screws, self-tapping screws or nails. The adhesive is able to fix MDF panels to any surface.It is used both indoors and outdoors. Brand benefits include:
- reliable fastening without damaging the structure of the material;
- moisture resistance - 100%;
- profitability of expenditure;
- setting speed;
- the ability to use at different temperatures.
Titebond
The glue is based on aliphatic resin. It is used in the carpentry industry for gluing wooden parts, applying laminate, MDF, chipboard, furniture assembly. Benefits of Titebond glue include:
- quick adjustment;
- availability for work;
- resistant to moisture, heat, solvents;
- ensuring that the strength of the bond boundary is much higher than that of wood.
The glue looks like a viscous yellow emulsion, after drying it is translucent. Frost resistant, ignites at more than 100 ⁰С.
"Moment-1"
Universal glue "Moment-1" is perfect for gluing surfaces made of different materials, is resistant to moisture and can withstand temperatures from -40 ⁰С to +110 ⁰С. The glue dries very quickly thanks to the components it contains:
- rubber resins;
- rosin;
- ethyl acetate;
- acetone;
- hydrocarbons.
Moment-1 glue is a light yellow thick liquid. The optimum temperature for work is from +18 to +25 ⁰С. When fixing the panels, air circulation must be ensured so as not to poison yourself with toxins.
Tytan Euro-Line 601
Glue belongs to the type of universal construction. It is used indoors and outdoors. The base on which the MDF is mounted can be wooden, concrete, brick, plaster.
Tytan Euro-Line 601 glue is rubber-based. With the help of it, they carry out repairs and decoration with MDF panels. The main characteristics are:
- strong and fast adhesion;
- strength;
- cures in 24 hours;
- temperature resistance in the range from -30 to +60
"Crystal of the Moment"
The glue is colorless, transparent, dries quickly and leaves no residue after use. Liquid nails securely fix the MDF panels installed on the ceiling or on the walls inside the premises. Moment Crystal is well suited for bonding panels without top trim.
A feature of this type is that the speed and reliability of setting depends on how hard the surfaces were pressed. Moment Kristall is distinguished by high resistance to frost and moisture.
Makroflex MF220 Heavy Duty
This brand of glue is intended for bonding different materials:
- MDF;
- drywall;
- mousse;
- chipboard;
- metal;
- ceramic;
- drink;
- gypsum.
The form of the glue is a white paste based on polyacrylates. The optimum temperature for fixing is +10 ⁰С and above. Among the features of Makroflex:
- maximum exposure time - 15 minutes;
- lack of smell;
- the possibility of using on the street and inside the house;
- high grip strength.
Liquid Nails LN-910 Panels
This brand of liquid nails is indispensable for quickly covering a room with panels, gluing decorative elements, baseboards, moldings. Adhesion is reliable if brick, concrete, wood, plywood, chipboard and other materials are used as the base.
The adhesive is intended for interior use. It is distinguished by a number of characteristics:
- elasticity;
- the possibility of adjusting the bonding within 15 minutes after connection;
- deformation obstacle;
- long service life (up to 20 years);
- the ability to freeze and thaw.
LN-901 Extra Durable Liquid Nails
The composition is based on synthetic rubber. Able to create the longest lasting connection in harsh conditions.Suitable for indoor and outdoor use. Quickly settle. It can work at temperatures from -40 to + 70 ⁰С. The materials to be bonded are used:
- MDF boards;
- TREE;
- brick;
- floor tile;
- Cork;
- plywood;
- drywall.
The temperature from -40 ° to +70 ° is optimal for operation, from +5 ° to +38 ° - for work.
Work instructions
Knowing some of the secrets of the technology, it is easy to carry out the fastening of MDF parts. There are two main ways:
- use the cash register;
- glue the panels to the prepared base.
Each of the methods has its positive aspects:
- when using the first method, the condition of the walls does not matter;
- metal framing in rooms with high humidity will keep the panels intact longer;
- insulation fits well under the crate;
- the second method is cheaper and easier.
Wall sticking
Before gluing the panels, prepare the wall and proceed according to the plan:
- Old wallpaper, remove dirt, degrease the surface.
- The wall is primed.
- The panels are marked and cut to the required size.
- Apply the adhesive in waves or dots to a panel or wall.
- Gently, but with effort, press down on the MDF to glue them together.
- If necessary, align the joints.
- The seams are filled with putty.
- Let the panels dry.
To close the corners without a groove connection, they are closed with moldings. In this case, the glue is applied to the central part of the corner so that the liquid does not come out. Using foam as a retainer helps level the wall by increasing the adhesive.
Fixing the wall panels
The lathing method is as follows:
- Buy or purchase bars or profiles.
- The first is installed in the most protruding place of the wall.
- Distribute them in increments of about 50 cm.
- Fix the bars to the wall with dowels or self-tapping screws (depending on the wall material).
- Then the panels are mounted using special clamps.
Fixing to a concrete wall
In order for fastening to a concrete wall to be reliable, it is necessary to purchase glue for MDF marked "universal". It should be distinguished by its resistance to moisture, temperature changes and the effects of chemicals. The surface is cleaned, leveled, primed. Glue is applied to MDF and after some time is applied to the concrete wall. Tear for a while (to skate the glue) and finally stick to the wall.In order for the panels to be aligned, it is important to install the first one correctly.
Some features of working with material
You can get a reliable solution if you know a few secrets:
- the surfaces to be bonded must be dry and as flat as possible;
- the adhesive is applied in large dots;
- the coating of the facades must be "tapped" and pressed after gluing;
- excess glue is removed with a napkin soaked in alcohol immediately after it appears on the surface;
- use a spray gun when working with polyurethane foam.
Common Mistakes
Inexperienced craftsmen often try to choose colorless MDF glue for panels, fearing that at the joints it can stand out and give the finish a messy look. This is not entirely true, since the connection of the panels "in the groove" excludes such a possibility. All the glue stays on the back.
If the composition accidentally falls on the front side, you can not wipe it off with a too wet cloth, since the decorative coating may peel off.
When using polyurethane foam, you should pay attention to the coefficient of its shrinkage and choose a brand with a low indicator. The foam is capable of collapsing and failing to set if it does not stand the test of time after application.
Additional tips and tricks
To properly prepare and secure the panels, you must:
- you have to drill or cut the panels upwards;
- it is recommended to cut MDF with a handsaw, a hacksaw for metal, a construction knife;
- glue is applied to the wall in the form of a grid;
- clean the panels from dirt with a soft cloth and soapy water.
The material is easy to install, has an interesting appearance and is able to improve the interior of any room.