How to properly clean an electronic cigarette at home
People often wonder how best to clean their e-cigarette. To achieve good results in this area, it is necessary to choose the right cleaning method. Today there are several options for cleaning - applying chemicals, blowing, burning the spiral. The choice of a specific method depends on the model of the gadget. It is also worth getting acquainted with contraindications.
Basic rules for the maintenance of the device
In order for the gadget to serve for a long time, it is worth providing it with proper care:
- Fluids and other components should only be purchased in specialized stores.
- At the first problems, you need to clean the device. It is also recommended to do so after a specific period of use. Usually, cleaning is carried out after 5-7 thousand puffs.
- Do not add too much liquid.
- If it is necessary to change the taste of smoking, an unscheduled cleaning of the device is carried out.
- It is not recommended to breathe very deeply when using the device.This will cause the heating element to overheat and damage the device.
- The device must remain charged. It is strictly forbidden to use the gadget in the cold. This significantly reduces its lifespan.
- The cartridge should not be used more than 6-7 charges. Then the padding of the element must be replaced.
- Before self-cleaning the device and its elements, you should consult a specialist.
signs for cleaning
The need for cleaning is highlighted by a number of characteristics. If unpleasant symptoms appear, it is recommended to start cleaning immediately.
Reduce the amount of steam
The need for the procedure is evidenced by a decrease in the volume of vapor against the background of a normal volume of liquid and a high battery charge.
burning taste
It is worth cleaning the device when it tastes like burning when vaping.
electronic cigarette overheating
In case of overheating of the device, it is recommended to start cleaning operations immediately.
More effort needed to tighten
Cleaning is necessary when a large clamping force is required.
How to clean properly
To achieve good results when carrying out cleaning procedures, the right method should be chosen.
Operation of the evaporator
To clean the evaporator, you must follow the following recommendations:
- First, the device must be disassembled. For this, the resistance is disconnected from the atomizer. It maintains the required resistance level of the evaporator.
- In the next step, it is recommended to purge all components of the device. With a little pollution, this step becomes the last. It is important to take into account that a certain amount of contamination remains.
- Then it is recommended to rinse the evaporator with warm water and blow again.
- Finally, dry the device for 24 hours.
Cleaning methods
There are several methods for cleaning an e-cigarette. Each of them has certain characteristics.
Purge and rinse
Before you start rinsing the atomizer, you need to remove the wick from the coil and carefully blow through the device. This will help remove any remaining liquid. The procedure is carried out from the part of the contact that is directed to the battery, since a special tank is located in the battery connection area. It helps to collect the remaining liquid and prevent its penetration into the contact group.
After purging, it is worth holding the element under running water for a few minutes. It must go through the evaporator. It is then recommended to purge the device again and dry it. This is done throughout the night. In this case, the contact must be above. After that, it is recommended to purge the device again.
thermal baths
This cleaning method is considered more difficult. It is used for prolonged use of the device without preventive procedures. As a result, the spiral is covered with a layer of carbon. It will not be possible to remove it by ordinary washing.
It is permissible to use Coca-Cola or a vinegar solution to clean the radiator. To prepare it, take 1 tablespoon of 9% vinegar in a glass of water. It is recommended to soak the corn in the solution for several hours or overnight. After that, it is recommended to rinse it, blow it and dry it.
You can also use an ultrasonic cleaner. It is sold in specialty stores. This is the best way to avoid contamination of your gadget.
chemical treatment
If combustion products accumulate on the heater, using water will not yield results. In such a situation, it is better to treat the parts with an alcohol solution. To begin with, it is recommended to disassemble the device into elements. Then clean the steam generator and rinse it in an alcohol solution for 10 minutes. If necessary, the volume of the active ingredient is increased. It is also permissible to use a vinegar solution. In this case, it is recommended to remove the plaque with a cotton swab. It is also allowed to use a soft cloth. After that, the parts are washed, dried and collected.
spiral burn
This manipulation is considered very risky. It should be used exclusively by experienced smokers, as there is a risk of evaporator failure. The essence of manipulation is to heat the coil of corn to red. This procedure completely removes carbon deposits.
Sometimes this method becomes the only possible one. To use it, you need to follow these steps:
- remove the wick and rinse the device under running water;
- purge the device;
- attach the module to the battery;
- turn on the power button for up to 4-5 seconds;
- perform the manipulation 5 to 10 times;
- once the device has cooled, blow it out.
After cleaning, it is recommended to place a new wick in the spiral, moisten with liquid and assemble the device. Then it is allowed to start vaping.
Features of cleaning some models
Cleaning the device directly depends on its model. There are several options to get good results.
Ego-T
It is worth starting to service the device from the battery compartment.It is also recommended to degrease the contacts. Then it is worth separating the mouthpiece, draining the liquid and removing the heater. The next step is to clean the wick, rinse the coil and the tank. The mouthpiece channel should be wiped clean. After drying, the device must be assembled, filled and charged.
Ego-C
This device is very similar to the Ego-T and is compatible with its accessories. Therefore, the features of their cleaning coincide.
ego aio
When cleaning the device, it should be borne in mind that its back cannot be unscrewed or removed. To disassemble this element, it must be removed from the case. It is important to do this with extreme caution to avoid damaging the case.
Evod
Cleaning the device involves a certain sequence of actions.To do this, it is recommended to remove the heating block and remove the remaining liquid. Then you need to remove the silicone seal and detach the top of the atomizer. Then unscrew the heating element with a drill bit and take out the bottom of the converter.
All removed parts should be cleaned with alcohol or chemicals. It is also allowed to use soapy water.
Eleaf
To clean such a device, it is first recommended to unscrew the liquid tank from the atomizer and disconnect it. Then it is worth unscrewing the evaporator and removing the top of the atomizer. Then remove the rubber grommet and push the coil.
If the wick is clogged or slightly burnt, it should be replaced. The condition of the coils of the heating device is not negligible. If carbon deposits are present on them, the parts should be charred. Then assemble the device. This is done in reverse order.
Cartridge and Battery Care Tips
Caring for your gadget is easy. To do this, it is worth doing the following:
- fill with high-quality liquid;
- load on time;
- decarbonate;
- store the device in the factory case;
- protect the e-cigarette from shocks and humidity.
What you should not do
When using and cleaning the device, do not do the following:
- use harsh chemicals and solvents;
- overheating the atomizer or using too high a voltage;
- wash the elements of the device under running water;
- collect dry fragments of the device.
Cleaning an e-cigarette has certain characteristics that you absolutely must take into account. To achieve good results with this procedure, it is important to choose the right cleaning method.