Reasons why the washing machine may not spin and what to do
A malfunction of the spin function in the washing machine leads to inconvenience during daily use. The washing machine may not spin the laundry due to an internal failure or incorrect operation.
How to understand
Equipment malfunction can be detected by various indications. Most causes of failure are associated with improper operation of the drain pump.
The drain function does not work
Faced with a breakdown, you must ensure that the water drawn from the interior is completely drained. If there is liquid in the drum, the machine does not start spinning the laundry.This problem occurs periodically on all types of machines, including Samsung and other common models.
Things in the drum are quite wet
If the washing machine has finished its work and the items in the drum remain too wet, there is a high probability that the wash has finished without having activated the spin cycle. In this case, it is worth diagnosing the equipment.
Noisy drain
If operation is noisy, check the condition of the drain filter. To do this, remove the panel held by latches, remove the filter and examine it carefully. Visually detected blockages are manually removed and then the item is washed. The cleaned filter is returned to its original position and its functionality is checked.
things don't grow
When the washing is not finished and the clothes are not spun, the use of the machine becomes uncomfortable. Despite the possibility of continued operation, it is better to carry out repairs.
Works half the time
The periodic non-operation of the rotation is a clear sign of a malfunction. To eliminate the breakdown, you will need to find the exact cause and eliminate the detected defect.
The machine hums, but does not spin
If the machine makes noise but does not perform the spin function, you need to check if the correct mode is activated. If the spin is activated, but does not work, you will need to find out the cause of the breakdown.
Slow drain
If the machine evacuates the water badly and slowly, the spinning is unstable. Complete drainage of liquid during normal operation takes no more than a few minutes.
Bad reasons for rotation
Having discovered a malfunction, it is necessary to understand the reasons for its occurrence.Subsequent repairs depend on the identified cause.
Wrong washing program
Modern typewriters from LG and many other manufacturers have the option of choosing one of many programs. The main modes are: soft wash, wool, silk. Before using for the first time, it is recommended to read the attached instructions and study all available programs. In some modes, spin is not provided, so you can start this function separately or initially select a different program.
Drum overload
If the drum overload detection function is not available, a malfunction may be caused by too much pressure from heavy laundry. In such a situation, when the spin starts, the machine begins to spin the drum, but even after repeated attempts it fails and the washing machine goes into stop mode.
balance of things
Items in the drum should be evenly distributed to allow free rotation. If the machine is not equipped with an imbalance detection function and does not spin the laundry, it is enough to distribute the clothes carefully so that no lumps form, then restart.
Drain pump malfunction
Before starting the spin function, the machine completely drains the water collected in the tank. During the spinning process, water is also drained, which comes out of the soaked things. One of the reasons why water remains inside the drum is a malfunction of the drain pump. This problem is often encountered in equipment from the manufacturer Beko.
Pressure switch failure
The pressure switch functions as a water level meter.The element is used to send an electrical signal to the controller about the absence or presence of liquid in the tank for the subsequent implementation of the actions specified by the washing program. When water enters the drum, the pressure in the chamber and the pressure switch tube increases. After reaching the set water level in the tank, the mechanism switches. A malfunction of the pressure switch leads to a disturbance in the transmission of control signals to the rest of the actuators. This failure is typical of Ariston equipment.
Electronic module malfunction
The control module is one of the main elements of the washing machine. The mechanism is responsible for monitoring the execution of a given program, receives signals from sensors and transmits them to the execution elements. If the control module fails, the correct operation of the machine is disturbed and repair or replacement is necessary. In this case, it is extremely difficult to diagnose and eliminate the defect on your own, so you will have to seek professional help.
electric motor
Prolonged use of the built-in motor will wear out the brushes, which will slow down performance. As a result, the motor is unable to develop the number of revolutions required for spinning. To access the motor, you will need to disassemble the housing, disconnect the belt and wires, then unscrew and remove the part. After removing the engine, you can check the performance of its individual elements and replace broken parts with serviceable ones.
Tachometer
Constant overloading of the drum with objects leads to the fact that the machine operates at the maximum allowable capacities.Extreme loads cause malfunction of the tachometer sensor, which is used to monitor the number of revolutions performed. Due to the tachometer failure, the internal mechanisms set the spin speed incorrectly.
