20 best tools that and how to quickly clean the hood in the kitchen from grease

In order to properly clean the kitchen hood from fat deposits, you need to know how and what is the best way to do it. There are a huge number of tools that will come to the hostess to help - from folk improvised methods to professional cleaning liquids. The choice is dictated by the degree of soiling and the material of the hood.

signs for cleaning

The hood is an indispensable attribute of modern kitchens, which not only eliminates unwanted aromas, but also complements the interior in terms of composition. In order for the device to perform its functions well and look good, it is necessary to carry out timely cleaning of the interior and exterior, preventing the aging of fatty deposits. When using the hood at home, it is recommended to clean it about once a month, but there are a number of signs indicating the need for urgent care:

• On modern technology, a special sensor is installed with the image of the grill icon or the letter "C", which lights up at a certain degree of contamination. With such an indicator, it is not difficult to understand when to wash the device.
• When there is no sensor, conclusions about required maintenance can be made based on the change in the hum of the hood. It is urgent to clean it if the sound during operation is unusual, louder.
• Elimination of abnormal odors. The smell disappears worse and slower than before, you must select a more intense mode to eliminate it effectively - cleaning is necessary.
• The easiest way to understand that the hood needs to be washed is to conduct a visual inspection. By regularly visually checking the degree of soiling of the parts, you can determine that it is time to clean them.

Preparing to clean the extractor hood

Before proceeding with the cleaning procedure, you should prepare everything you need for this: cleaning liquids or powders, gloves for the hands, dishes for soaking the filters, brushes and sponges.The hob, cutting table, worktop, walls and floor - all surfaces near the hood - are best covered with aluminum foil or paper so as not to stain.

If you plan to use strong drugs, it is best to open vents in advance and work in a well-ventilated area.

Read the instructions

Before cleaning, you should read the instructions to clarify the following points:

• how to properly remove the hood;
• what materials the different parts are made of (this will determine the choice of authorized and prohibited cleaning methods for the different surfaces);
• what type of filters are installed: disposable or to be cleaned;
• which detergents are preferable.

Mains disconnection

The hood can only be disassembled after disconnecting the power supply. Since the device is electrical, safety precautions must be followed.

General disassembly procedure

In order to thoroughly rinse not only visible surfaces, but also the inner parts of the hood, it must be dismantled. The electric or gas stove, above which the hood is located, is covered with a cloth, film or paper so as not to stain and lose parts of the hood. How to properly disassemble hoods of different types and manufacturers is indicated in the instructions, but, as a rule, the following steps are followed:

• First you need to remove the upper part of the case or the decorative panel.
• After that, it is the turn of the grease grid which protects the internal cleaning device.
• Next, remove the air or charcoal filter.
• If the design provides for an air duct pipe, remove it.
• To facilitate access to the internal parts, the hood is removed from the supports of the cabinet, the wall or the ceiling.
• The motor and fan are removed by first removing the protective cover (usually this requires unscrewing the bolts).

Small parts and fasteners should be bent carefully so that no problems arise during reassembly.

Ways to clean the grease filter at home

The grease grid is the part of the hood most sensitive to dirt. For intensive cooking, it is better to clean the grid once or twice a week, in which case it will not be necessary to exert much effort and it will be easier to achieve the desired effect. Many manufacturers allow and even recommend washing the grease filter in the dishwasher; with regular cleaning, this measure is sufficient.

At home, there are many ways to deal not only with fresh dirt, but also with old fatty deposits.

Soap-soda solution

A soda solution will help remove the filter plate from the filter mesh - it is a versatile cleaning agent that is environmentally friendly, effective and inexpensive. 5 liters of hot water will require a quarter glass of baking soda. Alternatively, they take laundry soap, for which they rub half a bar on a grater or rub with bar soap directly on the grid. Liquid soap (a few tablespoons will do) or dishwashing gel will also do the trick.

