How to Get Rid of Mold in the Bathroom, 20 Best Remedies
In rooms with high humidity, fungus often forms. The bathroom is therefore a favorable environment for the development of organic plaque. It is impossible to remove accumulated stains in one procedure. In addition to aesthetic problems, the fungus poses a threat to human health. This can be the cause of the beginning of the destruction of the finishes of the building, plastic, ceramics, glass. Therefore, it is important to know how to permanently get rid of mold in the bathroom.
Causes of mold in the bathroom
The main reason for the appearance of fungal blackheads is dampness, which occurs during frost and poor ventilation.To get them out forever, you need to understand all the factors that affect their formation:
- locate leaks in a water supply well;
- uneven heating;
- weak hood;
- local hypothermia;
- damage to the drainage system;
- cracks in the masonry;
- violation of the tightness of interpanel joints;
- dry used wet towels indoors;
- poor quality of seam sealing;
- do not clean after taking water procedures.
After finding mold and finding out why it's happening, you need to get rid of it. The most correct decision is the timely implementation of preventive work that would prevent the formation of fungus.
The consequences of the appearance of a fungus
Many people are unaware of just how damaging fungal spots caused by humidity can be. The mold that has run its course is eroding the texture of the building to such an extent that major repairs are needed.
The most terrible is the influence of the fungus on the well-being of the owners. He is able to cause such diseases:
- pneumonia;
- bronchitis;
- sinusitis;
- conjunctivitis;
- asthma;
- skin pathologies;
- oncology;
- migraine;
- damage to the central nervous system;
- brain swelling.
If you are constantly in the room and inhale the waste products of the fungus, the gastrointestinal tract is affected. A person vomits, dysbiosis develops, diarrhea, and immunity weakens. Neglected cases lead to cirrhosis and liver cancer.
Mold is a common cause of respiratory disease.
Mold control methods
There are many ways to remove mold stains without leaving a trace. Modern tools can easily and quickly cope with this task.
Antifungal agents
You can eliminate all types of mold with an antiseptic.It is recommended to use organic, oily and water-soluble agents with biodestructors. They are suitable for bathroom treatment due to their relative safety.
Rules for working with antifungal agents
When cleaning the fungus in the bathroom, not only the visible surface is treated, but also the seams of the ceramic plates. Don't forget to wash the plumbing and pipes. When using anti-mold products, you must follow certain rules, since their composition is toxic.
protection
Not only mold stains are dangerous to health, but also antifungal agents. To protect yourself from harmful fumes from an antiseptic, you may need:
- latex gloves;
- spray gun for spraying corners, edges and hard-to-reach places;
- goggles to protect the eyes from the harmful effects of vapours;
- hard brush;
- brush.
If the fungus-infested area is not very large, you can use a scraper. The event begins with the cleaning of the damaged surface. Then everything is treated with an antiseptic and left to dry.
Ventilation
Stagnant air is one of the reasons for the appearance of mold stains. Therefore, it is important to provide normal room ventilation. Old pipes should be cleaned. If this procedure is difficult to perform, you can install a fan.
It is recommended to ensure that moisture does not accumulate in the shower stalls, in the room itself. To do this, leave the doors open, wipe off excess moisture with a dry material.
film on furniture
Cover all furniture before finishing the bathroom. For these purposes, stretch film or polyethylene is suitable. This way the chemicals will not damage the goods.If there are fresh flowers in the room, it is better to transfer them to another place.
Chlorine and ammonia
Chlorine preparations and home remedies are effective. The chlorine element is part of a simple bleach that can kill almost all types of mold.
When using a chemical product, we must not forget that it has limits:
- constant use eats away at the finish;
- porous surfaces are difficult to process;
- has a pungent smell.
Important: the element must not be mixed with ammonia - ammonia. Evaporation due to the reaction of two elements is very dangerous for the human body.
Sprayers
Sprayed products are convenient for contact treatment. In order not to harm your health, you need to work in glasses and gloves. The ball is held from the surface at a distance of 15 to 20 centimeters.
Dampen the surface with water
When you decide to get rid of mold, you should not immediately grab a rag or emery board. The best result will be obtained if all affected areas are well moistened with water. This is to prevent fungal spores from entering the air during cleaning. Otherwise, the mold will find new areas of infection.
