An overview of the best home hot tub cleaners
A hot tub is a complex piece of equipment that requires regular cleaning. In this case, you need to clean not only the bowl, but also the pipes in which dirt accumulates over time. Before you start cleaning, you should familiarize yourself with effective Jacuzzi cleaners.
Why you need to clean your spa
Before you start cleaning, you should familiarize yourself with the reasons for cleaning. Experts recommend cleaning the hot tub regularly, as mold and bacteria gradually accumulate in the tubes. Such dirt looks like sticky black dirt, which can only be removed with detergents. If you do not get rid of such pollution, after turning on the hydromassage, the water will become dirty.
It is also necessary to clean the structure in order to eliminate biofilms. In this case, you will have to use stronger cleaning agents for acrylic structures.
How to properly clean your pipes at home
Often, when performing work, it is necessary to clean the pipes, in which contamination most often accumulates.The procedure takes place in several stages:
- Dismantling. First, all contaminated items must be dismantled. This must be done carefully so as not to accidentally break anything.
- Cleaning. It is not necessary to use cleaning products for this. If there is little accumulated dirt, you can simply run strong water pressure through the pipes.
- Facility. When all the elements are cleaned, they are installed in place.
Regular cleaning rules
There are a few rules for regular cleaning that you need to know in advance.
Daily
To prevent the bathroom from getting dirty, it is necessary to clean it every day. In this case, it is not necessary to use special detergents. Simply rinse the hot tub after each use to remove any remaining dirt. Then the surface is wiped with a dry cloth or soft sponge.
It is contraindicated to use hard sponges, as they can damage the coating.
Monthly
It is necessary to clean the jacuzzi from dirt monthly. In this case, the following sequence of actions is performed:
- fill the bath with water for 5-10 centimeters;
- disinfectant infusion;
- turn on the pumps for five minutes;
- water drain;
- fill the structure with water and connect the pumps;
- disassembly of filters and their subsequent cleaning;
- installation of cleaned filter elements;
- wipe the cleaned surface of the hot tub with a dry cloth.
Annual
A thorough structural cleaning should be done annually. It goes as follows:
- Filling the bath. It is filled with water to the level of 5-7 centimeters.
- Adding vinegar. For better cleaning of impurities, a liter of vinegar is added to the water.
- Starting the pumps. They are connected for 1-2 minutes.
- Rinsing the bath. The washed structure must be rinsed to get rid of the remaining dirt.
- Scrub the coating. The washed surface should be wiped with a dry cloth.
Overview of special tools
There are six effective products that are often used to wash a hot tub.
wonder worker
It is an effective product used for disinfection and cleaning of bathroom structures. It can be used to remove grease, soap, dirt and even limescale residue from the coating. The main advantage of Wonder Worker is that it is completely safe for almost all types of coatings.
To clean the hot tub, fill it with water and add some cleaning fluid. Then the pumps are turned on for half an hour. When they are turned off, the water is drained and the structure is wiped with a rag.
Jacuzzi Bagi
It is one of the most effective cleaners for swimming pools, massage tubs and hot tubs. Regular use of Bagi prevents the formation of fungi and bacteria. With this detergent mixture you can clean both the external and internal surfaces of the structures.
The bottom of the jacuzzi is covered with water, after which five milliliters of Bagi are added to it. The mixture is thoroughly mixed, after which it is washed off. Then the water is drawn out again, which rinses the washed surface.
honeyed
It is a multifunctional product that not only removes impurities, but also helps get rid of unpleasant odors. Mellured effectively fights bacteria, fungi and other dangerous microorganisms. These household chemicals are used to remove plaque from the bowl itself and from the pipeline.
Before cleaning, the detergent is mixed with water, after which the bath is wiped with the resulting mixture.
After treatment, the surface must be rinsed with water.
unicum
It is a versatile household cleaner that is often used to clean hot tubs. It can be used to eliminate mold, fungus and bacteria. Among the advantages of Unicum, it is distinguished that it cleans not only external coatings, but also internal pipes. Other benefits include disinfectant properties, grease removal and compatibility with most types of coatings.
Triton
This detergent is used to remove dirt from cast iron, steel and acrylic coatings. Triton is ideal for removing scale, scale, rust and grease. The product contains disinfectant components and is therefore used to disinfect plumbing fixtures.
Use Triton regularly as it stops the growth of mold and mildew.
Edel Weiss
Sometimes it is necessary to clean the hydraulic system. For this, it is best to use Edel Weiss, who does an excellent job of this task. It is recommended to mix the composition with water during use. At the same time, only 250-300 milliliters of a chemical agent are consumed per hundred liters of water. Edel Weiss should not be combined with cold but hot liquid.
Surface cleaning features
Cleaning surfaces made of different materials has certain characteristics that you should become familiar with.
Acrylic
Most often, bowls are made of acrylic. This material is durable and long lasting. However, despite these characteristics, acrylic surfaces are easily scratched. Therefore, when cleaning them, it is contraindicated to use powder detergents. It is best to use liquid cleaners, which dissolve in water when used.
Marble
Marble products are the easiest to maintain. Such coatings are the most durable and reliable. The surface of the marble is not sensitive to scratches and can therefore be cleaned by any means. The easiest way to clean them is with laundry soap. It is brought up with water and applied to the surface with a cloth. Cleaning with laundry soap is carried out 2-3 times a month.
Melting
Cast-iron structures are treated not only with liquid detergents, but also with powder. They are applied to a dirty surface and then wiped with a damp cloth. It is necessary to use these powders carefully so as not to leave traces on the surface.
Work should be done with durable rubberized gloves so that the skin does not come into contact with the soapy liquid.
Disinfection of the hydraulic system
At least once a month it is necessary to carry out disinfection work. The procedure is performed to clean the pipes from dangerous bacteria and plaque.
During the procedure, all disinfectants must be diluted with water. The prepared composition is poured into a small hole located on the side of the structure. When the product is poured, the disinfection cycle starts. After ten minutes, the poured liquid is drained.
Preventative measures
In order not to accumulate a lot of dirt in the jacuzzi, it is necessary to carry out preventive cleaning. To do this, use acetic acid, which is washed off once a week with the structure. When cleaning, vinegar is mixed with water in a ratio of one to ten.
Additional tips and tricks
To clean blackheads and get rid of mud flakes, follow these tips and tricks:
- after each cleaning, the jacuzzi must be rinsed so that there are no detergent residues on the coating;
- in the process of taking a bath, you should not use oils, as they leave a plaque on the coating;
- it is better to wipe the surfaces with soft rags so as not to leave scratches and other marks;
- the preventive rinsing of the jacuzzi must be carried out at least three times a week.
Conclusion
After prolonged use of the Jacuzzi, traces of dirt appear on its surface, which must be removed.
Before you start cleaning, you need to familiarize yourself with the basic ways of washing bathtubs and understand the peculiarities of their use.