How to replace a bearing in a Samsung washing machine with your own hands

Washing machines produced under the Samsung brand are of high build quality. At the same time, due to prolonged operation, mechanical stress or violation of the rules of use, there is a risk of bearing damage. Thinking about the independent replacement of the bearing in the Samsung washing machine, you need to understand the detailed instructions and perform a number of actions step by step.

How to identify a malfunction

It is possible to determine the presence of a bearing break in advance by external signs without dismantling the washer. To be sure that the malfunction is diagnosed correctly, it will be necessary to partially disassemble the equipment case.

Factors that indicate improper operation of the bearing of the washing machine are:

1. Extraneous noise while washing and rinsing clothes. When spinning, it is more difficult to distinguish the unusual noise of the machine, so you should pay attention to operation in other modes.As a rule, as a result of the breakage of the bearings, knocks, grinding, rattling on metal elements are heard.
2. Bad spin. Due to mechanical damage to the bearings, the drum does not spin fast enough, which affects the spinning of the laundry.
3. Visual imbalance. The breakage of the bearings causes the washer to become unbalanced and the washer swings more strongly in different directions. The imbalance will be subtle, so it's important to observe carefully and take into account that the problem is most noticeable when spinning.
4. Violation of the integrity of the cuff. Noticing damage to the edges of the cuff of the machine, it is worth diagnosing the washing machine, since this problem is associated with a broken bearing.

What is necessary

For full diagnostics and subsequent repair or replacement of bearings, you will need to partially disassemble the washer and prepare a set of tools in advance. The required list includes tools for dismantling fasteners, untwisting the tank into two halves and removing failed bearings.

Hammer

To get to the location of the bearing, you need to remove the drum, dividing it into two parts. It is more convenient to dismantle the drum with a hammer, tapping it on the rod.

Set of keys and heads

Inside Samsung washing machines there are several types of fasteners, which use keys and heads to unscrew.

Since fasteners differ in type and size, it's best to have a full set of wrenches and heads on hand.

pliers

When disassembling the washer body, you must disconnect the drain hose to gain access to the bearing. The easiest way to loosen the metal hose clamp is to use pliers.Also, the pliers can be used to loosen some of the machine's fasteners, for example, when nuts are used.

Look at Also

DIY Step-by-Step Instructions for Repairing a Ball Mixer

Chisel or metal rod

A chisel is a metal tool for punching holes. The chisel can also be used when removing the ties and the tank to split it in half. On one side, the chisel is sharpened, and in order to work with the tool, it is necessary to apply impact from the other side. The manual version has a wooden handle that can be struck with a hammer or mallet.

A metal pin can be used as an alternative to the chisel. The tool is a bar of a certain diameter and a certain length. A metal rod can be used not only for chiseling, but also for connecting elements located at a distance from each other.

Slotted and Phillips screwdrivers

Flat slotted screwdrivers are used to unscrew and fasten fasteners that have a flat slot. Tools are metal rods, at one end of which there is a working tip, and at the other end there is a rubberized or plastic handle. Phillips screwdrivers, respectively, are designed for a Phillips slot and differ in design from flat screwdrivers only in the shape of the working tip.

When choosing screwdrivers for disassembling a washing machine, you should pay attention to the width and depth of the working base. From these dimensions it will depend on the size of the fasteners with which the tools can be used. As a rule, the technical parameters are indicated in the names of the models.

Indicator

A liquid level indicator is a special instrument used to measure the level of a liquid.The need for an indicator arises when there is a possibility of internal leakage near the bearings.

adjustable wrench

If you have an adjustable spanner, you can replace a set of spanners with this one because of the possibility of changing the distance between the claws by tightening the nut on the metal body. The tool is suitable for working with elements of different sizes, provided there is free access to the fasteners. There are several types of adjustable wrenches, but the following types are used to disassemble washing machines:

• pliers - due to the special shape of the claws, tools are used to compress and crimp various parts;
• automatic - on them, the opening of the upper base does not need to be adjusted independently, which simplifies work with frequent unscrewing of fasteners of different dimensions.