Use emery
Sandpaper works well for spot cleaning. In the absence of one, you can use a spatula. Using the tool, the pre-moistened areas are cleaned. After that, it is recommended to treat them with a thick soapy solution or furacilin remedy.
Antiseptic primer
Once all the measures have been taken, the treated areas are covered with an antiseptic primer.The product, which contains substances with fungicidal activity, prevents the formation of new mold stains.
Atlas Mykos
Effective anti-mold with biocidal additives, can quickly remove mold stains and has a preventive protection function.
The product of this brand is suitable for all building substrates. It is used on such surfaces:
- concrete;
- cement;
- monolithic floors;
- seams.
The drug perfectly destroys microorganisms at different stages of development.
Izohan Grzybostop
This is a professional tool that you can use to process the part yourself. It is applied to the surface using a spray gun or brush.
The drug is able to eliminate microorganisms belonging to different classes.To be effective, the product is applied several times. Dry the surface between treatments.
SP 50
The tool is used to remove fungus from plasterboard, wooden surfaces and plaster. Thanks to its innovative composition, it completely destroys microorganisms.
The action begins ten minutes after the treatment. One of the main advantages of the drug is that it is harmless to humans and animals. You can use the product in a closed room.
Hydrocom
The drug is able to saturate the treated surface to a depth of 10 millimeters. The agent is intended for application on plaster, brick, aerated concrete. Once applied, a water-repellent layer is formed, which prevents the formation of new microorganic life.
Snowball
The water-based solution contains excipients that actively fight mold. The product has a strong biocidal effect:
- durable protection of paint coatings;
- disinfection of surfaces;
- deep penetration.
The drug is able to eliminate all types of fungus, mold, moss on the walls, coatings, plaster.
Fungicide
A versatile product with great effectiveness against mildew, it can prevent rotting of wood and other substrates. The product does not damage the color and shine of the surface of tiles and paints and varnishes. Quite effective drug, after the second dose it completely eliminates biocorrosion.
Boramon
An excellent remedy for mildew stains. It does not contain chlorine or heavy metals. Moreover, it does not pollute the atmosphere. Apply a thin layer of antiseptic on all surfaces and leave to act for 24 hours.
If the drug is concentrated, it is diluted with water, according to the attached instructions.
Renogal
One layer of this preparation is enough to destroy biological damage. The advantage of the product is that when processing coatings, it does not impair the strength and does not affect the color of the decorative finish. Does not contain organic solvents.
Folk remedies
Many people get rid of fungal microflora by professional means. But folk methods have also not lost their relevance.
Copper sulfate
Copper sulfate is used to fight organic stains. The antiseptic and antifungal properties of the agent are quite capable of replacing expensive professional drugs.
To prepare a solution based on it, the following products are needed:
- sulfur-copper salt packing;
- 10 liters of water at room temperature;
- a glass of vinegar.
First of all, you need to dilute the solution and prepare the part for processing. Then the protective gear is put on.
Important: the hotter the water, the faster the vitriol dissolves.
The prepared mixture should be poured into a spray bottle or a convenient container. If there is no spray, the prepared product is gently applied with a sponge to the damaged areas.
After the first treatment with the agent, the surfaces are left to dry for 2-3 hours and the procedure is repeated. Accordingly, from 3 to 5 cleanings are carried out, depending on the extent of the lesion of the area.
Bleach
Disinfectant and antiseptic bleach will clean the fungus well and restore its former freshness. The basis of the product is chlorine, so the drug has a good disinfectant effect.
An aggressive agent has a pungent odor, which is in no way good for the respiratory system. It is recommended to work with the antiseptic in protective gloves and a respirator.
To prepare a solution, you need to take 5 glasses of water per 100 grams of whiteness. Everything is mixed and poured into a spray bottle. After applying the medicine, do not wash it off. It will constitute an excellent barrier to the emergence of new microorganisms.
Ammonia
The tool perfectly removes biological corrosion on tiles, glass and smooth surfaces. But not very effective in cleaning porous materials.
When working with an aqueous solution of ammonium hydroxide, care must be taken that the liquid cannot come into contact with the whiteness. The vapors released after combining the two substances are quite toxic and can cause serious damage to health.
