Reasons and what to do if the washing machine jumps during spinning

Many people have a washing machine with which they wash dirty items. Some owners of washing machines are faced with the fact that the machine jumps a lot when spinning. Therefore, it is recommended to familiarize yourself in advance with what to do if the washing machine jumps during spinning.

First steps

If washing is accompanied by increased vibration and shaking of washing equipment, you should try to eliminate this problem. Therefore, it is necessary to familiarize yourself in advance with the first steps that must be taken to eliminate the malfunction.

First you need to turn off the washer and perform a visual inspection. Particular attention is paid to the feet on which the equipment rests. Maybe one of them is broken and needs to be replaced.You also need to make sure the machine is on a flat surface.

Causes and Remedies

There are several reasons why the spinning of the laundry can be accompanied by instability of the washing machine.

An imbalance occurs

In budget product models, an imbalance of the drum for things often appears. This happens for several reasons:

• During the washing process, the laundry gathers into a ball. This is a common problem faced by many housewives. Washed items accumulate in small pieces, creating an imbalance in the drum.
• Exceeding the authorized weight. The tank of any washing machine has weight restrictions, which you should familiarize yourself with. If you overload it with clothes, it will start to unroll unevenly, which will cause strong shaking.
• Excess volume. The drum must not be filled to more than 2/3 of the total volume of the storage compartment.

Shipping bolts not removed

Sometimes vibrations appear the first time you use a new technique. This indicates that the special transport bolts have not been loosened and removed. Many manufacturers install them near the drum to secure it. If they are not removed, the drum will vibrate strongly and its assemblies will wear out quickly.

Look at Also

How to Replace Home Remedies Dishwasher Tablets

Therefore, having purchased a new washing machine, be sure to check whether the transport fasteners are installed in it..

Installation is not level

Some people do not take the installation of purchased equipment seriously and place it just anywhere. However, for washing machines, you should select the most suitable places in the kitchen or bathroom so that the equipment does not vibrate or wobble during the spin cycle.Before proceeding with the installation, it is necessary to check the flatness of the flooring with a level. If a slight slope is found, you will have to look for another place for household appliances or level the floor yourself.

Objects stuck between drum and tub

Some people, even after installing the washer on a flat surface, face the problem of strong vibrations during the process of spinning the washed clothes. One of the causes of jerks is the ingress of foreign bodies into the cavity between the drum and the tub intended for loading laundry. This problem is often encountered by people who do not check their clothes for debris in their pockets before washing them.

To remove stuck objects, you will need to illuminate the drum with a flashlight and carefully remove all foreign debris.

Shock absorbers and shock absorbers

Each washer is equipped with special shock absorbers, which are responsible for reducing the vibrations that appear when the drum rotates strongly. Over the years, shock absorbers with shock absorbers wear out, and the equipment begins to work unstable, knock when using the "Spin" mode. If the shock absorbers start to malfunction, you will need to replace them with new ones. You can do it yourself or with the help of people who repair household appliances.

Engine damage or factory defect

Less often, problems with spinning appear due to a manufacturing defect or failure of the electric motor, which is considered the "heart" of the washing machine. In this case, it is almost impossible to fix the problem on your own, because the faulty motor will have to be replaced.

Therefore, it is recommended to contact the store where the washing machine was purchased or visit the warranty workshop.

The floor is uneven or slippery

The washing machine is often misaligned due to the unevenness of the floor surface. If the slope is low, the technique is moved back only a few centimeters. However, even this is enough for a loud noise to appear during operation. Experts advise rearranging the device to another place with a smoother surface. If this is not possible, you will have to substitute special rubberized mats and running boards under the legs. The rubber material prevents the vehicle from moving and reduces noise levels.

Look at Also

What to do with a squeaky wooden bed, causes and methods to eliminate the noise

Worn springs

Most pucks are equipped with damping springs, which are responsible for capturing vibrations. They are installed under the tank to reduce vibration when unrolling the tank. Gradually, the elasticity of the installed springs decreases, which leads to the vibration of the technique. The springs are not repairable and will therefore need to be replaced. This is the only way to completely eliminate machine loosening during spinning.

