How to transport the refrigerator upright or lying down, how long to turn it on

There are certain rules on how the refrigerator should be transported. They will help prevent damage and breakage. The technician is prepared beforehand for the move and a suitable means of transport is selected. An important point is the choice of the position in which the device will be located during transportation. Useful tips and advice will help ease the transportation process.

Is it possible to transport the refrigerator yourself

Modern refrigerators are impressively large, so when the question of moving comes up, problems arise. The device can be easily damaged by the slightest wrong move.

A new refrigerator is brought from the store by specially trained people who know all the details of transportation. They skillfully load the device into a car, carry it along the stairs and easily install it in a confined space.

Installing a new refrigerator is easy. First, remove all the wrapping paper, then wash the device inside and out. Only place the refrigerator on a flat surface. Leveling feet help to choose a level position. After two hours, you can connect the device to the network.

The purchased material is packed in a rigid frame, lined with foam. The car has special fasteners and boxes, so the goods are delivered to the buyer intact and safe.

Pre-preparation and packaging

Before proceeding to the direct transportation of household appliances, you should correctly carry out the preparatory measures:

• The device is disconnected from the mains. Free of food.
• Removable glass and plastic shelves and boxes are individually folded and packaged.
• All chambers are thawed and wiped dry. An unfrozen refrigerator should not be transported, otherwise it may leak and damage all internal systems.
• Firmly secure the compressor by tightening the transit bolts. If there are no fasteners, the device is covered with a soft material, for example, rubber.
• Doors should be closed and securely taped.
• Outside, it is advisable to cover the refrigerator with foam or cardboard and fix it with adhesive tape.

If there isn't a lot of packing material, you should at least take care to protect the corners of the device.

The nuances of preparation for long-term transport from the refrigerator

Each model of refrigerator requires a distinct method of long-distance transportation. It is better to choose a machine that matches the dimensions of the refrigerator so that you do not have to stack it on the side:

• To avoid damage to the surface and parts of the device when moving, it is necessary to completely empty its contents.
• Be sure to defrost the chambers and wait until they are completely dry.
• The device should be packed in cardboard or foam in several layers, securing with a film.
• In transportation, you need to prepare the walls and floor.

Look at Also

Lighting options in the bathroom, rules for the selection and placement of lamps

The unit should be transported with care, choosing a flat and uneven road. Authorized speed 50 km/h.

Choosing a car to get around

The conditions of transport of household appliances are indicated in the attached documents. Manufacturers usually recommend transporting the device upright, in its original packaging.

Transporting the device in a standing position is possible on the back of a gazelle. When ordering a car, you need to specify the dimensions of the device. The height of the standard machines is 1.5 meters. But for the transportation of modern refrigerators, gazelles are offered, the height of which is from 1.8 to 2.20 meters.

How to charge your device on a car

Precautions must be taken from the first stage, when the device has just left the apartment:

• The device is transported from the apartment to the car neatly, without tilting, in an upright or slightly inclined position.
• A thick blanket or cardboard is laid on the floor.
• If he is supposed to install the device on the side, then the gazelle is brought into the living room with the bottom towards the exit.
• When loading, the equipment is first put on its feet, only then they take a permanent position. If it is supposed to be lying on its side, the device is gently tilted forward to a previously prepared place.
• The process of loading and unloading the device should take place without jerks or sudden movements.
• During loading work, do not hold on to the doors, as they could break.

After immersing household appliances on the machine, it must be securely fastened with special belts and additional fasteners.

Determine the position according to the size of the refrigerator and the machine

It is best to transport the material in an upright unchanged position. When transported lying down, there is an increased risk of oil leaking from the compressor into the heat exchanger, leading to inevitable equipment failure.

In the car body, the refrigerator must be fixed with special fasteners and spacers so that the device does not fall out during driving or sharp braking.

In most cases, the dimensions of the refrigerator do not correspond to the height of the truck to be transported. For transport in a horizontal position to be successful, certain points and rules must be taken into account.

Look at Also

What to plant in the country along the way and criteria for choosing plants, design features

Transport in upright position

The most correct option is to transport the equipment in an upright position, since the safety of the internal systems is guaranteed to the maximum:

• The device must rest on a flat and soft surface.
• A layer of cardboard or foam is laid on the floor.
• In the designated place, the refrigerator is fixed with additional straps and fasteners.

In this position, there is the least chance of damaging the case and the operating systems of the device.

The nuances of carrying the device at an angle

If the refrigerator does not fit into the vehicle body at full height, then it is permissible to place the refrigerator at a slight angle (no more than 42 degrees). Any available hardware is placed under the device and secured with fasteners.

horizontal placement

It is possible to transport equipment in a lying position, but only if certain conditions are met. It is important to remember that the transport time in this case should not exceed 35 minutes:

• When the refrigerator is lowered along the stairwells, they are transported upside down.
• To prevent damage, the lower body is covered with several layers of cardboard, polystyrene or a thick blanket is laid.
• The device is lying on its side. It is important to correctly determine which side is best to place. Lay with the compressor tube facing up.
• Then proceed to repair the device.

Determining which side to transport your fridge is easy. When the refrigerator is turned on, you must carefully touch the pipes coming out of the motor section. The tube that is hot must be at the top when you turn the device.

When to plug in after transportation

To prevent the device from breaking down due to transport, you need to know after how many hours it can be connected to the mains.

The length of time the refrigerator should not be turned on depends on several conditions:

• If the device was transported vertically and it is hot outside, it is enough to wait 2.5 hours. More time is needed during winter, about 4.5 hours.
• After horizontal transport, it is necessary that the device stays at least 8.5 hours in summer and 12.5 hours in the cold season.

It is impossible to immediately connect the equipment to the network. It takes some time for the oil to return to the compressor.

How old appliances are transported

Transportation of old refrigerators begins with disconnection from the network, release of products, shelves and boxes. Then the chambers are thawed and wiped dry.

Look at Also

How to choose the right interior doors, selection criteria and tips

Old devices are best transported upright, but transport is also permitted in a lying or tilted position. Transport in the back of the vehicle is not permitted.

Always bolt down the compressor before transport. Better to wrap the outside of the device in cardboard or foam. If it is supposed to be transported a short distance, you can do without packaging.

Useful transportation tips

To prevent the refrigerator from causing damage and breakdowns, there are some useful tips to keep in mind:

• the best position for transport is upright;
• preliminary defrosting of the refrigerator will prevent leaks and reduce the weight of the device;
• all removable parts of the equipment are either securely fixed inside or transported separately;
• be sure to repair the compressor;
• packaging is necessary to preserve the integrity of the appearance and avoid the appearance of chips;
• it is important to use strong and reliable fasteners;
• there should be soft, flat ground under the equipment;
• during transport, complete immobility of the equipment must be ensured;
• after installation in a new place, wait for a while and do not connect the device to the mains.

It is best to order for transport, especially over long distances, a special vehicle, which is equipped with all the necessary fastening materials.