Step-by-step instructions on how to properly assemble a child car seat after washing

Children can only be transported in a car in a special car seat. During operation, the chair gets dirty and needs to be washed. Cleaning requires analysis of the structure, after which many drivers often encounter difficulties and wonder how they can assemble a car seat after washing.

The need to clean

On a child seat, with constant use, dust and lint from clothes settle, food crumbs and stains from drinks, shoe marks and other types of dirt remain.

Even the smallest amount of dirt can cause bacteria to multiply. It is recommended to carry out regular cleaning even in the absence of visible dirt - at least once a month.

The most convenient way to wash a chair in a washing machine is to disassemble.

Car seat assembly instructions

When disassembling the car seat, it is recommended to record or film the process of detaching each part, so that you can then reassemble in the reverse order.If all the details have already been washed and the difficulty has arisen, you should follow the following instructions:

1. Take the seat cover and attach it to the side straps and buckle locations.
2. Pull the cover up and make sure all the pieces are in their grooves, then secure the latches.
3. Put the cover on the backrest and place it on the sides. After tightening, you need to fasten all the buttons.
4. Thread the straps into the bottom grooves and attach the pads to dampen friction.
5. Bring the straps back and insert them into the slots, then secure them to the chair.

Look at Also

The best detergents for washing membrane clothes and the characteristics of care products

Possible problems

After assembling the seat or during the process, various problems may arise. This is especially true for drivers washing a child car seat for the first time. To solve the problems that have arisen and prevent them from happening again, you should find possible errors.

Incorrectly assembled infant car seat

Non-compliance with the rules of the instruction or accidental admission of an error often leads to incorrect assembly of the structure. To fix the problem, you need to completely disassemble the car seat and restart the assembly. For convenience, you can watch a video instruction, which clearly shows the whole process. Using an improperly assembled carrier can result in personal injury and damage to parts.

Inconvenient location of straps

Child seat safety belts must be located strictly at shoulder level... If the belts are uncomfortable for the child, or if they are too tight and do not stay in place, the problem is probably due to poor fastening.It is necessary to check whether the bases of the belts are fixed in the grooves and, if necessary, reattach them.

Discomfort sitting

The inconvenience of finding a child in a car seat is often associated with improper assembly of the structure. If this problem did not arise before washing the seat, you will have to disassemble the baby car seat and reassemble it following the rules of the notice.

The child removes the seat belts

In accordance with safety regulations, seat belts must be securely fastened in the buckled position. If the child can reset the belts on their own, they are probably not properly fastened and too loose.

Deformation of covers

The reasons for the deformation of the covers after washing are the incorrectly selected program on the washing machine or mechanical stress. The deformed cover creates an uncomfortable feeling for the child when in the chair and also increases the risk of injury. It is possible to restore the original state of the covers by smoothing them.

If you cannot remove the warped areas, you will need to purchase new covers. It is not recommended to use the infant car seat without covers, as this will lead to contamination of the interior padding.

Look at Also

What is the best fabric softener, fund rating and selection rules

Stains were not removed well

Stubborn stains from the surface of a child car seat may not be removed the first time. To remove stains, you can wash it again, use a stronger cleaning agent, or have your car seat covered by a professional dry cleaner.

Improper seat attachment

Incorrect fastening of the seat often leads to the breakage of individual seat elements and increases the risk of injury. When attaching the seat, you must check each attachment and follow the instructions.After fixing the structure, you need to make sure that it is secure and correct.

Advice for parents

One of the main criteria when choosing a child car seat is its safety and high quality. In order to use the seat for a long time and not encounter any problems, you should pay attention to the designs of the following manufacturers:

1. Sig. The Russian manufacturer produces comfortable child seats that meet current rules and regulations. All structures are pre-crash and tested.
2. Zlatek. To create the seats, non-toxic hypoallergenic material is used, which is absolutely safe for children. Injection molding technology reduces costs and helps reduce costs.
3. Stiony. The anatomically shaped seats with additional padding ensure safety by absorbing the force of the impact that occurs during collisions.
4. "Baby". This brand produces a wide variety of models for children of different weights and ages. In the production, modern technologies are used, which has a positive effect on the quality of products.
5. "Mishutka". The most economical and affordable option is Mishutka chairs, which are an order of magnitude smaller than most alternatives. Despite their low cost, they meet safety standards and undergo standard tests.