To better glue the seam of fishing overalls, the choice of compositions and instructions

Fishing tackle lets you do what you love in all conditions. Particular attention is paid to the material, it allows you to spend hours in a cold tank. Fishing often takes place in extreme conditions, damage to equipment is not excluded - punctures. What can be used to glue the seam of a fishing suit, it is worth knowing for lovers of fishing. As a result of the repair, the equipment will serve for more than a year, withstanding the tests of the scorching sun and low temperatures.

Basic requirements for glue for working with fishing suits

The main requirement for the product is a reliable and durable connection. The seam should remain intact and not come unstuck when moving through the water. Therefore, when choosing a composition, it is recommended to pay attention to the following characteristics of the product:

• you should not buy cheap compounds - such a group does not differ in quality, reliability, glue components can aggressively affect the material of the suit and, instead of fixing, will only increase the rupture zone of the seams;
• buying superglue will also not solve the problem - the composition firmly fixes the cuts on the fishing suits, but the connection does not withstand temperature changes, and the equipment again needs to be repaired;
• when choosing an adhesive, you should pay attention to such characteristics as heat resistance, resistance to changes in temperature indicators. It's no secret that fishing often takes place in extreme weather conditions, the seam should not diverge in the scorching sun and at negative temperatures;
• it is better to dwell on special formulations designed for a specific material. Universal products can stick anything, but the question of quality and durability remains open;
• the glue must be elastic enough to maintain the integrity of the seam during movement;
• water resistance is a mandatory requirement for products. The main purpose of a fishing suit is to be protected from water, the equipment must remain intact even after many hours of stay in the tank.

Look at Also

Description and properties of polymer glue, varieties and application instructions

What adhesives are suitable

Glue for fishing suits should have a special composition that provides durable and reliable fixation. A quality product consists of one or two components - resin, polyurethane, rubber, chloropropylene.

Main formulas:

1. The range of PVC products is diverse, professionals advise to pay attention to two-component glues. It is based on cold and hot fixing polyurethane. If the repair process is done correctly, the instructions are followed, the suit will withstand fishing on a hot summer day and weathering in late fall.The composition retains the properties of strength, waterproofing, allowing the equipment to be used for more than one season.
2. For rubber suits, a rubber-based glue is recommended (available from anglers and hardware stores). It is optimal to choose a product from the middle price segment; advertising is often included in the price of higher-class products. And budget brands do not differ in quality and durability. Rubber adhesive can be combined with a hardener to increase strength and durability.
3. Universal formulations are used to restore suits made of PVC, rubber, neoprene, membrane and other materials. When choosing a group of GPs, one should remember the possible risks; are considered to be of lower quality compared to specialists. The main advantages are an affordable price, a wide range of applications, which can be found in any store. Universal compounds are used for fixing rubber, textiles, a group of polymers.

Rules for working with a fisherman costume

Sooner or later, every angler is faced with damage to their fishing suit or wading boots. Completely changing your equipment is not the best option, it is worth trying to restore the integrity of the equipment.

Rubber suit repair:

1. You will need an old rubber boot - cut the patch to size.
2. Use sandpaper to clean the area to be repaired, as well as the patch itself.
3. Degrease the patch and the damaged area of ​​the rubber suit. Gasoline, acetone, solvent are used. It is best to work in rubber gloves, which also need to be treated.
4. Apply rubber cement to the patch and damaged area of ​​the suit. It will take 20-30 minutes to dry the composition, the patch is not attached to the area requiring repair.
5. After the specified time has elapsed, apply a second layer of glue. Then the patch is applied to the damaged area. Leave until completely set for several hours. The glue dries quickly, but the wading suit can be used within a day.

Look at Also

How to make dough from flour, recipes at home

Membrane suit repair

Special compositions based on neoprene and polyurethane are used to repair suits not only from a membrane, but also from PVC. Effectively seal seams, abrasions, holes of different diameters.

The adhesive drying time is 10 to 14 hours.

Membrane combination repair:

1. Cut out a patch of nylon or other synthetic fabric identical to the damaged area.
2. Turn the product upside down. Apply masking tape to the area with the hole.
3. Then turn forward, fill the hole with glue.
4. Put the prepared patch on top.
5. Wait a few hours and reapply glue to the front side for a firmer hold.

Wader repair

Fisherman's rubber pants are waders, vulnerable to damage from branches and reeds in bodies of water, often tearing along the seam. For repair, a specialized glue is used, developed for the quick restoration of fishing tackle.

How to glue neoprene waders:

1. Flip the suit to the wrong side.
2. Use scissors to cut the area around the thinning area on the jumpsuit with a tolerance of 1cm.
3. Attach the resulting piece to a new neoprene patch, circle it with an allowance of 3-5 mm. Cut the patch along the outline.
4. Put on the waders and try on the part, if it fits the size of the hole, start preparing the material.
5. Treat the damaged surface with a hardener cleaner or acetone.
6. Glue is applied to the edges of the patch and holes. Apply end to end, without overlapping, the fixing time is indicated in the product instructions.
7. Additionally, the seam is sewn with nylon thread and treated along the outer and inner edges with glue.
8. Wait a day; Once the glue is dry, turn the wading pants inside out and check the quality of the repair. The neoprene should lie flat on the front side.

Popular brands of wader repair products are Aquasure, Stormsure, Technisib. Designed for express repairs, restoring sealing and elasticity to the product. Designed to repair neoprene, fiberglass, rubber and soft PVC wetsuits.

Look at Also

What is the Best Glue for Scrapbooking, Popular Brands and Tips

Seam repair:

1. Treat the material with a solvent.
2. Apply specialized glue along the seam with a thickness of 1 mm.
3. Work the joints with a brush so that the setting compound covers the joint by 3-5mm.
4. Treat the seams from the inside in the same way. By analogy, areas with scratches are restored.
5. Leave to dry for a day.

Possible difficulties

Tears and punctures in fishing gear may need to be repaired. It is difficult to remove the remnants of the previous bonding compound, the adhesive bonds to the substrate at the molecular level. When cleaning the surface, do not use force, mechanical stress can lead to damage, increasing the area of ​​rupture.

It is worth abandoning aggressive compounds, solvents. It is best to use abrasive materials, such as zero grade sandpaper. Very carefully remove the glue residue so as not to damage the base.

Rules for working with glue:

1. First you need to degrease the surface - a solvent, acetone or gasoline is used. It is better to sand the edges of the seam to be fixed with sandpaper for better fixing. Neoprene products are only solvent coated, do not require sandpaper.
2. To speed up the gluing process, it is worth using a construction or ordinary hair dryer - the flow of hot air activates the process.
3. You should work with various adhesives in a well-ventilated area. You can repair equipment outdoors if the humidity is not higher than 50%, the temperature is 15 to 25°C.
4. To check the quality of the performed repair, you do not need to go to nature. Just use a flashlight or desk lamp. Enter a dark room, place a light source inside a jumpsuit or boot. It is recommended to check your equipment before each fishing trip.