DIY step-by-step instructions for making a church or temple from matches

Building a church from matches is a very complex and time-consuming process that requires compliance with a number of rules. First of all, you need to choose the right adhesive for fixing the product elements. Compliance with manufacturing technology is not negligible. Therefore, it is so important to study all the details of creating a composition and clearly adhere to key recommendations.

What glue to choose for crafts from matches

You can make crafts from matches using all types of glue. However, experts advise choosing a composition that, after drying, acquires a transparent shade. It makes the finished product more appealing.

AVP

To create products from matches, PVA glue is used. Such a substance can be used in the manufacture of crafts with a child. The composition contains an aqueous emulsion of polyvinyl acetate and adheres well to wood, which is very important in this situation.

Carpenter

This adhesive is essentially an improved version of PVA. The composition quickly and easily fixes the material.

Instant Combat

This is a kind of Moment glue, which is designed to fix wood and allows you to achieve the effect in 1 second. The composition is suitable for crafts from matches, since after hardening it is not visible.

How to make a church or temple with your own hands

Making a church is quite a complicated process. It may take around 2,000 matches. To do this, you need to follow these steps:

• It is recommended to start creating a structure with a single-layer square. When constructing it, matches should be placed in one direction.
• The second square should be assembled so that the gray match fragments are located exclusively on top and on one side. Excess sulfur will need to be cleaned off.
• In the first square, make one more layer to the vertical walls.
• Build another layer of walls. This is done so that all the sticks point in the same direction.
• Pick up the same square as the first, but place the sticks in a different direction.
• Place the cubes next to each other. On average, make another layer of walls. They are placed on the sides where they do not touch other squares.
• Cut the matches on each side if the cubes are not too tight.
• Connect the cubes by pushing wooden sticks through them. Clean the back wall with a blade.
• Duplicate construction.

• Make a standard square. In this case, the sulfur must be removed from above.
• Cut the cube. For this, it is recommended to cut the logs.
• Cut the surface of the cube on the board.
• Place 8 sticks in the prepared structure. They are used to attach the cube to the bar.
• Attach the parts to the prepared place.
• Make a second foot and prepare a square on the board. For a firm fixation, the inserted matches must be pressed. Make an arc under the middle square. Thanks to this, it will hold perfectly.
• Repeat the same steps for the second plank.
• Prepare the middle board. Build 3 cubes.
• Insert the logs horizontally into the 2 outermost cubes in front. On the other side, place them in the same way, but vertically. Sand the structural elements to make the surface smooth.
• Insert vertical logs into the middle square. They must be made equal. Coins are inserted horizontally from the front and back.
• Fix the cubes.
• Connect the structure with ready-made strips using matches.
• Make ramps. To do this, just push the sticks from the inside.
• Make 4 small towers on the sides.
• Make domes out of aluminum foil. You can decorate the church with crosses. It is also allowed to use windows and doors.

Look at Also

Rules and good practices for ironing curtains after washing

Step-by-step instructions for creating a volumetric church in the picture

Creating a three-dimensional painting of a church can become a real interior decoration. For this, it is worth preparing everything you need. To get a quality product, you need to take matches, cardboard, glue. You will also need a stain, a frame.

First, you need to create a background on which you plan to place the product. An excellent solution would be a landscape or a plain background, on which there is a slight embossing. Preparing the chart will help determine the size of the future church. Then it should be mentally divided into 3 levels. The bottom one should be the biggest.

First floor

To create the first floor, do the following:

1. Make a model for the first floor. To do this, it is recommended to take cardboard or thick paper and apply all the elements of this landing.As a result, you should get 5 small parts - the front part, the floor, the roof of the first floor, 2 side parts. They must be cut out.
2. It is worth using glue to fix the patterns. Thanks to careful gluing from the inside, the structure is resistant to external physical influences.
3. After that, you can proceed to the matches. In order for them to acquire a beautiful natural shade, they must be soaked in a dye solution.
4. Then you need to take a few matches and cut them into bricks. Their length should be 0.5 centimeters. Glue on the resulting window and door fragments. It should be done in a circle. Use the remaining bricks to simulate masonry.
5. For the procedure, it is recommended to shift each subsequent row by half a stick to the side. Perform similar actions with the sides. To make the church look realistic, you need to sand its surface with a file.
6. Glue the windows from the inside with a lattice. It is best to use a mosquito net and a piece of aluminum foil attached to the back.
7. It is allowed to decorate the first floor with an icon. To do this, it is worth choosing a picture that fits the size and sticking it on the door.