Look at Also

How to properly glue a plinth to a stretch ceiling, the best methods of fastening

silicone sealant

It is possible to seal the seams on the damaged elements of the washing machine using silicone sealant. The material is irreplaceable when processing seams that are constantly exposed to moisture, as it creates a reliable and tight connection. Silicone sealant has the following properties:

1. Increased elasticity. Due to this quality, silicone is suitable for sealing moving joints. The material compensates for the deformation of the seams and is not damaged by temperature and mechanical stress.
2. Wide operating temperature range. Silicone sealant can be used in extreme temperatures, so washing in hot or too cold water will not affect the strength of the seam.
3. Adherence to various materials. Silicone sealant is used to treat joints on different surfaces, which makes it versatile.

WD-40

WD-40 grease with anticorrosive effect is produced in aerosol cans and is characterized by high penetrating and cleaning ability. The tool has a wide range of applications, including:

• removes residues of adhesive solutions and dirt;
• restores the operation of stuck or jammed parts;
• displaces accumulated liquid and corrodes light rust.

The use of WD-40 is especially important for washing machines that have been in use for a long time. As a result of constant use, internal parts often rust and jam.

How to disassemble with your own hands

In order to avoid serious mistakes, you must follow a certain sequence of actions when dismantling the washing machine. In models of the Samsung brand, the following procedure is assumed:

1. Remove the top cover by unscrewing the fixing screws. The front part is pressed so that it is released from the latches and easily removed.
2. Remove the counterweight located on the top base of the tank. A socket wrench will help cope with this task.
3. The front panel with the control system is moved to the side and the detergent dispenser is removed.
4. Unscrew the screws behind the distributor. It is not necessary to completely disassemble the panel and disconnect the loops, since these elements do not interfere with the work.
5. Dismantle the pipes and other adjacent elements that block access to the tub of the washing machine.
6. Lift the tank slightly and release the retaining springs, then pull the tank completely out of the body.
7. After splitting the tank, they clean the place around the bearings and remove the oil seal first, then knock off the bearings one by one.

Look at Also

Step-by-step instructions on how to quickly disassemble a computer chair with your own hands

Replacement procedure

Bearings removed from the tank are carefully inspected for any mechanical damage. In case of serious defects, it is necessary to replace the element with a new one. Instead of the bearings knocked out with a chisel and a hammer, repairable parts are mounted and the reliability of their fastening is checked.

Reassembly

When disassembling the body of the Samsung washing machine, it is recommended to fix or sketch each step. This will help restore the sequence of work when assembling the device. To assemble the washer, you need to perform the steps in the reverse order, alternately screwing all the internal components.

Review

After installing new bearings in the washing machine, you need to carry out diagnostics in order to check the functionality. The best way to check the bearings is to perform a wash test.

You can run any washing modewithout loading clothes into the drum and observe the condition of the washing machine to make sure that there are no characteristic signs of a malfunction.

Common Mistakes

When trying to replace the bearings of a washing machine yourself, you can make mistakes due to inattentive study of the instructions or lack of experience. The list of common errors includes the following:

• damage to the washer hatch cuff;
• tear out the wire connected to the blocking door sensor and the contacts going to the temperature sensor and the heating element;
• broken fasteners or damaged threads;
• leaving a defect on the pulley when removing it from the axle;
• strong twisting of the clamps, due to which the pipes are torn out.

Some errors lead to improper operation of the washing machine and require significant expenditure to restore the performance of the machine. To avoid such situations, it is worth carefully following the disassembly and assembly instructions. Doubting your own abilities, it is better to entrust the work of replacing the bearings to the specialists of the service center.

Preventative measures

To reduce the risk of damage to the bearings of the washing machine, regular preventive actions can be taken. The most effective measure is to lubricate the bearings with a special grease. To do this, you have to partially disassemble the crankcase, remove the oil seal and the bearing, lubricate the parts and reassemble.

Among the simplest daily preventive measures, it is worth highlighting the use of detergents suitable for the washing machine, careful handling to avoid mechanical damage and control of the absence of overloading of the drum.By devoting a minimum of time to prevention, it will be possible to avoid repairs, which take a lot of effort and money.