14 Best Methods and Remedies to Remove Epoxy Resin Quickly
Epoxy is a fairly strong product that hardens quickly. And after hardening, it is already difficult to remove it, because it eats away at the base. Most often, mechanical action is used for this purpose, as well as special solvents. Before aggressively washing the epoxy from the surface, you can try to remove the contamination by heating or freezing. It is important to know that it is easier to remove fresh glue that has not yet hardened.
Characteristics of epoxy resin
Reaktoplast has special strength due to its complex structure. The material is in demand in almost all areas of industry.
The synthetic oligomer contains the following substances:
- alabaster, cement, chalk - compact the structure of the mass;
- fine-grained powder - gives lightness;
- cotton, fiberglass - adds viscosity to the substance;
- wood chips - reduces density;
- pyrogenic silicon dioxide - increases the density of the mass;
- graphite - gives a black color.
By combining different resins and hardeners, building materials with increased stiffness and strength can be created.In this case, the substances can have a rubbery or solid structure.
Basic methods for cleaning stains
The choice of epoxy stain removal method depends on the size, age of the stain and the delicacy of the surface material.
Basic heating
A gentle method is to heat the surface with a hair dryer. For this, the maximum temperature is set and the heating unit is driven from side to side for even heating.
Important: This method is only suitable if the base is heat resistant and the high temperature will not damage it.
If the surface has a wooden base, it is recommended to moisten it with acetone before thermal cleaning. This can protect the surface from cracking. After heating, the top layer is carefully removed with a spatula. Then the procedure is repeated and the next layer is cleaned.
Manipulation should be carried out until the base is completely cleaned.
Freezing pollution
The procedure is performed using refrigerant and protective clothing such as goggles, gloves, and a respirator. The room must be well ventilated because the aerosol contains dangerous compounds.
Before carrying out the procedure, the balloon is shaken and evenly sprayed in the required places.
If the coolant is selected correctly, the epoxy will crack, then clean up with a spatula. Manipulations can be performed several times in a row.
Mechanical removal
The aggressive method removes stains by scraping away the resin with the pointed end of the trowel. It is recommended to wipe off stains hardened in this way on a metal or other surface resistant to such a process.
Such manipulation quickly cleans the base, but can scratch it.And in the place of damage there is a risk of corrosion.
chemical solvents
Chemical resistance is one of the main properties of glue. In order to remove stains, aggressive solvents are selected. These include:
- acetone;
- methylbenzene;
- solvent for varnishes and enamels;
- butyl acetate;
- remover.
Some products can spoil the base, so before use you need to familiarize yourself with the composition of the chemical.
Remove the product from the skin
Hardened glue on the skin is removed by washing hands thoroughly with tar or laundry soap. If you can't wash it off, you can use a solvent. To do this, apply it on a cotton ball and gently clean the contaminated area.
You can also use the following methods:
- ice;
- coat with vegetable oil;
- grease with mayonnaise.
After the procedure, the hands are wiped dry and smeared with a protective cream.
Whitening clothes
Resin quickly absorbs into clothing, making it difficult to wash off. However, small damaged areas can be cleaned with the following products.
Alcohols
Take a 10% solution of ammonia or rubbing alcohol and wet the stain. Then leave to react for 5 minutes and gently remove with a spatula.
Turpentine
You can effectively clean your clothes with turpentine. To do this, take in equal proportions:
- mashed potatoes;
- ammonia;
- turpentine.
Apply the mixture to the contaminated area, let it dry completely. Then scrub with a brush and send the item to the washing machine.
Merger
The stain can be removed by heating. To do this, a clean sheet of paper is applied to the stain and ironed with a hot iron.After that, it is gently scraped off with a sharp object.
Stain remover store
Stubborn stains can be removed with professional stain removers. Oxygen bleaches are suitable for white clothes.
Clothes should be soaked in water with bleach and left for 1-1.5 hours. Then you have to wash the item in the washing machine.
Solvents
Solvents are used to remove stains. To do this, soak the stain with a cotton swab soaked in a dissolving liquid. It takes 15-20 minutes for exposure. Then it is wiped with a towel and sent to the wash with conditioner.
It is recommended to dissolve stains in this way on plain clothes.
Soft drinks
You can easily remove stains with drinks such as Coca-Cola, Fanta. To do this, soak the stain with a glass and leave for several hours. The clothes are then washed in the usual way.
Dimexide
You can remove the stain well with medicine. To do this, it is divorced with water in a ratio of one to three. The solution is applied to the stains for 30 minutes and then washed off.
Tile and glass cleaning
There are several ways to remove resin from tile and glass surfaces. If the stains are fresh, they can be removed by wiping with a damp sponge and soapy water. The solidified substance is removed by heating and cooling.
Heating
Soiled areas are heated with a hair dryer until the resin softens. Then it is gently cleaned with a handy tool and wiped with a dry cloth.
Cooling
The resin is effectively cleaned by freezing with refrigerant. It is necessary to walk with an aerosol on contaminated areas. Then the cracked substance is removed with a sharp instrument.
Chemical reaction
You can wipe the resin with acetone, toluene, nail polish remover and other chemicals. First, solvents are applied to the stains, then removed with any detergent. After that, the plate and the glass are wiped with a dry cloth.
You can remove stains with any suitable product. You can also consult experts in hardware stores on the most suitable products for a particular case. During the cleaning process, be sure to observe safety precautions.