Best to stick the oilcloth on the oilcloth, the choice of means and technology of application

Many people wonder what is the best way to stick the oilcloth on the oilcloth or on the wall. To achieve high-quality and reliable fastening, you need to choose the right adhesive and pay attention to surface preparation. Strict adherence to the technology of applying the substance is not insignificant. To use the coating as long as possible, you need to provide it with proper care.

Peculiarities of film wall decoration

Oilcloth is considered a popular type of coating used to decorate a kitchen or bathroom. Various materials are used for its manufacture. Thanks to this, it is possible to obtain a coating that is durable and highly resistant to mechanical stress. The components that go into the composition of the substance ensure its ecological purity.

The advantages of using oilcloth for wall decoration are:

1. Waterproof. Oilcloth does not absorb liquids, which is why it is often used to decorate the walls of a bathroom or kitchen.
2. Heat resistance. Such material can be used for cladding the kitchen working area. It is suitable as a backsplash cover.
3. Grease and dirt resistant. A regular soap solution will help remove dirt from the film.
4. At low price. Due to the affordable price, you can change the coating quite often.
5. Huge assortment. It helps to choose a finish for any style of interior. It will be a great addition to the bathroom.

The main disadvantage of the material is the risk of mold under the coating. This is due to the fact that oilcloth does not allow air to pass through.

In addition, the material cannot be called high quality. Under the influence of water and fumes, it will quickly lose its appearance. This is due to the fact that the paints wear out gradually.

To get a high-quality coating, it is worth choosing the right oilcloth. First of all, it is recommended to decide on its texture. It can be matte or shiny. In addition, the following characteristics must be taken into account:

• quality;
• appearance;
• the structure of the surfaces to be bonded. For uneven walls, you need to choose an oilcloth with an ornament, which will help hide all the flaws.

Look at Also

How to assemble a computer desk with your own hands, a diagram and step-by-step instructions

What is necessary

To glue the film, you need to choose the right tools. The necessary devices are:

1. Cutter. This device is necessary for cutting individual sheets of film, which will then be attached to the walls.
2. Pencil or pen. With their help, it is possible to mark the walls.
3. Roulette or ruler. These tools are also used for markup.
4. Industrial dryer. This device is used to treat the surface of the film with hot air or to warm the area of ​​​​localization of bubbles, which necessarily appear when fixing the material.
5. Raclette or spatula. These tools are needed to smooth the film.Thanks to this, it will be possible to evenly press the material against the wall.

Of not insignificant importance is the preparation of the adhesive composition. The following substances are usually used to fix the film on the wall:

1. bustilat. The product is suitable for renovation and finishing work. It is made from synthetic materials. The substance is a thick white composition. It contains biocidal additives that prevent the development of fungus and mold. The product is considered environmentally friendly and does not contain harmful components. After drying, the adhesive forms a transparent, high-strength joint. It is characterized by high adhesion parameters.
2. PVA White House. It is a building and household substance suitable for attaching decorative oilcloths. They are also glued to leather, wood and cardboard. The composition is often used for laying linoleum. When drying, the substance acquires a transparent consistency, which makes the seams invisible. The composition is a homogeneous consistency, which is characterized by a white or yellow tint. The substance is very elastic and does not contain harmful substances.

How to do collage work

First of all, it is worth calculating the required amount of material. For this, it is recommended to measure the dimensions of the room. Then you need to properly prepare the surface.

Surface preparation

To calculate the required amount of material, it is worth determining the length, height and width of the room or a certain part of it on which it is planned to carry out repairs. If the film is covered with an ornament, it is important to take a certain amount of material - about 10%. This will later adjust the pattern. The quality of the repair depends on its preparation.Therefore, it is so important to properly remove the old coating and clean the walls from dust and dirt. It is best to clean the surface with a solution of water and baking soda. After that, it is recommended to dry the coating well.

Look at Also

Better to glue plaster figures, do-it-yourself restoration tools and rulers

Then you can start repair work. The correct choice of glue is also important. To fix the film, it is allowed to use PVA or Bustilat. These substances are mixed with water. Therefore, they do not leave stains after drying. It is important to take into account that only fresh formulations should be used to fix the film.

Procedure

To stick the oilcloth, you need to follow these steps:

1. Prepare the adhesive properly. In this case, it is recommended to follow the instructions. The material should be cut into strips that match the pattern.
2. The glue is applied evenly to the oilcloth. It is recommended to do this with a brush or roller. If the substance is misused, there is a risk of blistering.
3. The resulting strip should be glued to the wall. It is pressed from the central part to the edges and smoothed. This helps remove excess air.
4. Each following canvas is fixed on the previous overlap. This will help you achieve an even pattern.
5. To stick the oilcloth on the whitewash, the wall must first be covered with glue. Otherwise, the lime will move away from the plaster, which will have negative consequences.
6. They begin to stick to the part from the corner. There is a problem fixing the seals. Therefore, strips of paper impregnated with wallpaper glue are applied to them. After the coating dries, they are moistened and removed. The upper part of the cover must be fixed with a border.
7. If bubbles appear during work, they are carefully cut out and smoothed.

Equipment maintenance rules

After the repair is completed, the resulting surface should be washed with soap and water and dried. In a similar manner, the oilcloth is cleaned of any contamination during use.

It is strictly forbidden to use the usual detergents containing acids or alkalis. Otherwise, the film will quickly lose its attractive appearance.

It should be remembered that the oilcloth loses its color over time. To maintain the original appearance of the coating, it should be periodically wiped with a solution of vinegar and milk.

Features of oilcloth collage on oilcloth

It is allowed to glue the old coating with oilcloth. However, before performing the procedure, the surfaces must be thoroughly cleaned of dust and dirt. In addition, the coating must be degreased. For this purpose, water with any detergent composition is suitable. It is advisable to level the surface so that defects are not visible.To avoid the divergence of the coating, the material is fixed with an overlap. At the joints, the film is treated with glue and smoothed with a roller. Remove excess material with a clean cloth.

Look at Also

How to choose the right size toilet seat, criteria for buying a seat

Additional tips and tricks

To achieve good results in the use of the substance, you should follow these recommendations:

1. Before attaching the film, the surfaces must be thoroughly cleaned. In the case of using a self-adhesive coating, the wall must be degreased. Hot soapy water is good for this.
2. When applying a coating to a whitewashed wall, it must be treated with glue. Otherwise, the oilcloth will fall off with the plaster.In the absence of a roller, it is allowed to smooth the coating with an ordinary gauze.
3. Apply adhesive evenly. This will help prevent voids from forming. If bubbles appear, the swollen area should be cut and smoothed.
4. Before gluing the coating, it should be treated with a primer. The corners of the walls and the ceiling are trimmed with a border.

For oilcloth, you can use different substances. However, the most effective formulations are PVA and Bustilat. To achieve good results in their application, the composition must be applied correctly.