TOP 20 remedies to remove limestone from the faucet at home
It's no secret that after prolonged use of faucets, limescale appears on them, which must be removed. However, before that you need to figure out how to remove limescale from the faucet and what means they use.
The reasons for the appearance of plaque
Any bathroom or kitchen has sinks with faucets that are hooked up to the water supply. Tap water is not always of good quality and contains various components. It is because of the poor quality of the faucet liquid that white deposits, which are deposits of magnesium and calcium, can appear on the faucets. In addition, plaque formation is facilitated by frequent heating of water to high temperatures.
Major errors
Many people make several mistakes when cleaning faucets from contamination.
Use a metal sponge
Some people use very hard metal sponges to remove plaque.
However, their use is contraindicated, since after their application, scratches and other mechanical damage may remain on the surface. Therefore, it is better to rub the contaminated surface with other products.
Wrong choice of cleaning agent
Before cleaning, you need to choose the right cleaning products, because some of them cannot be used.
Abrasive particles
Sometimes detergents contain abrasive components that can damage faucet surfaces. Therefore, when choosing a detergent, one should carefully consider the substances present in its composition. If it contains a lot of abrasive particles, you will have to abandon the use of such solutions.
Acid
Some people believe that products containing acids are more effective in fighting tartar. However, such formulations are not suitable for cranes and damage their coating. Therefore, to clean the contamination, it is contraindicated to use liquids containing the following acids:
- phosphoric;
- sulfuric;
- salt.
If you use them, the surface will be covered with unwashable dark spots.
A mix of different products
There are times when people mix several detergents at once and use the resulting composition to remove limescale contamination. However, the result of using such mixtures may be unexpected, and therefore it is better not to use them.
How to Cleanse With Home Remedies
There are home remedies that can be used to clean dirty faucets.
laundry soap
To remove plaque, they often use regular laundry soap, which has a disinfecting effect.Experts advise using 72% soap as it is more effective. To remove dirt, the chrome surface is wiped with a bar of soap and rinsed with warm water.
A soda
Many people think that only the ashes are cleaned with baking soda, but this is not the case. Soda-based products effectively combat limescale contamination on faucets.
To prepare a solution, add 300 grams of soda to a liter of water. Then the composition is stirred until a thick mixture is obtained, with which the dirty coating is wiped off.
The vinegar
Vinegar is used to quickly clean faucets and remove limescale. It is diluted with water in a ratio of one to two, after which a cloth is dipped in the prepared solution. Then the liquid is wiped off the surface of the plumbing. After 10-20 minutes, to remove residual vinegar, the faucet is wiped with plain water.
lemon acid
To combat limescale, they use citric acid or freshly squeezed juice. The cleaning of lime contamination is carried out in several stages:
- apply acid to a rag;
- wipe the surface;
- wash off liquid residue with heated water.
Coca Cola
A popular sugary drink like Coca-Cola will help remove dirty plaque from the surface. An ordinary cloth is carefully dipped in a gaseous liquid, then placed on a dirty faucet. After half an hour, the cloth is removed and the surface is washed with water. If traces of plaque remain, the procedure is repeated.
baby soap
Among the non-standard means of removing calcareous contaminants, baby soap is distinguished. Before use, it is diluted in equal proportions with warm water and thoroughly mixed. Then a piece of cloth is moistened in the mixture, which is used to wipe the faucet.After that, it is again wiped with a cloth soaked in plain water.
toothpick
Even ordinary toothpicks, which are found in every home, can clean the coating of sink faucets. To scrape off dirt, gently grasp the toothpick by both edges with your fingers. Then it is carefully applied to the surface and stretched along it. All salt deposits should be quickly scraped off without using additional cleaning products.
Salt
It is no secret that salt is an abrasive material and therefore many believe that it cannot be used to remove limescale contamination. However, if used in small amounts, it will help restore the cleanliness of the faucet.
5-8 grams of salt are poured on a napkin and gently rubbed into the dirty coating. The treated area is then rinsed with water.
