Interesting ideas for crafts from pallets for a summer residence and how to do it yourself

Initially, pallets were created for the storage and transportation of various goods. But later these products found other uses. Beds, tables, containers for growing plants and other structures are made from pallets. Some craftsmen build full-fledged structures for storing household items. There are other types of do-it-yourself pallet crafts, both for summer cottages and for home.

Advantages of using paddles and pallets

Among the advantages of using pallets and pallets in the manufacture of crafts, the following stand out:

• initially solid construction;
• respect the environment;
• long life expectancy;
• availablity.

It is recommended to sand the pallets on all sides before doing crafts.Pallets that have been used in markets or have been treated with formaldehyde paint should not be purchased to create household items.

As with other wooden structures, pallets are prone to rotting. Therefore, finished crafts should be covered with protective paint and periodically treated against pests.

interesting ideas

There are many options for using pallets in everyday life. Tables, beds, benches, deck chairs and other structures are made from these products. The increased demand for pallets and pallets among owners of summer cottages is due to the fact that the former are made of durable wood species that can retain their original properties under the negative influence of the environment.

Low table

To make a coffee table, two pallets are needed, which must be stacked on top of each other and fixed with nails. The end result is a sturdy structure with makeshift shelves for storing small items. You can supplement such a table with wheels and plywood, which is laid on the boards.

Look at Also

Do-it-yourself rules and methods for eliminating the squeak of parquet

Bench

To create a bench you will need:

1. Divide the pallet into 2 pieces, leaving one with three boards and the other with four.
2. Fasten the parts with self-tapping screws at right angles. In addition, it is recommended to nail on the sides of the board, which will increase the strength of the bench.
3. Saw and fix the 4 legs.

After that, the bench should be treated with an antiseptic material.

Armchair

The chair is made using a different algorithm. To create the product, you will need to install two pre-polished wooden structures.Then, for the other two, cut all the boards (except the most extreme ones) along the side of the bars and install the resulting parts on the first ones. For more secure fastening, it is recommended to connect these elements with the help of corners.

Sofa

The sofa is made according to the same principle as the bench.At the same time, at least two pallets should be laid on the base of the garden furniture, which in this case will also play the role of legs. The sofa designs are different, but the manufacturing algorithm is always the same.

Hanging bed

To create a hanging bed, you will need to attach two pallets together using metal plates or planks. The final design should look like stock. Then it is necessary to drill holes in the corners of the outer boards, into which chains or ropes must then be inserted and fixed. These are used to attach the bed to a tree or other support.

tiered bed

To create a multi-level bed, you will need to mount a base of 6 pallets. Then attach the second layer of this structure on top. On the third level, you need to install 2 pallets each.

Bar counter

A bar counter can consist of three pallets installed vertically and buried in the ground. This structure must be additionally fixed on the sides with corners. It is recommended that the worktop be made of thicker boards.

Floor

Installation of flooring begins with leveling the surface. In addition, stones, bricks, construction waste or boards are laid out on the prepared ground. The pallets are installed on top and fixed together. The number of the latter is selected depending on the desired dimensions of the floor covering.

Finally, the wood is treated with materials that prevent rot.

Floor in the master's premises

From pallets, you can create a floor that fits into the outbuildings. To do this, you will need to dismantle the finished structure, leaving the central boards, which will act as a crate. And then you need to lay plywood on top.

Look at Also

15 Better Ways to Eliminate the Burning Smell in an Apartment Than Eliminating It After a Fire

Hanger

The hanger is made from the pallet base. To do this, it is enough to remove the nails connecting the top of the product to the bars. Then you need to sand the structure and hang it on the wall, attaching hooks to it.

swing

To create a lounge chair, you will need:

1. Place two pallets on top of each other, forming the bottom of the lounge chair.
2. Take a wider pallet and remove the bottom and half of the top boards, as well as the side boards.
3. The back obtained in the second stage is fixed with the help of side boards to the base. Bars are additionally installed at the rear.

At the end of the assembly, the finished deck chair must be painted.

shoe rack

The one-piece pallet is used as a shoe rack. In addition, this product can be cut into separate parts, each of which serves as a place for storing wardrobe items.

Fence

The fence using these products is mounted according to a standard algorithm. First, metal pillars are installed along the boundaries of the site, which are poured with concrete. Pallets are then fixed on these supports.

Alcove

The principle of erecting a gazebo using such products does not differ from the construction of such structures using other materials. First, the foundation is laid on the site. Above them, pallets are installed vertically and fixed to each other. At the end of the work, the roof is mounted.Also, if necessary, the walls can be sheathed with plywood or other material.

Vertical gardening of the site

This option for landscaping the site has gained popularity in recent years. And the envisaged designs simplify the manufacture of products for planting plants. To do this, it is enough to install one or more pallets on the construction site and hang or place containers with earth between the boards. Plants can then be planted in the latter.

Shelf for flowers and garden tools

Pallets are often used to organize a place on the site where tools are stored or potted flowers grow. In addition, in this case, you do not need to disassemble the product.The latter must be installed vertically and fixed to a strong support.

The resulting design allows easy access to garden tools while keeping the tools securely in place.

Lamp

Luminaires from products intended for the transport of goods come in different forms. The creation of such chandeliers is carried out according to different schemes, depending on personal preferences. In particular, the pallet rack can be suspended by fixing several lamps between the boards.

Look at Also

How to beautifully paint a blanket with your own hands, ideas and step-by-step instructions

Wardrobe or chest of drawers

To make a wardrobe or chest of drawers, you will need to separate several pallets by removing the bars. Then you need to take three parts and tie them together. After that, you can hang the doors and install it inside the shelf or fix the hanger. As in other cases, various schemes are used in the manufacture of cabinets and chests of drawers.

Sandbox fence

This type of application of products for the transportation of goods is also widely used.To create a fence, the initial structure must be divided into several parts, deepened and covered with plywood or other material that will retain the sand.

Nightstand

As with the chest of drawers, there are many options for creating a bedside table. The main thing is not to forget that after completing the manufacture of home furniture, you will need to sand each part.

Bicycle parking

To create a parking space, you will need to install two pallets vertically and horizontally and then attach them together. Such a stand will securely hold the bike.

Place for a pet

Pallets can be used to create large and small structures suitable for sleeping pets. There are many options for making such products.

Staircase in the apartment

To erect a staircase, you will need to stack several pallets on top of each other in sequential order and connect each product to each other. The finished structure must be fixed to the floor and to the wall.

Track

The path on the garden plot is erected according to the same scheme that was used when installing the flooring.

Tips and tricks for beginners

When planning the creation of crafts, it should be borne in mind that pallets differ from each other both in size and in the type of wood. Europallets with dimensions of 800x1200 millimeters are often used.

When making the described crafts, it is also important to take into account that wood decays and fades over time. Therefore, the finished product must be periodically cleaned and treated with an antiseptic.

Examples of ready-made solutions

Using examples, you can choose for yourself a good false option that is suitable for a summer cottage.