Instructions on how to properly repair or replace a button on jeans
In most cases, jeans buttons are metal rivets. They come off much less often than classic options. If the rivet is still damaged, a repair problem arises. It will not be possible to cope with it with an ordinary needle and thread. Therefore, many people are interested in how you can fix a button on jeans. To begin with, it is recommended to determine the type of button and choose the appropriate fittings.
Varieties of buttons
To install a rivet in denim, first of all, it is worth determining its type and diameter. Today, several accessory options for such clothes are known. When choosing, the size of the existing loop should be taken into account.
The buttons are different. It all depends on the type of fixing and the stud on which the button rests. The optimal solution for everyday use is considered a button with an aluminum foot. This metal is strong and durable. It is much easier to work with than with steel products.
round cut
Buttons, complete with a rounded notch, are considered a common option.
All metal with a smooth base
There are often all-metal buttons that have a smooth base.
Smooth hollow metal inside
Another popular option is the smooth core. It is often rendered empty.
Installation and replacement methods
Jeans can be riveted in different ways. With this in mind, select the type of bindings. The repair of such elements is also different.
On one steady leg
It is easier to replace such accessories. This type of repair can easily be done on your own. To perform the procedure, it is recommended to do the following:
- To install a button, make a hole in the denim fabric. For this, you can use an awl or a nail. A punch can also be used.
- Place the mounting stud in the hole.
- Drive the so-called button cap into it like driving an ordinary nail. At the same time, you cannot exert much effort. Otherwise, the fittings will be damaged.
On a smooth nail made of solid metal, it is worth installing in the same way. But it is recommended to shorten the product first, as it is usually a little larger than necessary. As a result, this part protrudes above the fixed button.
Rivets
At home, it is easier to install a flat button without a notch. It may have a pin with a circular cut. To perform the procedure, you need to follow these steps:
- Determine and mark the location of the clasp.
- Drill the material in the installation area. It should be done with a nail. You can also use an awl. An equally practical option would be a punch.
- Place the nail in the hole. It is recommended to do this from inside the product.
- Tie a hat with buttons. It must be placed on a hairpin.It is recommended to do this from the front.
- The button will fit properly if the nail goes exactly vertical in the hole.
- Press the hat. The product must rest on a flat and horizontal surface. It is important that the coating is as hard as possible.
- Hit the hat. This must be done with a hammer. It should be hammered firmly into the clasp. It is recommended to ensure that the shot is clear and has the right direction. However, it is not recommended to overdo it. Otherwise, there is a risk of product damage.
Buttons, which differ in a plastic base and do not contain a metal shell, must be installed very carefully. When driving a stud, it is recommended to keep an eye on the alignment. Otherwise, the hairpin will simply split. If you do not want to take a risk, you should refuse to buy such accessories.
On a broken leg
You will not be able to sew on such a button. It is recommended to place it on a solid wooden surface. To do this, you need to use an ordinary or tubular smooth eyelet. During repairs, it is recommended to respect the alignment. However, this is very problematic to do. Therefore, it is worth preparing the bolt and the tube. Its length should be about 10 millimeters.
It is also permitted to use a socket wrench. It is recommended to hammer the rivet in the required place and carefully assess the quality of the installation. To do this, the product is pulled in different directions. After such manipulations, he should not come out.
On a broken leg with a hole
The repair of such accessories has certain features. It must be installed on a solid metal pole. It is advisable to choose an aluminum product.It is allowed to use a tubular metal nail. The procedure is performed on a flat, level surface. It is recommended to pierce the fabric with an awl and install a button. Then hammer it on the nail. If it has a circular notch, it will be much easier to perform the procedure.
Dual mounting
The flat base of the binding is considered a key feature. It must be drilled with 2 studs, which are hardware. After that, thorns protrude from the other side. It is recommended to fold them towards each other. This will help make the task easier and get better results. First of all, it is worth making 2 holes in the denim with an awl.
It is recommended to take into account that when installing the fittings it may turn out that the dowel is too long in relation to the material. To shorten such a product, you need to use pliers.
In the absence of the required skills or tools, it is recommended to contact a professional craftsman. They will be able to install rivets quickly and accurately using special equipment. If you want to install rivets with your own hands, you must first study the technique of the procedure and determine the type of fittings. This will help you get good results.
What to do if there is no spare button
If you do not want to look for a new rivet, and there are no funds to contact professional craftsmen, it is permissible to put an ordinary button instead of special accessories. It is recommended to ensure that it matches the style of the jeans and fits the diameter of the buttonhole.
To perform the procedure, you need to perform the following steps:
- First, it is recommended to remove the old rivet.
- After that, the hole must be darned carefully. After that, there should be no more unsightly holes.
- Sew a button next to it. It is best to use leg fittings.
Sometimes this type of fastener is attached much more securely and looks noticeably more attractive than standard metal rivets.
Additional tips and tricks
Fasteners with a broken shank are often damaged on these garments. These products are constantly exposed to high loads. As a result, they simply fly off the stem. This is considered their main drawback.
To change a rivet, you will first need to get rid of its remnants. Perform the procedure with cutting pliers. It is also allowed to use pliers. It is recommended to remove the remains in one motion. A new rivet can be installed using standard technology.
In this case, it is worth following these recommendations:
- If the fabric is not damaged, you can buy new accessories, after which the button placket is placed in the recess, and the metal cap is attached from above. Then turn the clothes over and lean the hat against the table. The surface must be flat and firm. After that, it is good to hit the rod with a hammer. This will help fix it.
- If the fabric is damaged at the rivet, it is recommended to make a patch first. It is made of denim to close the problem area well. The patch must be sewn manually or with a typewriter. Then it is recommended to install the rivet.
If the rivets do not hold well or are constantly lost, it is worth picking up an ordinary button. This should be done very carefully. The button should match the buttonhole size. Details that are too small will not hold the jeans securely in place, and too large will cause everyday discomfort.
It is quite easy to fasten a button on jeans. However, first of all, it is recommended to determine the type of fittings and choose the best option. After that, you need to choose the type of repair and strictly adhere to the required sequence of actions.