How to glue PVC panels, an overview of the best brands and step-by-step instructions
Modern building materials are easy to install. The popularity of plastic panels for home wall decoration is associated with their curb appeal and affordability. You can fix the siding with nails. But glue is the best and easiest. You just have to choose which adhesive is best for PVC panels and how to use it correctly.
Basic requirements for the adhesive composition
Installation of PVC panels is carried out using glue, most often choosing universal. But it is necessary to use a composition of the product that can withstand the weight of the finish and will allow it to last longer on the walls.
Moisture resistance
Usually the panels are lined with walls in the kitchen, in the bathroom. Humidity is higher in these rooms than in other parts of the house. Therefore, the glue must maintain the panels at a high percentage of humidity. Care should be taken when selecting material.
Heat resistance and frost resistance
For an adhesive composition, resistance to extreme temperatures is important. Polyvinyl chloride should not hang behind the walls when it is hot in the room. Pay attention to the cold that the glue can withstand.
High degree of adhesion
Strong adhesion is one of the important properties of glue. After all, you need to glue PVC panels on plaster, concrete surfaces. With a quick setting of the composition, after 10 minutes the liner will firmly adhere.
Antibacterial additives
To prevent harmful microorganisms from getting under the panels, antibacterial substances are added to the adhesive composition. They will prevent the development of pathogenic fungi and molds.
UV resistant
The adhesive should not be afraid of direct sunlight. Then the decorativeness of the walls will not be disturbed.
Ease of use
When buying a means for gluing panels, you should pay attention to the packaging of the material.
It will be convenient to use the composition if it is viscous and passes well through the narrow neck of the bottle or tube.
Composition Transparency
Better when the glue mass is transparent. Thus, excess funds will not be visible on the surface. They can be removed so that they do not stain the surface of the glued walls or ceiling.
Adjustment speed
Repair work will be completed faster when it is not necessary to wait for strong adhesion of materials. If after 10 minutes after applying the glue, the plastic adheres to the surface, the plating will take place instantly and successfully.
Absence of toxic substances and pungent odor
The adhesive composition should not harm human health. With high toxicity, poisoning may begin and antidotes will have to be taken. An unpleasant smell of the product will tell about the harmfulness of the glue.
Review of popular brands
There are well-known brands of means for gluing PVC panels. Proven formulations are selected and tested by customers and represent the best options.
Kleiberit Universal Plastic Adhesive
A distinctive feature of the universal product is its good resistance to high humidity. Hence the recommendation of an adhesive product for the installation of plastic panels in the bathroom. The glue is based on artificial resins without harmful additives. The composition is characterized by mass homogeneity, quick adhesion.
"Moment-crystal"
The advantage of a quality product is:
- water resistance;
- transparency;
- temperature consistency of -40 and +70 degrees;
- resistance to aggressive influences.
The only drawback of glue is its flammability. Therefore, when working, it is necessary to use the product away from heating devices. Keep windows open when working with glue.
Liquid Nails "Moment Montage"
The binding has proven itself on the positive side. At the same time, the use of liquid nails is simple. After using the product, you can be sure of the strength and durability of the panels on the walls and ceiling.
"Emficol"
The mixture for fixing PVC panels will allow the material to adhere well to the walls.The transparent adhesive mass does not change under the influence of different temperatures. It is viscous, easy to apply, quickly adheres to any surface.
MiterFix
The composition of the adhesive is based on cyanoacrylate. It quickly and firmly connects plastic surfaces to any other. The product does not allow moisture to penetrate under the panels, protecting against the action of pathogenic bacteria and fungi.
wild titan
The glue request is associated with:
- efficiency in construction and repair work;
- resistance to harmful influences;
- elasticity after drying;
- high respect for the environment;
- economic application.
When working with glue, reliable adhesion to plaster and concrete is ensured.
Quality
The professional product contains polyvinyl acetate polymers. Hence the special adhesive force. 15 minutes after application to surfaces, panels will sit firmly on walls.
How to install correctly
Preparation for the installation of panels on the walls is carried out by assessing the quality of their surface. You cannot stick on the walls if there is dust and dirt on them. Therefore, before bonding, a period of surface preparation is required. It is necessary to thoroughly clean the walls of old coatings and dust. If there are small irregularities, flaws, they should be smoothed out with putty.
The next step is to perform a deep bait. The walls must be dried before gluing the panels. It is not recommended to stick on wet surfaces.If you do not want to level the surfaces to glue the panels, you must screed the walls. It is difficult to make and install it yourself, so the installation should be entrusted to a specialist. It should be borne in mind that the room will decrease in size.
Panels need acclimatization after purchase. They rest in the room for at least 12 hours before gluing.
Features of gluing wall panels
Proceeding to the process of installing panels, it is necessary to mark the 1st lane. Installation starts from the corner or doorway. When the part is perfectly level, the following sheet metal panels will lay down according to the defined level. Instead of a plastic sheet, a plinth is used in the corner. They are glued at an angle of 90 degrees.
With glue, dotted or dotted over the entire surface of each panel. After application, the material is pressed against the wall and held until the adhesive is completely set. They immediately try to remove the excess adhesive protruding from under the plastic sheets. Later, after drying, it is more difficult to remove the droplets.
Glue is applied to the wall if you want to improve the adhesion of materials. In this case, the wall surfaces are degreased. If the plastic is installed on the crate, then it is also degreased and greased with an adhesive after drying.
How to glue PVC mosaic
For bathrooms and kitchens, ceramic tiles are expensive. Then you should pay attention to PVC panels. You can choose a design according to your taste. And the PVC mosaic will stay shiny for a long time. And the material is very resistant to moisture, temperature extremes, which allows you not to carry out repairs for 10-12 years.
It will be necessary to glue the stripes with patterns, choosing in such a way as to keep the design. Better to start from the corner. The first panel or plinth is glued, then the rest of the material is leveled. The wall turns out to be decorative, it will become a real decoration of the kitchen, the bathroom.
How to correctly calculate material consumption
It is necessary to calculate in advance the amount of glue to be repaired. Measure the area to be covered with PVC sheets. For 2 linear meters of material, glue is applied with a thickness of 6 millimeters. If there are 300 milliliters of funds in a tube, one copy will be enough for 5 panels. To determine the number of sheets for gluing the walls, you need the help of a specialist. You can turn to the "Calculator" program, thanks to which the number of sheets of plastic material is accurately calculated.
Is it possible to glue on a putty
Silicone sealants are used by many to glue wall panels. Here you should pay attention to the composition of the product and whether it can be used as an adhesive. The tubes are sold with a sealant, which indicates what material can be glued with this product. But nevertheless, it is better to stop the choice on a special glue.
You will need a silicone sealant when you need to seal gaps and gaps between panels. Use the material at the end after the repair, when the bonding is finished. The sealant will make the walls protected from moisture and harmful microorganisms.
Additional tips and tricks
The work of installing plastic panels requires certain skills and knowledge. It is worth listening to the opinion of experts who advise:
- when cutting the panels, turn them to the right;
- drive nails carefully during installation so as not to damage the material;
- align the corners of the room before starting work;
- use an alcohol solution to degrease surfaces;
- choose silicone-based glue or sealant, which does not have a pungent smell.
Plastic panels will serve for a long time if properly mounted and glued. Foam from detergents is used to wash them. Abrasive preparations should not be used. Aggressive substances will spoil the surface of the plastic, erase the pattern.