The main ways to remove a mosquito net from a plastic window
The presence of a mosquito net on the window prevents insects from entering the room. As a rule, the structure is used only during a warm period when frequent ventilation is required. Asking the question of how to properly remove a mosquito net from a plastic window, you need to understand a few nuances.
General rules
In order to avoid common mistakes when dismantling a structure, you need to take into account simple general rules. Including:
- it is best to remove the product in favorable and calm weather;
- if possible, an assistant should hold the net from the inside;
- the fasteners can be removed through the adjacent frame.
Basic methods by type of fastening
Before dismantling, you need to know the design features of plastic windows, since the fasteners may have distinctive features. Modern mosquito nets are installed both outside and inside the premises, which is especially convenient in the presence of a spring pin.
This type of fixing is more expensive, but easy to install and appreciated for its solidity.
In most rooms, frame-type mosquito repellents are installed, that is, a fine-mesh frame. There are also suction cup nets, roller nets and others.Some varieties can be twisted or assembled to protect against external influences, and simpler designs will have to be removed.
Frame
This type is attached to plastic windows using corners, pockets or flag clips. Fastening is carried out at the corners of the product from the side of the street. To remove the structure, you need to deflect the lower part of the opening and immediately begin to lift it by the plastic handles. When the corners below come out of the fasteners, the frame should be picked up and brought horizontally into the room.
A product with mounting angles attached to the frame is disassembled in the same way - the structure is lifted, deflected and removed from the latches. The hook mesh can be easily removed when lifting and tilting the frame. In this case, the clamps themselves are not dismantled from the frame.
Slippage
The sliding version of the nets is fixed on the openings with the help of a built-in guide, which at the same time serves as a rail along which the product moves. There are models with two guides - in this case they are below and above.
To disassemble the sliding mesh, you need to lift it and remove the roller from the hole. Then it remains to lower the structure and separate it from the opening.
A subspecies of a sliding mosquito net is a pleated design. It differs in smaller dimensions and convenient folding when opening. A similar product is disassembled by analogy with the classic sliding version.
On the pistons
The piston type involves the use of pins and is considered the most durable. The grillage is fixed in the window opening on spring-loaded pins, which are inserted into specially made recesses.To remove the product, you must remove the pins from the holes by turning them clockwise. Do not turn the plunger in the opposite direction as this may damage the part.
old sample
To dismantle old-fashioned mosquito nets, which are nailed or screwed with self-tapping screws, you will need to use a screwdriver or wire cutters. The clamps are removed from the frame, after which the product itself is removed. You can hide the remaining recesses in the frame with putty. If the fence is hinged, you must remove the structure by lifting it.
hooked
The dismantling of the model on hooks is carried out by loosening the screws and turning the hooks inwards. The lower hooks must not be turned. Then the structures are pushed in and out of the opening.
Roll
The most difficult thing is to remove the roll version, because you will have to dismantle the entire mechanism as well as the guides. The difficulty lies in the fact that the support is located on the street side, and when unscrewing the screws, you need to keep the whole structure suspended. The easiest way is to roll the product into a roll and hide it in a special container.
Tips & Tricks
A product with a simple type of fastening should always be removed for the winter period, since it can be damaged by the influence of cold weather. Dismantling should be carried out carefully so as not to disturb the structure of the material. If the structure is made of a durable material, then it is allowed to use it permanently. When deciding on the need for disassembly, you must take into account the weather conditions and the type of product.