Top 5 brands of decorative silk effect paints for walls and how to apply them

Various materials are used in the design of interiors. But among such products stand out decorative paints with a silk effect for walls, which visually imitate fabric. This material gives the treated surface a “soft”, translucent appearance. However, when recreating the effect of silk, it is important to take into account several nuances of applying this paint.

Peculiarities of the composition of silk dyes

Silk paints are based on acrylic resin. Water is also included in the composition, which speeds up the drying of the material. The material acquires a tint due to the introduction of a special pigment. Due to the presence of water in the composition, such a safety paint should be applied indoors. And the effect of silk is recreated by a pearlescent pigment. This material changes color depending on the angle of incidence of sunlight. The following is often added to the original composition:

• cellulose;
• cotton;
• shredded sequins.

Such components change the appearance of the coating after drying, recreating the glossy metallic or brocade effect.In addition to these, substances are introduced into the composition of the paints that help to achieve iridescent overflows or mosaics on the treated surfaces. This material, due to the presence of acrylic, can be applied to wood, concrete, brick and drywall.

Advantages and disadvantages of liquid silk

This material, after drying, prevents the appearance of mold and mildew. This is especially true when the paint is applied in rooms with high humidity.

Look at Also

Varieties and colors of paints-chrome, the 4 best manufacturers and how to apply them

How to choose the right composition for the interior

The choice of paint depends on personal preferences. But when it comes to liquid silk, there are a number of nuances that should be considered before purchasing material:

• to create such decorative effects as sea ripples, compositions imitating decorative plaster are suitable;
• to give the walls a velvety or velvety effect, formulations with small colored particles help;
• to visually increase the size of the room, pearl paint is used;
• acrylic compounds help recreate the effect of marble or granite on the surface;
• to create a mosaic or other non-standard patterns, it is recommended to use a stencil.

It should also be borne in mind that the method of application affects the final result. When processing walls with this material, 3 methods of application are used: wet, compressed and classic silk. In the latter case, the chosen type of paint does not play a significant role.

Popular manufacturers

Silk effect paints are produced by different manufacturers. But among the presented brands there are 5 that are more popular.

Dali-Deco

This type of material is used both for manual painting and using a spray gun.

Caparol Capadecor Stuc Eleganza

As with the previous brand, this paint can be applied using specialized equipment.

Clavel

It is more difficult to work with this material, but at the same time you can create not only a classic, but also a modern interior.

Look at Also

Technical characteristics and composition of enamel NTs-132, top-4 manufacturers

St. Mark

When working with this material, it is necessary to apply paint over the entire surface, without pausing. Otherwise, there will be visible seams.

Natura interior

As in the previous case, this material should be applied over the entire surface.

Coating rules

As mentioned above, liquid silk can create different effects depending on the method of application chosen.

In this case, in each case, it is necessary first to prime the walls in 1-2 layers, removing old finishing materials, and then leave them for at least four hours. Then you can start painting the surfaces.

Classic

To create the classic silk effect, you need to follow these steps:

1. Apply a base coat, forming slight irregularities on the surface to be treated.
2. Leave the base coat on for 4-5 hours.
3. Using a Venetian trowel, smooth the dried material, moving in different directions.

This method of coloring is recommended for use in salons and other large areas.

wet silk

Painting using this technology is carried out as follows:

1. Using a Venetian trowel, a base coat is applied, which should dry within five hours.
2. A layer of liquid silk is applied using a plastic washer or trowel. With the tools indicated, it is necessary to make circular movements.

Look at Also

Types and top 6 brands of paints for windows, how to choose and rules of application

The spreading amplitude of liquid silk can be different. The peculiarity of this coloring method is that the result is a drawing, the shade and shape of which change depending on the viewing angle.

Compressed silk

This painting technology also involves the application of a primer, after which the surface is covered with a base coat. In the latter case, a velvet roller is used. After 2-3 hours, with random movements, using a sea sponge, the effect of wet silk is created, and after 20 minutes, the material is randomly smoothed with a plastic spatula.

Examples inside

In addition to the silky matte and other effects discussed earlier, this type of paint allows you to create various options for interior decoration. When using pre-prepared stencils, you can get original patterns that look like braids on clothes. And if you fix a piece of fabric on a roller, then when painting you get a non-standard pattern due to the formation of a "relief" on the walls.