Tank material

The stability of the equipment can also be affected by the material from which the tank for loading objects is made. Most devices use stainless steel structures. The advantages of the material include its corrosion resistance, durability and strength. However, models with such drums often skip when the spin is turned on. Therefore, many advise using models equipped with a metal-plastic drum.

Counterweight defects

In all new machines, a special counterweight is installed, which is responsible for the stability of the washer and the damping of all vibrations.

This counterweight block is made from durable plastic and even concrete.Concrete products are short-lived, because due to high humidity they begin to crumble and crumble. Plastic products have poor fasteners, which after 5-7 years of intensive use of technology cease to hold the counterweight. Therefore, if the machine races and wobbles during operation, it is necessary to inspect the fastenings of the counterweight unit and, if necessary, replace them.

worn bearings

Often the machine jumps due to wear of the bearings, which rust over time due to the ingress of liquid on them. At first, there is little or no wear on these parts. A slight creak gradually appears. The vehicle then begins to vibrate and bounce as the tank unrolls. Bearings should be replaced immediately with new ones. If this is not done, they can crumble during operation and damage the working parts of the device.

Main motor and belt

Some models are equipped with motors to which a special belt is attached. The service life of such a strap is 5-6 years, after which it breaks. If the belt breaks, the appliance will not spin properly.

Wooden floor and level

Uneven ground is a common cause of strong shaking. This technique must be installed on a solid and stable base. The ground should be solid and solid. Therefore, many experts advise against placing washing machines on floor surfaces made of planks that sag under heavy loads.

Features of fault elimination

There are recommendations that will help eliminate washing machine breakdowns:

• before starting the repair, you need to determine the exact cause of the malfunction;
• carefully disassemble the device following the step-by-step instructions;
• if a large spring or other parts are worn out, you will need to start replacing them.

Look at Also

How and what to paint the refrigerator with your own hands at home

When to contact a specialist

Many people try to fix household appliances themselves, but sometimes it's best to hire a professional. You cannot repair the washing machine yourself, which is under warranty. Also, specialists should be contacted by people who have not yet disassembled washing machines.

Which models vibrate most often

There are car models that sometimes vibrate more often than others.

Built-in narrow models LG, "Indesit"

Narrow products made by Indesit and LG tend to pop and vibrate. This is due to the compactness of the case, which due to its small size reduces the support part. If the narrow model is not firmly fixed, it will shift in the process.

With metal tanks

It is known that many models of washing machines are equipped with metal tanks. Despite many advantages, they also have a serious drawback - vibration during spinning. Strong vibrations can cause machines to move on the ground.

Small hardware

Some people don't want to use conventional washing machines and buy small appliances instead. It is suitable for small spaces where there is not much free space. These compact washing machines are lightweight so they can bounce when spinning.

Rules for loading laundry

To prevent the washing machine from jumping, load the laundry correctly in the drum:

• delicate items and bedding are washed in special bags or nets;
• before washing, the clothes are carefully checked so that there are no debris in the pockets;
• things that do not fit in the bag are placed in the unfolded drum.

Tips & Tricks

If the machine is shaking, it is necessary to determine the cause of this problem in advance. First, check how well it stands on the ground surface. If it sits flat and doesn't wobble, you'll need to check the integrity of bearings, shocks, springs, and other parts that could break.

Rules of operation of the washing machine

There are several rules for using washing machines:

• do not overload the drum, as this could break it;
• things after washing should be immediately removed from the tank;
• to prevent the formation of scale in the machine, you must regularly rinse it with citric acid.

Conclusion

Sometimes, after turning on the spin, the washers begin to jump and vibrate. To get rid of this problem, you will need to find out the causes of its appearance and the main ways to eliminate it.