How can you soften the slime if it has become hard, what if the slime does not stretch but breaks
There are many ways to soften your slime. The mass becomes hard and loses its elasticity due to improper storage or due to the expiration date. Simple and accessible components will restore the anti-stress to its former properties. To prevent the problem from happening again, you need to play around with the slime properly and choose the most suitable storage location.
Why is it necessary
Over time, slime loses its elasticity and dries out. During the game, it tears, stretches poorly or sticks to the hands. To restore the original shape to their favorite toy, they use various means and methods.
Basic methods
It is possible to restore the softness, elasticity and viscosity of the gelatinous mass in several ways.
Exposure to heat
Sometimes to restore a favorite toy, it is enough to warm up the mass.
Structural change
Due to exposure to high temperatures, the mud will soften the mass. The structure becomes viscous and elastic again. All activities must be performed under adult supervision.
With boiling water
It will be possible to dilute the anti-stress in a simple and proven way:
- 145 ml of boiling water is poured into the container;
- immerse the composition in hot water and leave for 8 minutes, covered with a lid;
- then they take it in hand and begin to actively knead it, without waiting for the mass to cool.
This recipe is suitable for restoring a composition that has not completely dried out.
In the microwave
A simple way to thicken the mass can be applied to both purchased and homemade slime:
- the toy is placed in a container;
- pour 6 ml of boiling water;
- put the container in the microwave for 36 seconds;
- after that, the piece should be well kneaded.
Without using heat
It will be possible to correct the situation with the spoiled toy without affecting the heat mass. In this case, additional components are used.
Boric acid
Boric acid will help thin the frozen mass of the toy. The solution can be purchased at any pharmacy.
- 47 ml of boiling water is poured into a deep container;
- squeeze a pea of toothpaste;
- the components are mixed until a mass with bubbles forms;
- dip the slurry into the finished solution and start mixing;
- first, the mass sticks to the walls, gradually, when shaking, it turns into an elastic mass;
- add 14 ml of boric acid and continue to stir.
Shower gel
If the anti-stress has lost its elasticity, stopped stretching and started to dry out, the shower gel will help:
- 98 ml of boiling water is poured into a bowl;
- pour 9 ml of shower gel with a thick consistency;
- the components are well mixed;
- slime is immersed in a solution and begins to knead with hands until the mass becomes soft;
- then the toy is placed on a towel to glaze the excess liquid;
- 4 ml of boric acid are injected so that the slime does not stick to the skin of the hands.
Dilution with lotion
For a slime to stretch well, it must be elastic. If the composition has hardened, a body lotion will help. Plus, the lotion helps expand the toy to its original size. It is enough to pour 9 ml of product on the surface of the slime and knead the mass. After a few minutes, the structure of the toy will be restored.
Adding body cream
A body cream with a more runny consistency will help revive a do-it-yourself drool at home. 18 ml of product is squeezed into the container, 6 ml of water is poured in and the piece is immersed in the solution. After 4 minutes, the piece is picked up and kneaded. Beforehand, the hands are also lubricated with cream.
Using polish remover
If the slime is dry, not stretching or breaking, you should try nail polish remover. 2.5 ml of the solution are poured onto the surface of the mud, after which the mass is thoroughly kneaded. Then add a small amount of shaving foam and knead again with your fingers.
How to save with shaving foam
Shaving foam will help save the homemade toy. Several zips are made on the sticky mass. Then knead carefully with your fingers for three minutes. The toy will not only become soft, but will increase in volume.If the mass is too sticky on the skin, you need to add a small amount of boric acid.
Toothpaste and "Panthenol"
A recipe using toothpaste is effective:
- 2 g of toothpaste are squeezed onto the surface of the slime;
- gently knead the mud;
- then take the "Panthenol" agent in the form of a spray and make two zips per lump, continue to knead;
- after 9 minutes, the slime acquires the desired shape and structure.
Antibacterial gel
Another proven and effective method of softening mud is to use an antibacterial gel. Put a piece of slime in a bowl, add a few drops of antibacterial gel and stir well with a spoon. Then the slime is taken in hand and actively kneaded until it becomes elastic.
Vegetable oil
Any type of refined vegetable oil is suitable, for example, linseed, sunflower, olive. A few drops of oil are enough to modify the composition of the slime.
PVA glue
This component is ideal for restoring homemade slime. With PVA glue it will be possible to dilute the purchased toy. Do not overdo it with the component, otherwise the composition will stick to your hands.
The toy is placed in a waterproof plastic bag, a small amount of PVA glue is added. Then the bag is tied and the contents are mixed until smooth.
What to do if the slime is dry
To restore all the original properties of the toy, you need to choose the right product. For a slime in a jar and for a ninja slime, sometimes the same methods do not work.
The water
Any type of slime can be softened with water. If the slime has hardened, it should be put in a container, pour water at room temperature into it and knead well. The water will help increase the mass in size. Water is poured into the container and immersed in the antistress for 16 minutes.Stir the composition with a wooden stick and add a thickener to restore ductility and elasticity.
Antibacterial gel
The gel is suitable for any type of slime. The tool is used not only when the mass has hardened. It is advisable to regularly apply the antibacterial composition, since the surface of the mud accumulates many pathogenic microorganisms. The use of gel for disinfection involves the addition of 4 drops. When you need to soften the mass, just pour two drops on the surface of the slime. Then carefully knead the mass with your fingers.
hand lotion
This tool is not suitable for viscous jelly. In all other cases, the lotion will help to cope with the problem that has arisen:
- Homemade or purchased slime is spread and made into a cake.
