How to assemble a computer desk with your own hands, a diagram and step-by-step instructions

The process of assembling furniture, subject to the instructions, will not be particularly difficult. When a question arises about how to assemble a computer desk, you will need to understand the nuances and systematically perform a series of actions.

Steps to follow before assembly

Before you start assembling the furniture, you need to carry out the preparatory measures. Their list includes the following:

1. Familiarization with the instructions. It is recommended to study the instructions thoroughly in order to get a general idea of ​​the work ahead. After reading the step-by-step instructions, you can calculate your strength and, if necessary, involve an assistant in the assembly.
2. Preparation of tools. In order not to be distracted during the workflow, you need to arm yourself with a set of tools in advance. As a rule, assembly requires only a few screwdrivers with various accessories and containers for temporary storage of small parts.
3. Free up space. During the work it will be necessary to connect large parts. Therefore, for convenience, you need to free up space for assembly.
4. Decide on the location of the furniture.The assembled computer desk is rather bulky and heavy, so it is recommended to assemble it directly in the place where it will be located. Having chosen a place in advance, you do not have to transport furniture over a long distance.

How to build according to the instructions

The assembly of the computer desk is carried out according to the attached instructions. By following the instructions exactly, you can avoid common mistakes. The assembly instructions include the following steps:

1. All small parts are arranged in separate containers so that they are not lost. These parts include self-tapping screws, metal plates, screws and dowels. In addition, in the workplace, the rest of the table parts are laid out on the wrong side on a soft surface to prevent scratches.
2. Fastening screws are inserted into the existing recesses on the table parts, placing metal plates under them. Then the parts are connected to each other.
3. Using a screwdriver, firmly tighten the screws in the slots. It is important not to forget to fix the keyboard shelf drawer. Shelf clips are located on the left and right sides of the shelf. After that, mounting brackets are installed on the lower part of the working surface for mounting the side parts. Mounting plates and screws are used to fix the side pieces of the table.
4. The rollers are inserted into the large slots on the keyboard shelf. The slots should match the edges of the shelf. To attach the slides, insert the pegs into the holes provided for them. The shelf is placed on casters and leveled until it is fixed parallel to the surface of the computer desk.After installing all the fastening components, they are tightened with a screwdriver to securely fix all the parts.
5. On the underside of the table, screws are inserted into the grooves. The shelf for the keyboard is inserted on the slides, after which all the places with the fasteners are covered with decorative covers.
6. The assembled computer table is turned over, put on its feet and placed in the chosen place.

Look at Also

Is it possible to iron jeans and how to do it correctly at home

Common Mistakes

When assembling, you need to pay attention to some nuances in order to avoid frequent mistakes. As a result, the service life of the product is reduced and the appearance deteriorates. The main mistake is to try to assemble a computer desk without an assistant, because sometimes the structure must be held simultaneously on both sides.

If the computer desk parts are made of MDF, you must be extremely careful not to use any tools other than screwdrivers. Otherwise, the structure of the material can be easily damaged. When installing the case and drawers, it is important to check the angles so that they are exactly 90 degrees. The table should not be crooked, which can be checked with a level.

Often when assembling they do not pay attention to the tight fit of the hinges, due to which the structure can collapse during operation.

The use of nails instead of self-tapping screws also leads to a decrease in reliability when attaching the rear wall to the case.

Examples and collection schemes

The furniture assembly scheme depends on the specific type of computer desk. The shape of the table top can be simple rectangular, curly, with an arbitrarily curved line or a rounded cut in the central part.Wood, chipboard and plywood are most often used as materials for making tables, but modern structures can be made of other materials, which also affects the assembly process. Some models contain glass, metal and plastic elements.

The classic assembly scheme involves the connection of all parts using fasteners. The basic set consists of a worktop, a shelf for a keyboard, drawers, compartments for a monitor and a central unit. There are also frame structures in the form of a tubular frame with a fixed top.

Features of the corner model assembly

The assembly of the corner version of the computer table begins with the unfolding of all the parts, after which they proceed to the installation of the box. By connecting the lower part to the side walls and the table top, it is possible to give stability to the whole structure. Before proceeding to collect the box, you need to check whether there will be guides on the frame along which the rollers of the sliding elements move. After assembling the frame, proceed to the installation of shelves and drawers.

Look at Also

How and how to replace a mica plate for a microwave oven, maintenance rules

When assembling a corner cabinet model, you need to take into account additional features, which boil down to a few simple rules. Including:

1. Without a rigid attachment to the frame, the entire structure will collapse. Corners should be locked at 90 degrees to ensure reliability.
2. The support partitions must be installed at the same time as the frame. In the absence of partitions, all long horizontal surfaces will sag, which creates risks of deformation.
3. After assembling the structure, you need to check the reliability of all fasteners. Furniture should be firmly in place and not wobble.

Tips & Tricks

Assembling a computer desk requires step-by-step and quiet compliance with the instructions. To perform work, you need to adhere to accuracy and take into account a number of useful tips. Especially:

• decorative plugs to hide the holes are often lost, so it is better to glue them to the surface;
• easily delaminated materials are collected with care, especially using a power tool, as it can be difficult to control the pressure or the drilling speed;
• even if the table stands close to the wall, it is imperative to fix the back of the case, which is an additional element of a secure fixation;
• handles and other accessories are mounted at the final stage of assembly so that the parts do not create inconveniences;
• If there is a protective film on the table parts, it should only be removed after the work is completed.