Look at Also

What means will help get rid of the infestation of fleas in the apartment and house

The solution is stirred in a basin or bucket, the filter is placed there for half an hour, after which the softened dirt is wiped off with a brush or sponge. The last step is to rinse the mesh well under running water. If the procedure does not completely help to remove dirt, you need to repeat it.

"Mole"

The Mole type pipe cleaner is radical, very effective, but not at all useful for the filter material, so it should not be abused. It is recommended to use the "Mole" no more than once every six months only if the fat deposits are so heavily eaten that no other remedy can cope with it.

The grease pan is completely filled with boiling water, to which half a glass of blocking agent is added. It is enough to soak for 3 minutes, if you keep it longer you can damage the material of the grill. After that, the filter should be rinsed well, and the solution should be poured into the toilet.

Degreaser

There are many different degreasers on store shelves. Advisors familiar with the range will help you choose the most suitable cleaner for your hood. You can read the composition, instructions and independently choose a degreaser that is satisfactory in price and quality.

"Shumanite Bugs"

The cleaning agent from an Israeli manufacturer is known for its effectiveness and speed of action. Recognized as environmentally friendly and environmentally friendly. Available in spray, gel and powder form. The use of "Bugi Shumanit" is prohibited for aluminum surfaces, painted parts, Teflon coating.

The concentrate is applied to the filter grid of the hood for a short time (according to the instructions, a few seconds are enough), after which it is washed off with a sponge and washed well under running water. Repeat the procedure if necessary.

The advantages of the remedy include its instantaneous action and the ability to cope with even strong fatty contamination. It is also important that you do not need to scrub the surface to be cleaned with force.

The biggest drawbacks of the product are its toxicity and strong unpleasant odor.It is necessary to work only in protective gloves and with an open window. Before cleaning, be sure to remove all food in the inaccessible area, it is impossible for the product to get on the food.

"Bugs the Giant"

Another remedy from the Israeli company "Bugs", designed to remove old and burnt fat spots. In order to remove grease, "Giant Bugs" is applied to the surface of the hood filter for a few seconds, then washed off with a damp cloth. The consumption of the cleaner is very economical due to the convenient spraying and the consistency of the liquid.

The Bugy Giant is also very aggressive, so wearing gloves is strictly mandatory, as is ventilation.

"Sparkling Kazan"

On the packaging, it is indicated that the product is only intended for cleaning cast iron pots, but it is also resistant to old grease on other surfaces. The cleaner is applied to the filter grid of the hood for 15-30 minutes, after which it is washed off with water, and the washed surface is neutralized with a weak solution of citric or acetic acid. If the contamination is strong, you need to pour the product without regret and leave it longer, you can repeat the procedure several times. Use with rubber gloves.

oven cleaner

Amway's Oven Cleaner is designed to clean burnt-on grease, food, and burnt-on sugar from ovens, stoves, trays, and grills. To remove dirt from the cooker hood filter, shake Oven Cleaner well and apply it to the surface with a brush, let it sit for 30 minutes, then wash the mesh, wiping the softened dirt with a cloth or sponge soaked in 'Hot water. A heavily soiled range hood filter screen may require reapplication.The gel is not used to clean aluminum, painted and chrome surfaces.

Terms of use

The principle of using any fat remover is the same. The product is applied to the contaminated surface of the hood filter, left for about half an hour, then wiped off with a damp sponge. The mesh is washed with water. Always use protective rubber gloves, otherwise the skin of the hands can be seriously damaged.

Boil in a soda solution

A boiling soda solution effectively fights old fatty deposits. For this method, all you need is a saucepan, large enough for the range hood filter to fit completely or at least halfway, water, and baking soda itself.

A little soda is added to boiling water at the rate of 1 glass per 10 liters of liquid. After dissolution, the mesh is immersed in water and boiled over low heat for 10-15 minutes. If the trellis does not fit completely, treat one half first, then the other. In case of very heavy contamination, the procedure is repeated.

Look at Also

How to quickly get rid of two tails in a private house and apartment

Use laundry soap

Laundry soap is rubbed on a fine grater so that it dissolves more easily and added to boiling water. The hood mesh filter is placed in the solution for a quarter of an hour. After softening oily contaminants, the filter should be washed with a sponge or scraper.

