How to effectively remove oil stains from clothes at home
Complex substances and compounds can accidentally get on clothes. In order to restore the original appearance to the thing, you need to know how it is guaranteed to wash fuel oil at home without using chemical components. To remove pollution and get rid of stains, folk recipes and remedies that are present in every housewife will help. Compliance with the rules and recommendations will facilitate this process, and the result is of high quality.
Rules for eliminating oil pollution
Fuel oil is a specific substance that leaves a greasy, oily stain on fabric. During the process of elimination, various substances and methods are used, therefore it is recommended to carefully study the rules of work:
- the disposal method must take into account the degree of contamination and the type of tissue;
- chemical components - gasoline, acetone - are aggressive and highly flammable, you need to handle them carefully, in a well-ventilated room, away from heating elements or open fire;
- hand protection and respiratory protection are used - respirators or masks;
- you can not rub the oil stain - it will get even bigger;
- do not rub the dirt with a brush, even if the jeans are stained, because the stain will "stick" deeper;
- to remove dirt, you need to move from the edge to the central part;
- water will help remove traces of the presence of fuel oil (it is necessary to moisten pollution);
- the thick paper makes cleaning easier, it should be placed under the fabric if the places that cannot be unfolded (the sleeves of shirts or t-shirts) get dirty - this will help prevent the spread of fuel oil to other areas ;
- cleaning should be done from the wrong side, so as not to rub the substance deep into the fibers of the fabric.
To remove fuel oil, components are used that can break down oils or resins. It is impossible to carry out hand or machine washing without pre-treatment of the stain - it will worsen.
Folk remedies
Fuel oil can be removed from clothing at home. Simple formulations used in everyday life contribute to this. Contamination is removed with a composition based on ammonia and turpentine. The components are taken in equal proportions, a little warmed up. The resulting liquid is applied to the stain. Then, it must be rubbed a little (without strong mechanical stress). The last step: wash with warm water and soap.
For fine fabrics
Fine and delicate fabrics require a soft touch. Do not use aggressive compounds, as they will damage the fibers. During the cleaning process, you can use:
- tar soap;
- dishwashing detergents;
- carpet cleaners (chlorine-free if the fabric is colored).
If the stain is fresh, you can remove it by laying the stained cloth on both sides with paper towels, then iron the area with a hot iron. The change of towels is carried out 2-4 times, depending on the degree of soiling.
tar soap
The item is soaked in lukewarm water with any available detergent. Then wash by hand by rubbing the contaminated area with tar soap. Bleach can be used if the fabric is white. Creosote is also excreted by this method.
Detergent
Detergent helps to qualitatively remove oil contamination. Effective composition:
- detergent for washing carpets - 3-4 capfuls;
- hot water - a filled basin.
A thing is placed in the resulting liquid for 1-2 hours. Then you can wash it by hand.
eucalyptus oil
Eucalyptus essential oil will help clean the stain qualitatively. 5-6 drops are applied to oil pollution. Leave the oil for 2-3 hours. Then, with a cotton ball, also moistened with the composition, you need to wipe off the contamination until it completely disappears.
Baking soda
For the baking soda to work effectively, you need to heat the turpentine. The resulting composition is applied to the stain. He should stay 30 minutes. After that, soda is poured. There is also half an hour left. After that the item can be hand washed in warm soapy water.
For articles made of dense textiles
Dense textiles are used for the production of work clothes. For cleaning, the following substances are used:
- kerosene;
- butter;
- clay paste.
The hot method also works well and should be used when the stain is old.
Kerosene
Difficult oil stains are removed with this component. It is recommended to wear protective gloves. Undiluted kerosene is applied to the stain and left for 60 minutes. After that, clothes should be rinsed 2-3 times, washed with powder by hand.
Butter
The oil must be melted before being applied to the contaminated area. Leave on the fabric for 2 hours, then rub with a soft brush. Finally wash off with lukewarm water and powder.
clay paste
It effectively removes fresh stains from dense fabrics. It is necessary to apply a composition of clay and warm water (the consistency of sour cream) to the place of pollution. Wipe off after 30-40 minutes, then wash off with warm water with powder.
Hot method
It allows you to quickly remove dirt from outerwear or heavy fabrics. This will require:
- the iron;
- 4 to 6 sheets of paper.
Place half of the paper on a hard surface, then place the cloth to be cleaned on it. To achieve the effect, a hot iron is used, with which you need to iron the oil-stained area. After all the dirt has transferred to the paper, the thing will need to be washed in warm water with powder.
For outerwear
Fuel oil can stain a jacket or other outer clothing. To get rid of dirt, car shampoo and caustic soda are used.
car shampoo
When choosing car shampoos as a way to get rid of oil stains, you need to remember that liquids are strong and corrosive to fabrics. To remove the oil, you will need:
- apply oil to it (promotes softening);
- pour car shampoo on the stain;
- let stand 30 minutes.
After that, the thing must be washed 2 times: by hand, then in the washing machine, so that all the oil is gone from the fabric.Additionally, you can use a stain remover.
caustic soda
You should use it to remove dirt from dense fabrics. Be sure to respect the safety measures (gloves and mask). The composition is applied to the place of pollution, it remains for 20 minutes. After that, the thing must be washed off. You can also use an aqueous solution (2 tablespoons of baking soda in 1 liter of water). You will need to soak the fabric in it for 2 hours, then wash it with powder.
For the shoes
Kerosene helps remove fuel oil from shoes. It is applied to the stain, after which it is cleaned with a stiff brush.
Chemical products
A variety of chemical compounds and liquids that can break down oil or oils work actively. These include fabric or carpet stain removers, essential oils, bleaches, dishwashing detergents and glass and various automotive cosmetics.
Stain removers
They help remove stubborn stains. They should be used with care, as the formulations can ruin certain types of fabrics. After application, the holding time is 20-30 minutes. At the end, a washing cycle is carried out.
Kerosene, diesel fuel, white spirit or gasoline
Classic formulations for removing oil stains from heavy fabrics or outerwear. You need to work with them in well-ventilated areas, avoid heating. Soak on fabric for 30 minutes to 1-2 hours (depending on complexity of contamination). Washing is mandatory, as the characteristic smell persists.
Essential oils
They allow not only to remove the stain, but also to give clothes a pleasant aroma. Apply to pollution drop by drop.It is necessary to increase the quantity in case of severe pollution. The holding time is at least 30 minutes.
Bleach and dishwashing detergents
These formulations should be applied with care. If the product contains chlorine (bleaching), it will not work for colored items and fabrics. Dishwashing liquids are mild and won't work on tough stains. The holding time is 30 minutes. Then machine wash with powder.
Automotive cosmetics
It is used for difficult soiling. Can be aggressive; holding time - 15-30 minutes. Washing - with powder, lukewarm water, by hand, then with a typewriter.
By using these methods and recommendations, you can easily get rid of the toughest oil stains.