22 best ways to clean cupronickel spoons at home
Many housewives are wondering how to quickly clean cupronickel spoons at home. After all, household appliances made of this beautiful metal can be found in the kitchen of almost every housewife. Cupronickel is a unique alloy of nickel, copper, zinc. Many serving items are coated with this composition. As a result, they look beautiful and dignified, but over time they lose their shine, which requires restoration.
Characteristics of cupronickel
Due to the peculiarities of its composition, cupronickel is often subject to blackening. This alloy is sensitive to high air humidity. Its blackening can lead to improper storage and non-compliance with basic recommendations for the care of such devices. If you do not clean the products from dirt and dark areas in time, the situation will only get worse..
Along with plaque, green spots will begin to appear.The devices will not look very aesthetic, and it is even dangerous to use them. In addition, cupronickel products can “brag” the following advantages:
- they are low cost;
- have a presentable appearance;
- their service life is quite long;
- they are durable and rust resistant.
Cupronickel cutlery care rules
Cupronickel alloy is considered budget, so it is used in cutlery and pantries. But over time, this composition darkens and loses its beautiful shine. The maintenance rules for this coating represent the following process:
- the devices are first submerged in a sink filled with water and detergent;
- only a soft and delicate sponge is used for cleaning;
- to achieve shine, toothpaste is applied;
- after contact with water, forks and spoons should be wiped with a cotton cloth;
- products are wrapped in paper.
Home cleaning methods
Under normal conditions, you can effectively clean devices made of such an interesting alloy. All used components and substances can be found in every housewife. There are already proven methods that really give a positive result and clean cupronickel spoons from external contamination without difficulty.
A soda
Soda scrub is the easiest way to restore the appearance of your products. Fifty grams of ordinary soda is diluted in a liter of warm water.
First, the devices are washed under water using a detergent, then they are rinsed in a prepared soda solution. If after the first stage the contamination has not been removed, these areas can be additionally rubbed with soda powder.And then they need to be rinsed again in cold water, carefully wiped with a towel.
sparkling water
Surprisingly, regular soda can remove dirt from your spoons. The products are simply rinsed thoroughly with sparkling water, after which they are rinsed and polished.
onion juice
To prevent cupronickel from turning black, you need to use onion juice. First, the juice is extracted from the vegetable. Then a cotton ball is moistened in it, with which the spoons are polished.
The products are left for twenty minutes with the onion composition applied, after which they are washed off with water.
Hydrogen peroxide
Hydrogen peroxide can be used to clean the alloy. A cotton swab should be moistened in a three percent solution, wipe the spoons with it. If the stains are old and cannot be removed by this method, then a jar of peroxide should be diluted in a liter of water, where the devices are then lowered. The liquid is placed on the stove and the products are boiled for three hours.
alcohol solution
Cleaning of such products can be carried out by means of an alcohol solution. But it will only help when the darkening is recent and light. The devices are cleaned with a soft cloth previously moistened with alcohol.
So darkened
An alloy such as cupronickel is prone to brown staining. This is his main problem. Also, removing the darkening with an ordinary soap solution will not work. This plate is called patina. Its main cause is not dirt, but the reaction of the alloy to chemical processes.
Causes
The main negative factor affecting cupronickel is humidity. When exposed to moisture, this alloy begins to darken. As a result, ugly and noticeable stains appear on the devices. Other reasons for this reaction include:
- oxidation, which inevitably occurs with the alloy in contact with air;
- poor maintenance of these devices;
- the use of abrasive substances when washing these products.
But you can cope with the problem of darkening if you know some secrets of cleaning.
Cleaning with soda
You can use baking soda to remove the blackness from your devices. Water is poured into a saucepan, three large tablespoons of soda are added to it. The container is placed on the stove. After boiling, the products are sent there for ten minutes. They are removed and washed using a detergent without aggressive substances.
With alcohol
Ammonia has bleaching properties. You need to take two glasses of water and dilute two tablespoons of alcohol in it. Mix the solution well. Then a sponge is moistened in it and the devices should be cleaned with it. With old dirt rub more abundantly, and it is better to choose a brush with soft fibers.