To prepare the solution, mix the product with water in equal proportions. Then spray or apply with a sponge over the entire contaminated surface. Leave on for 60 minutes and rinse well. The strong, poisonous odor may cause dizziness, so be careful when handling the solution.
Boura
An inorganic compound is a natural material, so it is harmless to the human body. The substance quite effectively fights fungal infections and acts as an inhibitor of the development of mold on any surface.
A glass of borax should be diluted with two liters of water. Then brush the entire surface with a stiff brush and leave to dry. Do not rinse out the compound. The tool works well with early and already rooted mold.
Hydrogen peroxide
Peroxide is widely known as a powerful antimicrobial, antifungal, and disinfectant. He is able not only to destroy the colony of microscopic fungi, but also to prevent their reappearance.
Unlike other antifungal solutions, peroxide has the following benefits:
- scentless;
- does not emit toxic fumes;
- not toxic.
If a 3% solution is taken, it can be diluted with vinegar to enhance the effect. Then, when the product is poured into the spray bottle, the event can begin. Infected areas may change the color of the liquid, which indicates a reaction to pathogenic microflora.
The vinegar
A weakly acidic chemical that almost every housewife has can quite cope with the fight against microorganisms.
Although it has a very unpleasant smell, it is not as harmful as chlorine or other chemicals. It does not need to be diluted with anything as it is used in its pure form. For treatment, it is enough to apply the agent to a cloth and wipe all damaged surfaces with it. Using a sprayer, you can get to inaccessible places. Then leave to act for 60 minutes for the active action of the product. After that, it is good to rinse everything and wipe dry.
After the procedure, the room is ventilated.
A soda
Baking soda is an excellent cleaning agent and anti-mold agent. The remedy is popular due to the fact that it is safe and has no side effects.
To prepare the mixture, you need to take the following components:
- liquid soap - 1 tsp;
- soda powder - 1 glass;
- you have to take so much water that once diluted, you get a liquid paste;
- a little vinegar.
Apply with a sponge to all bathroom surfaces. Particular attention is paid to the grouting between the tiles, any cracks. After applying the product, you need to walk well with a stiff brush. Then everything is washed off. The procedure should be repeated until all the mold is gone.
laundry soap
The product contains an alkali, which is well resistant to the destruction of pathogenic microflora.
To prepare an antiseptic, you need to grate the soap on a coarse grater. Then take warm water and dissolve a concentrated solution in it. Such a remedy works well if the infection has just started, or for prevention.
A cloth soaked in the prepared solution should be wiped well over all infected areas. If the actions are carried out preventively - on all surfaces of the room:
- sexes;
- walls;
- furniture;
- shower or bath;
- baseboards;
- ceilings.
Important: after processing the room, it is necessary to provide ventilation and normalize the humidity.
Tea tree essential oil
Natural oils are used as antioxidant, antimicrobial and antifungal agents. You can prepare an antiseptic according to different recipes:
- just add a few drops of tea or lemon ether to a glass of warm water, then add water;
- the entire affected area is treated with a prepared spray;
- orange ether with the addition of cloves can treat the entire surface and vaporize the air in the room.
Oil-treated areas do not need to be washed. By remaining on the surface, they prevent the appearance of new fungi.
Grapefruit seed extract
The natural remedy is quite effective in clearing the infection. It completely destroys the pathogenic environment. The protective base is citric acid. The product is good in that it not only kills all bacterial flora, but also eliminates an unpleasant musty smell.
After treatment with the extract, mold will not form on the surface for a long time. To prepare the solution, you need to add 10 drops of the product to a glass of warm water and spray on all areas where mold stains are visible. You can also treat uninfected areas to make sure the whole room is disinfected.
Receptions on different surfaces
Insidious microorganisms blacken the surface over time. Each infected area requires special treatment against fungal microorganisms.
Tile joints
Due to high humidity, mold gradually forms on the coating. If it just appeared, you can use a simple way to destroy it. This will require an antiseptic paste, such as baking soda, and a toothbrush. They rub the seams until they are completely lightened.
In the event that the fungus has already been present in the seams for a long time and has captured large areas, you will need a concentrated solution (vinegar, bleach), a spray bottle and a brush or a sponge. After spraying the product along the seams, brush well on it and leave for 10 minutes. Then everything is washed and wiped with a dry material.