- A small amount of lotion is evenly distributed over the entire surface and to the left.
- After 7 minutes, the sludge is picked up and actively kneaded. If the mass has not hardened too much, the waiting time is reduced to 1-2 minutes.
Hand cream
It is better to use the cream if the slime has a dense structure. Hands generously spread the selected cream, take a mud and actively begin to knead it until it becomes soft enough.
lemon acid
The citric acid will help give any type of slime the desired consistency. A small pinch of citric acid is poured over the surface of the mud and then thoroughly kneaded.
Do not add too much powder, otherwise the mass will become sticky and lose all its properties.
Glycerol
Glycerin will help restore the shape and consistency of any type of stress reliever. The component is sold in any pharmacy at low prices. A few drops of glycerin are added to the container and mixed.Then the slime is taken in hand to knead the mass.
Toothpaste
It will be possible to restore the softness of the slime with the help of toothpaste. A pea is squeezed onto the mass and mixed. The paste can change the structure of the slime, so it is recommended to try the product on a small piece beforehand.
Microwave
The microwave oven will help restore the original appearance of the dried mud:
- antistress is transferred to a deep container;
- pour 7 ml of water;
- the container is placed in the microwave and the heating mode is activated for 9 seconds;
- let the slime cool, then start stirring;
- if the slime has become sticky and too runny, you need to add a thickener.
What can be done from a hardened product
If all the proposed methods for restoring the structure and shape of the slime did not help, do not rush to throw it away. Many useful things can be made from solid mass.
slime filler
If the slime has become dry and hard, it should be crumbled and added to the soft mass of new slime. Each piece should be rounded. As a result, you get a stress reliever with an unusual decorative element that is pleasant to the touch.
space bottle
If the mud has hardened, but looks clean and beautiful, it is placed in a transparent glass container. To give a beautiful effect, sequins, sequins, beads are added to the jar. The finished composition will adorn any interior.
Bouncing ball
When the slime is not completely dry and wrinkles a bit, it is easy to make a bouncy ball out of it. Several balls of different sizes are rolled from the mud and left in the open to freeze the mass. It looks beautiful if you mix several balls of different colors.
Prophylaxis
If you follow preventive measures, the mud will retain its elasticity, softness and ductility for a long time.
Addition of a thickener
Any thickener should be added to the mass in a few drops. To make the slime softer, 3 drops of thickener is enough, after which the mass should be thoroughly kneaded for 4 minutes. After that, if necessary, the procedure is repeated.
Home storage rules
Store slime in a tightly closed container with a lid. The jar is kept in a cool, dark place away from heaters.
If the container does not close tightly and air gets inside, the mass will soon dry out.
What cannot be "fed"
You should not add starch, flour and other similar products to the viscous mass. They shorten the life of slime and promote the appearance of pathogenic microorganisms.
The right choice when buying
When buying slime, you need to pay special attention to the date of manufacture of the product and the storage conditions in the store. It is better to buy anti-stress in large retail stores, where there is more guarantee that the product is of high quality. Purchased slime, subject to conditions, is stored longer.
What to do if the slime does not stretch, but tears
There are several reasons why the slime has stopped stretching and breaks during play:
- malfunction ;
- the expiration date has expired;
- non-compliance with the proportions of certain components;
- an excessive amount of active ingredients.
The situation can be corrected in the following ways:
- citric acid helps, which is added in several grains, after which the mass is actively kneaded;
- so that the slime stretches well, add grain-free toothpaste;
- gel or body lotion helps, the selected agent is introduced into the slime in small portions and kneaded;
- shaving foam helps keep the structure airy and soft;
- antibacterial gel will help make the mass elastic;
- a small amount of PVA glue is added to a homemade toy.
If the slime is dry and torn during the game due to an overabundance of certain components, the following recipes will help:
- Boiling water is poured into the container and the mud is immersed in it for a few minutes. Then the mass is removed and kneaded with fingers for three minutes.
- The microwave will help correct the situation. The slime is heated in the microwave for 8 seconds and then kneaded by hand.
Tips & Tricks
In order for the ninja slime to retain all its properties for a long time and not deteriorate, the rules of storage and operation must be observed:
- store the mud in a container with an airtight lid, in a cool, dark place;
- it is not recommended to play with slime for too long;
- rare clearance also leads to drying out of the mass and loss of elasticity;
- you can not leave the mud in the fresh air for a long time;
- citric acid will help make transparent slime elastic;
- the composition should be fed once a week and only with permitted ingredients.
To preserve all the original properties of the new slime, you should follow preventive measures:
- For self-production of slime you need to choose only working recipes. It is good if a video is attached to the instructions, where each stage of work is described in detail. Be sure to read the reviews.
- Do not place a container with slime on heaters. Prolonged exposure to the sun also negatively affects the shape and structure of slime.
- It is best to store the toy in the refrigerator, but it should not be placed in the freezer.
- When making a slime, you must adhere to the exact proportions indicated in the instructions. The lack or excess of components leads to the fact that the composition sticks to the hands, does not show ductility and breaks.
- The mass should be regularly cleaned of dirt and dust. Large particles are removed with tweezers, and dust particles are washed off with running water.
- It is advisable to buy slime in large stores. In this case, there is no longer any guarantee of buying a quality product.
When buying, be sure to check the production time of the product and study the composition of the mud. The quality of the goods is also affected by the conditions under which the mud is kept in the store.