The vinegar
For cleaning, a small spoonful of vinegar should be dissolved in a glass of water. Mix everything well and moisten a piece of material in the resulting solution. They should wipe off all products, then rinse and blot with a towel. Vinegar, in addition to dark stains, is stain resistant.
Chalk
To make a good chalk cleaner, you must first make a soapy solution. To do this, a piece of laundry soap must be diluted in water. Then 50 grams of ground chalk are added to it and more water is added, so that in the end one liter is obtained.
In the prepared solution, the spoons are polished and then wiped dry. Chalk mixed with ammonia will work well.
Egg shell
A shell taken from two eggs will help clean a dark surface of spoons and forks, as well as cope with stubborn stains. It must be boiled in a liter of water to obtain the desired broth. Products are put in it, which are put on fire and boiled for 25 minutes. They are then wiped with an absorbent towel.
Potato decoction
Potato decoction will relieve darkening. First you need to bring it to a boil, then put the devices in it for thirty minutes. Finally, they are placed under running water. And then wiped with a cloth.
Foil
The foil peeling method is considered to be one of the available and effective methods. To do this, place a sheet of aluminum foil in the bottom of any aluminum dish. Put the cutlery in it and fill it with soda solution to the top. The liquid is brought to a boil.
This method, due to the ongoing chemical reaction, allows you to get rid of darkening. The sheet absorbs all impurities. And after such cleaning, the sheet at the bottom darkens, and the instruments shine.
Means for cleaning teeth
Toothpaste is another good remedy to help take care of semi-precious and precious metals. The method itself requires patience. The paste is pressed on a cotton ball, and each product is carefully rubbed with this composition.
Liquid after boiling eggs
Egg broth helps remove dark spots. But in order for such cleaning to bring its result, the eggs must be boiled in water for at least ten minutes. Then the products are placed in this liquid and again brought to a boil. Then the devices are taken out, washed and wiped with a towel.
clove of garlic
First, the envelope should be placed in water and put such a container on medium heat.As soon as it boils, put in it forks, spoons and other products. The duration of this procedure will depend on the degree of browning. As soon as the devices start to shine, they should be removed and rinsed.
Sodium thiosulphate
Sodium thiosulfate is readily available. You can buy it in the pharmacy chain. It does a good job with such a task as cupronickel coated cleaners. A solution is made. To do this, 10 milliliters of sodium thiosulfate must be diluted in 30 milliliters of water.
The devices are first washed in a lukewarm liquid with soapy water. Then, with a cotton swab dipped in a solution, they begin to clean the products.
Hyposulphite
Hyposulphite is used in photography, but it can also be used to clean cupronickel spoons. A solution is prepared from this reagent, with which, using a soft napkin, the products are rubbed. Then they are rinsed.
Pasta broth
The pasta broth will help clean and wash the alloy. Pour water into a saucepan and bring to a boil. Throw the pasta into it, and while it cooks, it must be mixed with the devices themselves. As soon as the pasta is cooked, we put spoons in it for twenty minutes. Then the devices are taken out, washed and dried.
Garlic
Put a few unpeeled garlic cloves in a saucepan and pour water into it. As soon as the liquid boils, spoons, forks and knives are plunged into it. You need to take them out of the water when they become visually clean.
Special means
If it is not possible to prepare special decoctions and powders, ready-made store products can be used.When buying, it is important to first familiarize yourself with the composition of such a drug. It must be free of aggressive and abrasive particles. Chlorine is also a dangerous component. The most popular are tools such as:
- Seth;
- Polymet;
- Fairy;
- Amethyst in emulsion form.
Seth
It is a good spoon cleaner. It does not contain aggressive particles, so it will not damage the surface of the products. Pour water into a small container, and before placing the devices there, they must be rubbed with this product.A little medicine is added to the liquid itself, where the products are placed for half an hour.
Polymet
You can try cleaning any crockery made of cupronickel composition with Polymet. It is released in the form of a creamy paste with which all blackened products are treated. For this, it is best to use a soft sponge. You need to hold the composition for twenty minutes, then rinse.
fairies
Fairey detergent will do a good job with a task such as cleaning cupronickel appliances from the dark and ugly plate. Fill a sink, large container or pot with water and add a sufficient amount of this product. The liquid is mixed and cupronickel spoons are lowered into it for two hours.