A special primer antifungal mixture is used for cleaning. The seams are well treated until the stains disappear.They are also covered with airtight grout.
Tile
The tile slab is a traditional material for bathroom decoration. As with other surfaces, mold spores form on them due to moisture.
It is recommended to use the following products to clean the surface:
- chlorine-based antiseptic;
- special professional tools designed for this material;
- baking soda;
- hydrogen peroxide;
- borax solution.
Please refer to the specific plate data sheet. Some products may deteriorate when exposed to acids and alkalis. It is recommended to start with a small area to see the reaction of the finish. If no change is observed, you can continue to treat the remaining area.
sealant
Mildew stains on silicone seams are not only ugly, but also harmful. To destroy them, you need to start the procedure with a soapy solution of laundry soap. Then leave to act for a few moments and wipe the treated areas with a dry material.
The next step is to work with whiteness. For this, the solution is diluted and the affected mastic is sprayed. After 20 minutes, all areas are cleaned with a stiff brush. If the case is rather neglected, it is better to replace the putty with a new one.
Ceiling
In a very humid bathroom, fungus appears on the walls, floor and ceiling. Depending on the material with which the ceiling is covered, a gentle treatment is carried out. In order to clean the ceiling with a smooth surface from mold, it is necessary to wash it with a chlorine-containing detergent.
Such home antiseptics have proven themselves:
- the vinegar;
- ammonia;
- hydrogen peroxide;
- baking soda with vinegar;
- tea tree oil and citrus seeds.
If the situation is seriously neglected, only a complete replacement of the finishing material on the ceiling will eliminate microorganisms.
Prophylaxis
Eliminating the fungus is much more difficult than preventing its development. But even after getting rid of it, preventive measures should continue to be followed. This is to prevent the return of mold.
Do not dry clothes in the bathroom
After washing, many housewives dry clothes in the bathroom. This drying increases the humidity in the room. It is recommended to hang the laundry in the fresh air. There it dries, refreshes and does not cause the appearance of mold stains.
Alternatively, you should purchase an electric towel rail. It will not only dry the towels quickly, but also the air.
Ventilation
If there is no ventilation hole or if the hood is blocked, the air circulation stops. This causes an increase in humidity, as a result of which condensation settles, mold spots develop throughout the room.
The solution may be to clean or replace the ventilation ducts. Ventilation is also an effective fungus remedy.
Plumbing
The appearance of microorganisms in the bathroom causes faulty plumbing fixtures. In this case, the leak penetrates the walls, the floor and causes the appearance and spread of mold. It is necessary to eliminate problems with the malfunction of the equipment and regularly check its integrity.
Regular cleaning
The best preventative measure is regular cleaning. With a systematic procedure for cleaning the space, it is easier to notice the appearance of fungal spots. In this case, you can quickly and easily get rid of them.
All surfaces are cleaned.Once a month, hard-to-reach places should be treated with antifungal agents.
Air ionization
Using the ionizer, you can quickly get rid of pathogenic microorganisms and prevent the appearance of new ones. The method is not cheap, but effective. It is used when other methods have failed. Refurbishment and ionization are carried out by professionals.
Pharmacy products
Pharmaceuticals resist biological corrosion as effectively as expensive drugs.
camphor balls
For preventive purposes, insecticides are purchased. To start the action, they are placed in places where the fungus accumulates. This method is the easiest way to remove mold stains.
Anthracene oil
The product obtained as a result of the distillation of coal tar has a pungent and unpleasant odor. It effectively destroys and prevents the development of the fungus. After treatment, the room is well ventilated.
Iodine
An iodine solution provides good prophylaxis against harmful bacteria and microorganisms. For cooking, 10 grams of the product is diluted with 200 grams of water and poured into a small container. The medicinal antiseptic can be kept open on the bathroom shelf. Its vapors will disinfect the room well and clean blackheads.
Mold rot is removed with cleaning agents, which are represented by sprays and solutions. You can use ready-made professional antiseptics and products at home.
To prevent the fungus from bothering, maintain normal room humidity and cleanliness, regularly check the plumbing, ventilation and ventilate the room.