20 Best Home Remedies To Get Rid Of Bathroom Rust
Over time, under the influence of water, as a result of intensive use, an unpleasant red plaque will certainly form on the shower trays, the walls of the bathtub. You will need to take technical measures to eliminate this phenomenon. Solutions to the problem are offered from the scientific base to the people. We study how you can get rid of rust in the bathroom at home.
Reasons for the formation of rusty plate
As practice shows, in 90% of cases a yellowish-brown layer of rust forms on the walls of the bath. The reasons are as follows:
- The water. Dissolved metal salts, mechanical impurities contribute to plaque formation.
- Destruction of the enamel layer. Protective coatings, with their promised reliability, do not last forever. As soon as cracks and chips appear, water penetrates under the enamel and begins to interact with the steel base.
- Marriage.And this factor is not excluded. If you do not notice this when buying, installing a bath, then this circumstance will certainly manifest itself.
Normal wear
If the bathtub is not new, if it has been “working” in the sanitary room for more than a year, its enamel will slowly but surely begin to deteriorate. Temperature changes, stress, shock - all this leads to thinning of enamel, rust. In some places (funnel, overflow) it may collapse first.
Therefore, the services of repairers, special kits for restoring the coating of bathtubs, shower cabins are so popular and in demand.
Avoiding destructive factors, even with careful operation, is 100% impossible, this is an indisputable fact.
hard water
It's no secret that the water in our homes is far from perfect - it contains impurities, salts, half of the periodic table. Discussing the operation of the sewage treatment plant and the filtration system does not make sense. When boiling, a characteristic whitish bloom appears on the walls of a kettle or saucepan. And on the walls of the tub there are rust spots, reddish-brown streaks.
Composition of enamel
Chemicals in the enamel layer can affect the appearance and development of a rust film. If there is zirconium, its presence leads to the formation of plaque. Therefore, it is advisable to study the composition of the enamel on the walls of the bath, shower tray at the stage of purchase, installation.
Violation of rules of care
Protective coatings, especially acrylic polymeric coatings, are extremely susceptible to misuse. These are shocks, temperature changes, untimely cleaning (use of abrasives that destroy the enamel).In terms of resistance, the protection is not comparable to the base, steel or cast iron, it has a different composition. It is often more vulnerable to outside influences than the design of the bathtub.
Folk cleaning methods
Among the many methods of getting rid of rust, there are both official tests and popular non-standard ones.Which of them will be the most effective, the consumer decides for himself. Sometimes there is no time or money for expensive funds, their use. And folk - here they are, please, on a shelf in the bathroom or a cupboard in the kitchen.
With hydrogen peroxide
Household peroxide will help cope with rust deposits on metal surfaces, bath enamel. The solution is carefully poured into the bowl, before that the drain is clogged with a stopper and left for some time. Then you need to drain the solution and rinse the bath. It is allowed to enhance the effect of peroxide with brown or ammonia.
Ammonia
Ammonia, a product that comes with first aid kits, will help clean rust deposits from bathroom enamel surfaces. To do this, 100 milliliters of liquid are mixed with 50 milliliters of hydrogen peroxide. The components must be thoroughly mixed, then wipe the problem areas with a cloth, apply the composition with a brush. After 10-15 minutes, rinse with running water.
trisodium phosphate
An effective degreaser, trisodium phosphate, will permanently eliminate rust problems. You will also need hydrogen peroxide. First, the powder (4 full tablespoons) is dissolved in 3 liters of warm water, then peroxide (50 milliliters) is added.The rusty area is covered with the finished composition. After some time (10 minutes), the stains should disappear.
Tartar cream
Tartar, which is used in cooking, contains potassium salt, which is effective against rust. To prepare a cleaning paste, you will need:
- tartar (5 grams);
- hydrogen peroxide (5 milliliters);
- cleaning agent (non-abrasive, 300 grams).
All components are mixed together and then applied to the surface to be treated. The finished dough is not stored for a long time, it should be used as soon as possible.
Vinegar and soda
The combination of table vinegar essence and baking soda gives an amazing effect. It is recommended to enhance the effect by using two types of soda: sodium carbonate and baking soda. They are taken in 40 grams, mixed with about 10 milliliters of vinegar, add 20 milliliters of any liquid bleach.
Rust spots are rubbed with the finished mixture. It is also suitable for cleaning chrome parts of mixer taps, grates and shower pipes from rust.
Vinegar and salt
Among the various folk compositions for removing rust based on vinegar, there is one more - with salt. Coarse salt is not good, especially for acrylic coatings - it will damage them. It is advisable to use apple cider vinegar and not alcohol.
You will need 150 milliliters of vinegar and 40 grams of salt. They are mixed, gently heated in a water bath, without bringing to a boil. The cooled composition treats problem areas. At the end, the residues of reagents and the resulting products are washed with a large amount of water.
Hydrochloric or oxalic acid solution
Acids are effective against fatty deposits and rust deposits.When using hydrochloric acid, safety precautions are taken: they work with gloves, goggles, do not allow aggressive liquids to come into contact with the skin and mucous membranes. Acid is applied to rusty areas with a brush, then, after dissolving the stains, it is washed off with plenty of water.
