TOP 15 tools to wipe grout from tiles and wash it quickly at home
If you do not immediately carry out cleaning when finishing the seams, the question will arise after the repair, how to scrub tile grout... There are several options available, and you should choose the right one based on your own needs and available resources.
Basic cleaning rules
It is possible to get rid of the need to clean the grout after the repair if you immediately wipe the joints of the tiles. It takes about a day to completely dry the putty., and afterAnd this time the situation is complicated. It is particularly difficult to clean tiles with embossed surfaces. Dried grout hardly dissolves from water exposure, so specialized tools are required.
Cleaning methods
Various materials are used to grout the joints between the tiles, which can be wiped with certain substances.Cleaning after renovation, you need to know what type of grout was used for finishing work.
For cement trowel
Cement mass is most often used for finishing tile joints.Fresh cement can be cleaned from tiles, after treatment with warm water, wipe the surface with a sponge. When the mass has time to solidify, it is necessary to apply more radical methods.
Acid solutions
After touching the surface, solutions containing highly active acids begin to soften the cement grout. Among these solutions, you can use:
- Liquid concentrate that is suitable for all types of tiles and fills uneven surfaces, simplifying workflow.
- Powder to dilute. This option does not apply to porous and marble surfaces.
Highly concentrated acid solutions should be used according to the enclosed instructions. For greater reliability, it is recommended to test the product in a small area to first ensure that the result is safe and that there are no negative consequences.
whitening liquid
This substance is designed to effectively remove plaque, traces of cement and other building materials. The liquid is diluted with water and applied to the tile joints using a brush, roller or spray.
After waiting a few minutes, the surface is wiped with a sponge with a not too hard surface or a rag.
Special stripper for cement deposits
A specially developed cement mass remover is widely used after finishing and repair work in residential buildings and in production. The composition not only helps remove grout, but also concrete splatter, tile adhesive, and other types of contamination. The solution can be used indoors and outdoors. The washing action is 2-3 minutes; a sponge or spray bottle is used for application.
Based on epoxy resins
Epoxy residue solutions are used to remove streaks, stains and other contamination from tiles after working with grout and other epoxy-based materials.
Special cleaning solution
Bi-component The remover, which is most often available as a spray, removes stains within 12 hours of application. The cleaning solution has the following advantages:
- removes epoxy residue after just one treatment;
- does not leave marks on the tiles;
- disappears quickly after application.
Mechanical impact
It is not always possible to wash off dried grout with the help of various solutions, therefore additional mechanical action is required. In most cases, a sponge treatment with a rough surface helps. At the same time, it is important not to damage the tiles during the work.
Costs
You can remove fresh grout from ceramic or glass surfaces with a standard stripper. You can use the substance immediately after installing the tiles or after completing the grouting work.
Steps to remove cement grout at home
To do things right TO DO cleaning after renovation, it is necessary to perform several steps step by step. Following simple instructions will get you the best result with minimal effort.
Coaching
Personal protective equipment including rubber gloves, goggles and a respirator should be worn before direct work if corrosive substances are used.
You should also open a window in the room. In case of works in the bathroom, you can open the water in the bathtub.
Application of the solution
The solution is applied to any excess stains that remained on the surface of the tiles after finishing.For point application of the solution, it is better to use a brush.
Wipe off dirt
After treating the pollution, wait 5-10 minutes for the active substance to interact with the trowel. Then the softened solution is washed off in a circular motion. If the stains are not removed the first time, you will have to clean the tile again.
How to wash
Simply wipe off the remains of the wash from the surface with a sponge soaked in water. Even a small amount of acid mortar can corrode the cement and the tiles themselves, so it is important to remove the substance completely.
folk ways
In addition to the use of special equipment, you can resort to folk methods. In practice, several options have become widespread, which allow you to quickly remove traces of putty from tiles. You can use most folk methods using various improvised means.