Baking soda
It is a versatile product that can be used to fight most stains. Before cleaning, soda is mixed with water to obtain a thick slurry, which is used to treat the stained surface. After 40-60 minutes, the soda is washed off, and the cleaned coating is polished with a dry cloth.
Toothpaste
If there are not many traces of lime on the faucet, you can try to get rid of them with toothpaste. It is applied to a toothbrush, which is gently rubbed over the plaque. It will not be possible to completely get rid of pollution at once, and therefore the procedure will have to be repeated.
baby oil
The least common use for cleaning household appliances is baby oil. This liquid is very effective against tartar and other salt deposits.
Wipe the dirty areas with a cloth soaked in oil 2-3 times.Then the remaining liquid is washed off with hot water.
Overview of special tools
There are several special cleaning products that are often used to clean household appliances.
Purifiers
Among effective cleaning agents, there are five chemicals.
upper house
Ovens, gas cookers and sink faucets can be cleaned with Top House cleaner. The liquid contains components that remove salt deposits from the surface. Simply apply the gel to the faucet, rub it with a cloth and rinse with water.
eyelash bang
A cleaning compound that helps to remove not only traces of limescale, but also other more serious dirt. It is often used to keep bathrooms and kitchens clean. Cilit bang should be used at least once a month so that plaque does not appear on the faucet.
"Sanox"
Sanox gel will help get rid of dirty spots, plaque and even rust. It has disinfectant properties and removes bacteria and pathogens of intestinal infections from the surface. When using Sanox, a small amount is poured on a tap, rubbed with a sponge and washed off.
coffee
It's a cleaning spray. It is evenly sprayed on the plate, after which the treated surface is wiped with wet wipes.
Chrome Rhak Cleaner
If salt deposits or traces of limescale appear on the tap, use Ravak Cleaner Chrome. Before use, this gel is mixed with water, after which a cloth is moistened in the solution and the faucet is wiped with it.
polished
To polish chrome coatings, use special polishing agents.
Domax
Over time, faucets lose their shine and many want to restore it.This can be done using a tool like Domax.
It is an effective gel which, after application, forms a protective film on the treated surface against grease, tartar and other contaminants.
Indesit
Many people use Indesit to polish chrome plating. The benefits of this gel are:
- rapid dissolution of fatty particles and salt deposits;
- it contains no caustic element.
What to do if the faucet is blocked
Sometimes faucets get stuck and stop working properly. In this case, two means are used.
vinegar solution
If the faucet stops working due to salt deposits, you will need to remove it and soak it in a vinegar solution. In this case, the mixture should not be very concentrated. Therefore, vinegar is mixed with water in a ratio of one to three.
WD-40
It is one of the most effective solvents used not only in everyday life, but also in industry. To make the faucet work, you will need to spray all the places where a lot of salt deposits have accumulated.
Subtleties of cleaning the aerator
An aerator is a mesh that is responsible for spraying water from a faucet. Prior to cleaning, the aerator should be removed and inspected for contamination. If there is too much, it will need to be soaked in a vinegar solution for forty minutes.
How to disassemble a blender at home
Sometimes you have to disassemble the mixer in order to clean it from the inside.
Single lever
Kitchen sinks are often equipped with single-lever mixers. To access it, you will first need to turn off the water, get rid of the plug and unplug the fixing screw. Then the ball cap and the mixing block are removed. Only then can it be rinsed from the inside.
Two valves
To clean the inside of two-valve mixers, you will need to unscrew the locking screw.After that, the axle housing of the crane is unscrewed and the gasket is removed.
Ball
Ball mechanisms are used in single-lever designs, so they are disassembled the same way they are. First, the plugs with fasteners are removed, after which the external mixing block with a ball mechanism is unscrewed.
Cascade
Cascade mixers have a rather complex design, so they are not easy to disassemble on their own.
It is recommended to entrust this work to professional specialists in the repair of plumbing fixtures.
Conclusion
The tap is gradually covered with limestone which must be removed. To remove such contamination, you need to familiarize yourself with the basic tools and methods for cleaning chrome coatings.