The reason for the malfunction of the tachometer may also be the weakening of its latches or a violation of the wiring and contacts.
To find out the cause of the breakdown, it is necessary to check the condition of the fastener and, if necessary, tighten it. Next, you need to check the integrity of the wiring and contacts. Having found faults, you need to strip and insulate the wires. If the sensor itself is faulty, it will need to be replaced.
What to do if stopped working
After noticing the malfunction of the auger, it is necessary to establish the cause of the breakdown. Other measures depend on the cause. In some cases, it is possible to repair the machine, and in more advanced situations, individual elements will have to be replaced.
Check the laundry in the drum
If the wash is finished without spinning, check the number and distribution of items inside the drum. Overloading and uneven distribution lead to malfunctions in the operation of the machine. Before the next wash, read the included instructions and find out the maximum possible load.
Product Manual
In addition to the permissible load, the instructions for using the washing machine contain a number of useful instructions and nuances that will be useful for further operation. By reading the instructions carefully, you will be able to avoid many common problems that equipment owners encounter by accident or due to neglect of the rules.
Overload elimination
In most cases, when the spin has stopped working, the washer is overloaded too much.It is recommended to remove some items and try to restart the wash.
If the spin function still does not work, you will need to figure out the type of malfunction.
Checking the program for a crash
If the control module of the internal mechanisms malfunctions, an accidental program change may occur. It is recommended to try to restart the program, and if it is a single failure, you can continue to use the machine. In the event of systematic manifestation of failures, repairs will be necessary.
drain pipe
The drain hose is made of a corrugated plastic tube and rubber end caps. The pipe is used to drain the liquid from the tank into the sewer. Damage or leakage of the part leads to the fact that water remains inside the tank and the machine cannot activate the spin function. When the hose leaks at the handpiece connection points, check them for leaks and tighten if necessary. If you find mechanical damage to the hose, you will need to replace it.
Drain filter
If the drain filter is clogged, water cannot flow freely from the tank. Clogging is caused by dust, dirt and foreign elements entering the drum with clothing. When faced with a problem, you need to unscrew the drain filter and clean it thoroughly. If you find foreign objects, you must remove them. After cleaning, it is necessary to restart the machine in order to check the operation.
Tensioned belt
Stretching the drive belt causes it to come out of its fixed position due to the rapid rotation of the drum. As a result, the machine washes without spinning.It is almost impossible to restore a stretched belt, so a complete replacement is necessary to keep it running.
Service center or master
You can repair the machine at an authorized service center or use the services of a private master. Where to go for repair depends on the degree of damage and the availability of warranty. If the washing machine was purchased recently and the warranty period has not yet expired, it is better to contact the service center for free repair or replacement. In other cases, when a minor breakdown is found, it is easier and cheaper to seek help from a master.
How to clean the drain filter
The filter should be cleaned in stages. The procedure requires the following steps:
- Shut off the water supply and disconnect the equipment from the power supply. This is necessary for safety reasons so as not to suffer an electric shock.
- Open the hatch cover, under which the filter is located. On some models, the filter is located under a bezel at the bottom of the case.
- Drain the remaining water from the tank. It is important to be prepared for the water to start flowing, so you should take a basin or a cloth.
- Unscrew and remove the trap filter.
- Remove large debris and foreign objects from the filter. After removing the main dirt, it remains to clean the filter with an ordinary sponge with a hard surface, then rinse under water pressure.
- Attach the filter to its original position. The part should be located evenly, without distortions.
Prophylaxis
Regular maintenance reduces the risk of malfunction. For reliability, it is worth using a set of measurements.
Checking pockets before washing
Foreign objects are often lodged in the filter which will disable the rotation function.Pre-checking the pockets of your clothes will eliminate the need to frequently clean the filter.
Quality of washing powder
Poor quality powder negatively affects the condition of the internal mechanisms. By using proven powders, you can save on equipment repairs.
Network filters
Using an electrical filter protects the washing machine from sudden power surges and short circuits. The surge protector turns on automatically and does not consume a large amount of resources.
Periodic cleaning of the machine
By periodically cleaning the filter and drum, accumulated dirt can be removed in a timely manner. Self-cleaning makes maintaining your machine easy.
Drying after washing
Leave the drum open at the end of each wash. Drying helps release excess moisture and prevents damage to internal parts.