How to clean the filter with a 9% vinegar solution

The concentration of the vinegar solution depends on the degree of contamination. For fresh grease stains, just mix vinegar and water one by one. For old fats, it is better to use pure vinegar.With a sponge or cloth, apply vinegar to the hood filter, thoroughly wetting all contaminated areas, and leave for 15 minutes. After soaking, the vinegar should be washed off with clean running water.

With lemon

If you want to clean the hood filter without using harsh chemical cleaners, you can use a natural remedy - lemon juice. This will require several fruits. Cut the lemon in half and rub the surface of the grate with a cut. After 15 minutes, the mesh should be washed with a sponge and running water. In case of stubborn dirt, it may be necessary to repeat the cleaning several times.

How to clean the case

It is very easy to clean the hood body from the outside without disassembling the whole hood, since these surfaces are not hard-to-reach areas. It is better to do this after each cooking, before the fatty drops have time to dry, so it will be faster to remove them. You can immediately wipe up spills from the outside of the hood with a damp paper towel or cloth, keeping it looking pristine and saving a lot of time.

What not to use

Depending on the case material, there are restrictions on the use of cleaning methods. It is possible to remove contamination without altering the appearance of the device, keeping in mind a number of methods and means that must be excluded.

Alcohol products

To clean the exterior of the hood, do not use products containing alcohol. After cleaning with their application, the material may tarnish.

Solvents

Strong solvents also cause dulling. It is best to choose a neutral cleaning agent.

Aggressive cleaning agents

Harsh cleaning agents will dissolve grease quickly, but do irreparable damage to your appearance. They cannot be abused. This is another reason why cleaning the visible surface of the hood body should not be delayed, but should be carried out regularly. In this case, a damp cloth with anti-dust and dishwashing gel and liquid soap against fresh grease stains will suffice.

Sponges and stiff brushes

Sponges and hard brushes, especially metallic ones, are strictly contraindicated. If you rub the body with it, especially with effort as the surface is easily scratched.

Cleaners with abrasive particles in the composition will have the same effect, so they should also be avoided.

Dishwashing liquid

You can use any liquid dish detergent to clean the hood body. It won't harm the surface, but it will resist grease stains. With a liquid applied to a soft sponge, gently wipe the parts of the body. After that, wash the product with a clean cloth and wipe dry.

laundry soap

Regular brown laundry soap will successfully remove dirt. Simply lather up a sponge and wipe down visible surfaces, then rinse off the cleaner. Do not heavily dampen the cloth with water; use a damp sponge wrung well so that the liquid does not penetrate inside the case.

How to Clean a Fan and Motor

The extractor hood fan and motor should be cleaned every two years. To find out how they are attached and how to remove them correctly, you need to carefully read the instructions. As a rule, there are no difficulties.

After removing the fan, you should wash the impeller with soapy water or wipe it with alcohol.Any detergent can be used, except for detergents that are too aggressive or abrasive, so as not to damage the surface. The washed part must be dried before reassembly.

Caring for the engine means wiping it from soot and dirt and renewing the lubricant.

Features of air duct maintenance

During the "general cleaning" of the hood, attention should also be paid to the air duct. The pipes are not so narrow that accumulated dirt will interfere with the operation of the hood, but grease particles accumulate on the walls, which are better to remove regularly. The air duct is cleaned approximately every two years.

Hood air ducts are made of plastic or corrugated cardboard. Duct maintenance will be different depending on the type of duct.

Rectangular or round plastic

Plastic air ducts are rectangular or circular in section. Removing them is simple as they are made up of individual plastic segments that are easy to assemble and disassemble. Rinse with sufficient soapy water, then under running water, and dry thoroughly before reinstalling.

Look at Also

30 Most Effective Home Remedies To Get Rid Of Moths Forever

Corrugated

A corrugated air duct is a little more difficult to maintain, because more dirt settles on a corrugated surface than on a smooth plastic surface. Made of aluminum, such an air duct is easy to install and costs less, which is why many people prefer them. If the hose is long and difficult to clean, you can simply replace it with a new one.

