Easy ways to quickly remove a sticker from clothes at home
Ordering clothes with a unique pattern, chosen by the buyer himself, is common in many countries. However, unfortunately, in terms of durability, the patterns are far inferior to the fabric itself. Often there is such a situation that the t-shirt looks neat and attractive, and the cracked print over time spoils everything. Let's see how to remove a damaged sticker from clothing without leaving traces on the fabric.
Varieties
Before removing the sticker from the surface of the t-shirt, you must clarify how it was applied to the fabric. Based on this information, you can choose the best removal method that leaves no trace of the outdated print.
To date, the following types of drawings are distinguished:
- thermal stickers;
- thermal printing;
- print Screen;
- vinyl-based applique.
Thermal Stickers
The thermal sticker differs from other prints in the following features:
- the applied image has a solid structure through which the fabric is not visible;
- when creating an image, a wide range of colors is used;
- the image shows smooth transitions from one color to another.
If you can not determine the accessory from the label yourself, pay attention to the label. Sometimes the manufacturer indicates the type of printing applied to it, which makes it easier for the buyer to identify himself.
To note! Iron-on stickers should not be exposed to high temperatures. Be careful when using the iron.
thermal printing
The thermal print is applied to the fabric as follows:
- at the initial stage, the image is transferred to special paper;
- in the future, the paper is glued to the fabric using a heat press;
- due to exposure to high temperatures and pressure, the print adheres firmly to clothing.
The main advantage of this method of application is considered to be the strength of the seam. Thermal printing is difficult to remove from clothing. A distinctive feature of thermal printing is the ability to determine the fabric structure, which is clearly visible through the image.
Print Screen
Screen Printing Features:
- the paint is transferred to the fabric through a special stencil, made personally for a specific pattern;
- the imposition of the print is done in stages, layer by layer;
- the paint adheres strongly to the fabric and withstands a large number of washes.
This method of applying images is used in the production of large quantities of clothing.
Vinyl appliqué
The vinyl based applique is a ready-made image that the buyer can apply to any place by themselves. The app consists of:
- vinyl film;
- adhesive layer;
- image printed on vinyl.
These images are easy to apply and remove, under certain conditions.
Ways to erase at home
Not every owner of a t-shirt has the ability to take it to a dry cleaner or special studio to remove the old, frayed sticker. In this case, they resort to home moving methods, the effectiveness of which has been tested by time. There are the following methods:
- the use of a hair dryer;
- remove the sticker with an iron;
- the use of stationery tape;
- using a clothes dryer;
- chemical solvent treatment;
- exposure to cold;
- removal with detergent;
- using laundry soap.
Each method has nuances in its application, which must be considered separately.
Warm up with an iron
The heat treatment method is excellent for removing heat decals from workwear. Algorithm of actions:
- we study the product label and make sure that the fabric does not melt under the influence of high temperatures. This behavior is typical of polyester fabrics;
- if everything is fine, put the iron on to heat up and prepare a damp towel;
- as soon as the iron has warmed up, put a towel over the image and start heating it with the iron.
To note! If the iron is vinyl-based, place a piece of parchment between it and the towel. This way the design will transfer to the paper rather than the fabric of the napkin.
Use a hair dryer
If there is no iron, a regular hair dryer will help remove the sticker. It is able to create the desired temperature effect, which will begin to soften the layer of glue that connects the print to the fabric. We act as follows:
- turn on the hair dryer;
- bring it as close to the image as possible;
- wait for the sticker to start peeling off the fabric.
The disadvantage of this method is considered to be a low heating rate, due to which a considerable amount of time will have to be spent.
stationery tape
You can use regular tape to remove the emblem from the t-shirt. It needs:
- carefully apply tape to the emblem;
- make sure it fits snugly against the picture and that there are no air bubbles anywhere;
- with a sudden movement, tear off the adhesive tape as well as the sticker.
Advantages of the method:
- removal rate;
- leaves minimal marks on the fabric;
- good for small images.
clothes dryer
The action method drying machine looks like working with a hair dryer or an iron. The only difference is the exposure time required for printing. The dryer cannot heat up the fabric and adhesive quickly. To use this method, you will need:
- set the temperature regulator of the dryer to maximum;
- put clothes on it;
- wait for the glue to soften.
This can take a long time and depends on the capacity of the dryer.
chemical solvents
Chemical solvents are considered effective when it comes to removing unwanted fingerprints quickly and without repercussion. You can buy such substances at any store where there is a household chemical department. Algorithm of actions:
- Gently heat the sticker for a few minutes with a hair dryer, hair dryer or iron;
- turn the thing over so that the pattern with the back side is up;
- a solvent is applied to the image so that it fully impregnates the structure of the fabric;
- remove the sticker and remnants of glue from the fabric;
- we send the thing for washing.
To note! Before using a chemical solvent, make sure it does not alter the structure of the fabric. To do this, apply a small amount of solvent to an inconspicuous area and wait a few minutes.
Cold
Cold is an equally effective heat treatment that removes a troublesome tag from clothing. Cold air forces the adhesive to change structure, altering its adhesive properties.
- set the freezer temperature regulator to minimum;
- place the fabric in it for at least 30 minutes;
- after the specified time has elapsed, the item is removed from the freezer and the embarrassing image is carefully removed.
Detergent
If the previous methods didn't work, try dishwashing detergent. It is less corrosive than chemical solvents and does not degrade tissue structure upon interaction. Necessary:
- apply the product on the inscription or the disturbing impression;
- leave the product to soak in the fabric for several hours;
- place the fabric in the washing machine and wash it thoroughly.
laundry soap
Laundry soap is an economical tool that allows you to remove an old cracked pattern from the surface of a t-shirt. You will need:
- warm water;
- dip the right thing in it;
- lather the print with laundry soap;
- rinse with lukewarm water.
The image is rarely washed off the first time, and in most cases the procedure will have to be repeated again.
How to get rid of a thermal print on fabric
To get rid of thermally printed logos, use:
- ethanol;
- alcohol-based antiseptic liquid.
Ethanol
We moisten a cotton ball with ethyl alcohol and wipe the drawing until it disappears completely. Movements should be light, slippery. No need to rub the cotton ball into the fabric with all your might.
Alcohol-based antiseptic liquid
It is applied similarly, since the principle of its action is similar to that of ethyl alcohol. If you do everything carefully and slowly, the result will not be long in coming.
Features of iron-on sticker removal
Features of removing thermal stickers from the surface of clothing include:
- Verification of fabric response to selected cleaning method. Some of them may damage its structure and the item will have to be discarded.
- Use paper towels to remove any residual glue left from the logo. It is enough to press them inside the t-shirt, then treat its surface with a special agent. The adhesive will separate from the fabric and absorb into the paper.
How to remove an ink drawing or print
The pattern applied to the fabric with paint cannot be removed at home. To do this, you will have to use expensive equipment - it is easier to buy a new product.
Get rid of traces of glue
To remove any traces of glue left on your sweatpants or T-shirt, use:
- Special chemicals used to remove the adhesive layer.
- Wipe off the glue by hand. This method only works if the traces of glue are fresh and have not had time to dry.
- With the help of substances containing alcohol.
- With table vinegar.