Look at Also

What is the best laminate to choose, descriptions of varieties and selection criteria

Second floor

This design should be smaller than the previous one. For its construction, the following actions are performed:

1. Patterns are made according to the same principle and fasten to each other.
2. To get a clearer distinction, gluing the structure in a different way will help. Long matches should be applied vertically along the entire length, and the rest of the space should be filled in the same way. In this case, the duration of the match should be reduced.
3. Next you need to do the windows.For this, it is recommended to prepare colored foil and small pieces of cardboard. After that, glue the foil to the cardboard and fix it in place of the windows. To make them look more natural, it is worth making a frame. For this, it is recommended to take 3 matches.

Third floor

Then you can start making the third floor. It has no fundamental differences, but at the same time it has the smallest dimensions. To create a structure, you must do the following:

1. Cut small pieces of cardboard and glue them together to make a box.
2. Glue the upper tier with vertical sticks.
3. It is not at all necessary to strictly follow the instructions - it is quite possible to leave room for a flight of imagination. If there are doubts about the proposed algorithm, this step can be modified or create your own version.

assembly of the church

The resulting blanks should dry well. This will prevent warping during assembly. They should be glued from largest to smallest. It is done from the bottom up. It should be borne in mind that all tiers should be located strictly in the center. Even a slight bias will lead to a deterioration of the result.

In order for the church to look whole, and the joints not be visible, it is worth making roofs in the form of canopies.

Having pasted them on the picture, it is easier to determine the dimensions. To do this, it is worth measuring the places of location of the cornice and cutting out 3 fragments of cardboard. The result is roofs for three floors. The pieces must be of different lengths.

In the absence of colored cardboard, it suffices to apply the elements to a white surface and to glue them on with paper of a suitable shade. Then the front and side parts must be glued very carefully.It can be done in any order.

Creation of foundation

Then you need to do the base. To determine its dimensions, it is worth trying on the width of the board and subtracting 1.5 centimeters. The resulting value is equal to the length of the base. After that, you need to cut out the part. To achieve harmony, it is worth covering it with the same material as the roof slopes. It is recommended to fix the leaderin with hot melt glue. Thanks to the use of a glue gun, it is possible to quickly fix such material. As a result, it clings quickly. To reduce the risk of peeling, it is worth exposing the bonding areas slightly.

The resulting church differs from the real one only in the absence of thresholds. To make them, it is worth cutting a strip 60 millimeters wide and 90-110 millimeters longer than the door. Carefully attach it to the base of the door, being careful not to smudge anything with glue. The threshold should be pasted with matches.

Look at Also

How to fold panties correctly and compactly, TOP 10 ideas for convenient storage of underwear

Awning manufacturing

To protect the porch from rain, it is worth making a canopy. To do this, you need to remember what the visor looks like. To obtain a solid structure that will not collapse, it is recommended to use the accessories. To maintain a canopy, it is permissible to use a chimney match. Wooden skewers will also work. All fragments must be measured and cut, then glued. For convenient fastening of the element, similar brackets should be made near the door. They play the role of trays and hold the visor.

It is necessary to measure the equal distance between them. In real churches, the canopy looks like the roof of a house.Therefore, it is worth making the required length and making a piece of cardboard wider than the threshold by half a centimeter.

Having determined the bend line, it is worth making the front part and moving on to the base. The fragments must be tied together and fixed in the picture. Then you need to cut out the cardboard elements of the dome and glue them with a suitable material. When the dome is dry, it should be glued to the base in the form of a support.

Additional tips and tricks

Working with matches has certain features. To fix such elements, it is permissible to use any type of glue. However, to achieve a beautiful and accurate result, it is worth using a composition that, after drying, acquires a transparent consistency. The best options are:

• AVP;
• Carpenter;
• Instant grip.

Preparing for the procedure is also important. In this case, it is worth calculating in advance how many logs are needed to create a structure. For a small product, 3-4 boxes are enough. If you plan to make a large structure, you need to take at least 10 boxes. It is definitely worth preparing a workplace. It is important that it is clean and tidy. Adequate lighting is essential. Exposure to drafts on the desktop is unacceptable. Before starting work, the surface must be covered with a film. A protective film is perfect for this. However, a completely flat and stable surface is considered a key requirement for a workplace.

In addition, in the process of work, the following recommendations should be observed:

1. Prepare the adhesive composition and the container into which it is planned to be poured.
2. For convenience, it is recommended to pick up the substance with a sharp match or toothpick.
3. For the front of the product, it is worth choosing matches that have a flat surface.
4. If desired, match heads can be cut off. This is done with a knife or scissors. As a result, it will be possible to obtain a smoother structure. This work is recommended for adults. Children should be kept away from sharp objects.

Making a church out of matches is not that difficult. The main thing is to choose the right materials and properly arrange the workplace. To get a neat structure, you need to choose a glue that, after hardening, acquires a transparent consistency. Strict compliance with the rules of procedure is not negligible.