The corrugated duct can be cleaned without completely disassembling it. To do this, separate its end from the hood and clean it with a brush and soapy water, as long as the length of the brush is.

steam cleaner

The steam will help remove fatty deposits easily by dissolving them.In this case, the steam cleaner does not cause corrosion. After steam treatment, the pipe is washed with a soapy solution, clean water and dried.

"Mole"

"Mole" has a less gentle effect, but it will effectively remove all dirt. It is applied to the contaminated surface of the air duct for half an hour, then washed off. If necessary, process in this way several times.

Remove dirt from buttons and interior

The buttons and the control panel are cleaned with specialist sprays as they become dirty. The cleaner is sprayed on the contaminated area and wiped off with a towel. Of the folk remedies, hydrogen peroxide, ammonia, anise drops, nail polish remover are most often used. The tool is applied to a cotton ball or cotton swab and carefully wipe the pimples, not forgetting to press them and process the connector. An old toothbrush can help remove dried grease.

The inner surface of the hood should be washed quarterly and can be treated with the same products as the body. If the pollution is old, the Mole will take care of it, but it should not be abused. After cleaning, the surface should be washed thoroughly with clean water and dried or wiped dry.

Folk remedies

If the hostess does not want to use chemicals or they are not at hand, you can always resort to folk methods. They are more environmentally friendly, less harmful to health and often less expensive than professional cleaning powders or gels. If the pollution does not give in the first time, you can try to repeat or combine the methods.

bar soap

It is better to take ordinary brown laundry soap with an acid content of 72%. For better preparation of the soap solution, the bar is grated.The part to be cleaned, depending on the size and degree of contamination, is soaked in a solution or the mixture is applied with a sponge to the surface. Leave for some time, after which the softened dirt is removed with a sponge or a plastic scraper.

Lemon juice

Cut the lemon and wipe the dirt with the pulp. Instead of fresh fruit, you can dilute citric acid.

To smoke

The steam generator will help both dissolve grease on the housing in a surface-friendly manner and reach hard-to-reach places such as the inside of the flue pipe. After exposing the deposits to steam, all that remains is to wipe off the softened dirt with a cloth.

baking powder for dough

You can use a packet of baking powder to fight body fat. The powder is dissolved in water, applied to the contaminated area for half an hour. When applying the solution to the stain, the baking powder turns yellow and absorbs grease. After cleaning, rinse with water.

Mustard powder

Mustard powder is mixed with water and a sponge is applied to the fatty deposits. After a quarter of an hour, the solution is washed off with warm water.

How to clean the charcoal filter

Unlike a grease filter, a carbon filter is disposable, it is not cleaned but replaced with a new one. Activated carbon inside the filter, developing its capabilities, ceases to work properly. The period for replacing the carbon filter is indicated by the manufacturer, as a rule, it lasts several months, but with intensive cooking with the hood on, a new filter may be needed sooner.

To replace the carbon filter, remove it from the special slot and insert a new cartridge. On sale you can find both branded filters from the manufacturer and cheaper universal equivalents.

There is a little trick to extend the life of the carbon filter. The hood does not need to be turned off immediately after the end of cooking, it is better to leave it on for 10 minutes. During this time, the charcoal will dry out, evaporating the liquid it absorbed during cooking. If the accumulated moisture is not removed, the charcoal will clump together and lose its functionality more quickly.

Prophylaxis

In order not to spend a lot of time and effort on removing the accumulated grease on the hood, it is necessary to regularly clean all parts, both removable and non-removable. Prompt cleaning will preserve the beauty and functionality of the appliance that occupies an important place in the kitchen, and will also act as a prophylaxis against possible breakdowns and malfunctions that may be caused by excessive accumulation of dried grease.

Thus, washing the hood is not such a difficult process. It is important to do this regularly so that the device works faithfully for a long time to the delight of the hostess.