Oxalic acid is applied similarly, only its effect is softer, you will have to wait longer.
Mustard and turpentine
Mustard is a relatively mild abrasive. On its own, turpentine can be used to dissolve fresh rust stains that it cannot do deep down. Together, they create a versatile rust inhibiting agent. The consistency should be pasty, it is applied to the dirt, kept for 15 minutes, then washed off with warm water.
Table salt and vinegar
Wine vinegar, together with fine table salt, forms a miraculous composition that is indispensable for treating fresh rust. You need about 50 milliliters of vinegar, as well as 20 grams of salt. To ensure that the powder is evenly dissolved, it is recommended to slightly heat the container with the ingredients. It remains to apply the composition cooled to room temperature on the treated areas for 20 minutes, then wash the reaction products.
Lemon juice
The juice extracted from the lemon will help remove stubborn rust stains. The acid included in its composition should help dissolve the brown plaque on the surface of the enamel.
Potato
There are potatoes in every house. With its help, fresh dirt in the bathroom is cleaned. It is enough to cut a medium-sized raw potato into 2 parts, sprinkle it with salt, then rub the rust with the resulting "sponge".It is allowed to repeat the procedure until the surface is cleaned.
Ketchup
Spicy tomato sauce contains acid. Fresh rust stains should be easily removed by action. The method is rather exotic than generally applicable, but in a critical situation it is also suitable.
How to choose an industrial product
The offered industrial samples of household chemicals are ahead of folk remedies in terms of their effectiveness. But their choice depends on the degree of pollution, the material of the bath, the desired effect. It is also important to understand that it is impossible to mix different reagents for cleaning rust with each other, they are used sequentially, separately.
Melting
Cast iron tubs are still used by plumbing manufacturers. In terms of its ability to retain heat, there is no equal to this material. Cast iron is distinguished by its strength, hardness, resistance to abrasion and wear.
Previously, our grandparents used the usual "bleach", which easily removed all stains, deep dirt, returned the bath to its original appearance. Modern remedies are gentler, but no less effective. But the cast iron itself in contact with water, the external environment is "closed" with a layer of enamel - a special glass-like composition. Here all sorts of spots, drops, plaque are formed. Vinegar helps remove rust from such a bath. Or turpentine mustard.
The surface of the baths, made of cast iron and steel, is protected by a special enamel coating. It is she who takes the "hit" on herself - temperature effects, processing with abrasives, hard water with calcium salts. In the baths of the old model, the enamel contains zirconium, which, with all its advantages, is susceptible to the destructive action of corrosion.Under no circumstances should these coatings be cleaned with metal brushes, brushes or aggressive abrasives.
In more modern devices, titanium enamel is used, it is devoid of this drawback. You can try cleaning the rust from the enamel with baking soda and ammonia.
Acrylic
The acrylic coating is the most "delicate", it is extremely easy to damage it with careless use of improperly selected products. It is forbidden to use acidic compounds, abrasives, mechanical cleaners, solutions containing chlorine and ammonia. Only special reagents oriented towards acrylic surfaces. Inexpensive ways to clean rust from an acrylic bath, Cinderella has proven itself.
Review of popular brands
There are many modern products in different price categories: Bass, Timp-pro, Cinderella, Akrilan, Cif, Mister Chister, Sarma, Luxus professional, Cillit, Triton, Panny Bath.
mr chister
Special mild agent for cleaning limescale, rust stains - both bathtubs and plumbing fixtures. Suitable for cleaning acrylic surfaces. After the procedure, a fresh look remains, a pleasant shine remains. The composition also contains special bactericidal additives. Bribes in the tool and its democratic price.
Akrylan
Cleaning the surface of a plastic tub with Acrylan is pure pleasure. The foaming agent is easy to apply, acts quickly, rinses off streak-free and dissolves rust stains. The only condition: you cannot mix Akrilan with other similar compounds. Gloves are used during work.
Low
Liquid reagent for cleaning rust. Recommended for daily cleaning.Convenient packaging and affordable price ensure the popularity of the product among housewives.
Triton Acrylic Cleaner
Suitable for all baths, especially with acrylic surfaces. It does not contain aggressive abrasive and acidic components, it effectively acts on rust without destroying the polymer layer.
surja
Surzha is a universal tool for removing rust, limescale, enamel processing and tiled surfaces. The composition is patented, it includes aluminum oxychloride, silica gel, surfactant, sodium silicate.
Kama
Kama is designed for the maintenance of modern plumbing fixtures, including those with polymer (acrylic) coatings. It is produced in the form of a paste in a polymer package. Effectively removes rust.
Frosch
A liquid product that can be used to remove fresh rust, salt or old stains. The mode of application is simple: apply, maintain, rinse.
Rules of care
The basic rule for the treatment of enamel coatings, bathtubs says: if you periodically clean the surface of rust stains, you can avoid many serious problems. And it is easier to remove them. Just choose the right cleaning product and wash, wipe the tub every time after using it. Then rust on a global scale does not threaten you.