Means for cleaning tiles on the floor
In the composition of the substance for cleaning floor tiles there are acidic components that allow you to remove cement stains. For cleaning, it is necessary to distribute the solution over the dirty area, wait 15 minutes and remove the residue with a brush.
Descaler
It is recommended to use a descaling agent when treating floor tiles after renovation work. The substance is rubbed into the embossed surface with a brush.
white spirit
Solvent used in various fields ToThe alcohol consumed contains hydrocarbons obtained by refining petroleum products. Cleaning with this solvent makes it easy to remove stains from porcelain stonewarea and similar surfaces. For treatment, you need to mix 1 tablespoon of the substance in a glass of warm water.
Glycerol
Glycerin does not contain corrosive ingredients that can damage tiles, so the substance can be used to clean any surface. To clean streaks and stains, a mixture of glycerin and water should be prepared in a ratio of 1: 3.
Ammonia solution
An ammonia (ammonia) solution removes even stubborn dirt on the tile. So that after processing there are no streaks on the tiles, it is recommended to prepare the mixture by adding a tablespoon of the solution to 1 liter of water. The resulting substance is sprayed on the tiles or covered with a brush.
lemon acid
The use of citric acid removes traces of cement grout, glue, lime deposits and other substances. To clean the tiles you need:
- wear protective gloves and immerse the brush in the acid;
- wipe dirty areas on the tiles, without touching the seams;
- carry out the treatment until the stains are completely eliminated.
soda and vinegar
To prepare the cleaning agent, you can mix 2 and 3 tablespoons of baking soda and vinegar respectively. The mixture softens the traces of cement and even cleans the embossed surface. The solution should be applied to the stains and rubbed off with a brush after 10 minutes. For the best results can use sodium carbonate, not baking soda.
Abrasive sponge
Tile sponges are a special type of foam rubber or polyurethane foam, on which there is an elastic film with an abrasive. Different types of sponges differ in the amount of abrasive grains. Depending on the type of surface to be treated, it is better to choose a harder or softer sponge.
How to remove epoxy
Epoxy resin dries completely during the day and is invulnerable to the influence of acid-base compounds.It is only possible to remove traces of epoxy resin using highly reactive reagents. Use cleansers, it is necessary to follow a number of rules and prepare well for work. Read more here.
Coaching
The first preparatory step is the selection and purchase of a special softener capable of removing epoxy residue. In addition, to complete the work, it is necessary to prepare a metal brush for processing a ribbed surface, protective gloves and a respirator.
Glue the seams
To prevent the cleaner from destroying the joints of the tiles, it is necessary to close them during the washing of stains. The application of a thick layer of masking tape creates an obstacle to the passage of the solvent to the seams. If the solution gets into the seam, you should immediately wipe it off with a rag or sponge.
Solvent
If the epoxy is dry, it should be treated with a solvent and allowed to soften for 10 minutes. Then, traces of grout are removed with a wire brush or scraper. When performing work, it is important to be careful and control the degree of pressure so as not to destroy the tiles and not leave scratches on the surface.
How to clean tiles
When you are done wiping the stains off the tile, it is necessary to rinse the surface of the tile to remove the remaining solution. Otherwise, the solvent can penetrate the joints of the tiles and destroy their structure or penetrate the skin.
To wash the tiles, Wear gloves to protect yourself, dip a sponge in the tile cleaner and scrub vigorously.
How to remove a puffer
You can remove the old layer of grout between the tiles, using a paint knife.The principle of fugue removal is to gently run the knife along the seam several times without touching the edges. Under the pressure of the knife, most of the grout will spread out, after which a ridge will remainshake Leftovers. Instead of a knife, it is permissible to use a grinder, but this tool is best used only with practical experience. The need to remove grout arises when applying new grout.
Prophylaxis
Typically, the old tile only holds onto the porous grout. Therefore, for prevention purposes, you cannot remove, but renew the grout between the tiles. Acids, reagents and folk remedies are suitable for this. Periodic renewal of the grouting compound allows you to securely hold the tiles and maintain the proper appearance of the space between the tiles.
