How can you wipe paint from linoleum, how to quickly wash off dirt
When carrying out cosmetic repairs, due to negligence of actions, stains remain on the surface of the floor covered with linoleum, which spoils the appearance of the room. Linoleum is a synthetic and soft material; if dirt is not removed carefully, the coating may be damaged. How to wipe paint from linoleum?
In this article we will try to figure out how to remove stains from the surface of the floor.
Pollution characteristics
After the repair, specific contamination remains in the part in the form of pieces of dried paint and varnish. If the ceiling was painted with water-based paint, drops fall on the floor. Many people freshen up heater cores with acrylic and window sills with nitro enamel or oil paint. With careless work, their spray remains on the linoleum.
How to remove a fresh stain
Spraying of the paint solution cannot be avoided during painting work, therefore, be careful when working.
When using a water-based suspension, there is no particular difficulty: it is enough to wipe it off with a damp cloth or a paper towel (since the base of the emulsion is l 'water).
Tip: Be sure to stock up on paper or rag towels while painting to get rid of awkward dirt on the linoleum.
Features of working with different types of paint
Different types of paint require their own disposal characteristics. When removing a stain, you must first determine which paint is absorbed by the linoleum.
water-based
If it's a watery emulsion stain, chances are it can be removed without a problem - it dissolves easily, even if it stays on the surface for a long time. In this case, do:
- To soften pollution, fill it with lukewarm water.
- An hour later, a damp cloth is placed on top and kept for 20-30 minutes
- The stain is washed off with an ordinary brush, then the floor is washed with warm water.
It must be remembered: you cannot remove the remains of the stain with abrasive agents, materials or a metal brush, traces may remain, which cannot be removed later.
Oil
If oil paint gets in (its linseed oil base is thick), wipes are also used to remove the stain, then this place is treated with vegetable oil. This will not allow the paint to be absorbed and will help the mud to come off the linoleum.
In addition to solvents, paint stains can be removed with fabric softener and vinegar.
Hair conditioner
Housewives use a conditioner for washing - a product that gives freshness to washed laundry. For use in place of a solvent, the conditioner is dissolved in water in a one to one ratio.
A cloth is moistened with the resulting composition and placed on the stain.The paint softens after a while, then the stain is rubbed until it disappears completely. After that, the cleaned area should be washed with soapy water.
table vinegar
Table vinegar is a versatile household remedy with a very wide range of applications. It will also help to effectively clean the linoleum surface from stains. Wipe the dirt with a cloth soaked in vinegar until it is completely gone. If the stain persists, you can scrape off the residue, softening it slightly.
Solvents
Using solvents, you can erase many stains on all types of paint: oil, nitro enamel, ink stains, acrylic. To get the result, soak the annoying stain for half an hour: for half an hour and remove:
- White spirit;
- ethyl alcohol;
- ammonia;
- refined essence.
After the allotted time, the dissolved stain can be removed with a spatula. At the end of the removal procedure, the trace of contamination is washed off with warm water.
These are the methods of processing varnish-based oil paints. Using aggressive methods can damage the surface of linoleum flooring.
Nitroenamel
The nitro enamel stain is removed using special aerosol products. Before use, you need to check the effect of the agent on the coating of a piece of linoleum.
Acrylic paint
Acrylic paint contains a synthetic polymer emulsion, which makes it resistant, so it will be difficult to remove the remnants of such paint.
After drying, the acrylic emulsion will firmly adhere to the linoleum, it cannot be washed off with plain water. It remains to carefully clean with a knife. Fresh traces of acrylic paint, such as water emulsion, are washed off with warm water, adding any dishwashing detergent.You can add baking soda and vinegar to this solution. People use degreasing, liquid compounds to remove nail polish.
Construction stores sell special products for removing acrylic paint residue from surfaces.
Apply it with a sponge or cloth on the dirt, wait about 10 minutes. The wash reacts with the acrylic, after which the acrylic is cleaned with a cloth.
Before trying to remove stains with chemicals, be sure to check it on a piece of floor somewhere out of sight, under a sofa or on scrap linoleum. The test will show the reaction of the cleaning agent to the surface material.
ink room
In offices, the printer cartridge is often replaced; inkjet printer cartridges are distinguished by more caustic ink, traces of which, if used carelessly, may remain on linoleum.
To remove such ink marks, it is necessary to clean them in several stages.
- Lather with a pumice stone and scrub with a toothbrush.
- Dip a cotton swab in hydrogen peroxide and gently wipe the black marks from the surface of the soil.
- Wash off any remaining ink with soap.
If the above steps do not work properly, you can try wiping the contamination with solvents. For example, wipe the marks with a cotton ball soaked in acetone.
Fresh dirt from the inkjet printer cartridge can be removed with cold water and soap.
It is impossible to act on the drops of ink with heat, because the paint will only eat deeper into the linoleum.
What to do with a dried stain
To remove dried paint, it is better to use universal solvent 646, all types of linoleum are resistant to it. Apply the product according to the instructions on the bottle. The surface of the linoleum is wiped after removing the remnants of the used product with a mixture of laundry soap and soda.
Some softened parts can be removed with a rubber spatula. At the same time, the soaked paint is carefully removed in one direction with gentle movements so as not to damage the coating.
Using a metal spatula for cleaning is not recommended, as it can damage the linoleum surface.
Tips & Tricks
Here are some simple tips on how to properly wipe paint residue from linoleum:
- To avoid damaging the floor surface, do not work with coarse brushes.
- It is necessary to rub towards the center so that the dirt does not spread on the linoleum.
- Do not use harsh or abrasive chemicals.
- Before use, it is recommended to make a test on the rest of a piece of linoleum, how the agent acts on the coating material.
Attention! Using aggressive methods of cleaning linoleum from paint, you need to be careful not to accidentally spoil the design and quality of the top protective layer.